Skip Nav Destination
Issues
April 2003
ISSN 0889-504X
EISSN 1528-8900
In this Issue
Technical Papers
Combustor Turbine Interface Studies—Part 1: Endwall Effectiveness Measurements
J. Turbomach. April 2003, 125(2): 193–202.
doi: https://doi.org/10.1115/1.1561811
Topics:
Combustion chambers
,
Flow (Dynamics)
,
Pressure
,
Turbines
,
Coolants
,
Film cooling
,
Cooling
Combustor Turbine Interface Studies—Part 2: Flow and Thermal Field Measurements
J. Turbomach. April 2003, 125(2): 203–209.
doi: https://doi.org/10.1115/1.1561812
Topics:
Flow (Dynamics)
,
Combustion chambers
,
Vortices
,
Pressure
Effects of Aeroderivative Combustor Turbulence on Endwall Heat Transfer Distributions Acquired in a Linear Vane Cascade
J. Turbomach. April 2003, 125(2): 210–220.
doi: https://doi.org/10.1115/1.1559897
Measurement and Prediction of the Influence of Catalytic and Dry Low Combustor Turbulence on Vane Surface Heat Transfer
J. Turbomach. April 2003, 125(2): 221–231.
doi: https://doi.org/10.1115/1.1559898
Topics:
Combustion chambers
,
Heat transfer
,
Turbulence
,
Pressure
,
Reynolds number
Heat Transfer in Turbulent Boundary Layers Subjected to Free-Stream Turbulence—Part I: Experimental Results
J. Turbomach. April 2003, 125(2): 232–241.
doi: https://doi.org/10.1115/1.1538622
Topics:
Boundary layer turbulence
,
Heat transfer
,
Turbulence
,
Boundary layers
,
Wire
,
Skin friction (Fluid dynamics)
,
Uncertainty
,
Enthalpy
Heat Transfer In Turbulent Boundary Layers Subjected to Free-Stream Turbulence—Part II: Analysis and Correlation
J. Turbomach. April 2003, 125(2): 242–251.
doi: https://doi.org/10.1115/1.1538623
Leading-Edge Film-Cooling Physics—Part III: Diffused Hole Effectiveness
J. Turbomach. April 2003, 125(2): 252–259.
doi: https://doi.org/10.1115/1.1559899
Topics:
Coolants
,
Diffusers
,
Film cooling
,
Heating
,
Physics
,
Simulation
,
Turbines
,
Flow (Dynamics)
,
Cooling
,
Navier-Stokes equations
Numerical Investigation of Heat Transfer in Turbine Cascades With Separated Flows
J. Turbomach. April 2003, 125(2): 260–266.
doi: https://doi.org/10.1115/1.1556014
Effect of Endwall Motion on Blade Tip Heat Transfer
J. Turbomach. April 2003, 125(2): 267–273.
doi: https://doi.org/10.1115/1.1554411
Topics:
Blades
,
Clearances (Engineering)
,
Flow (Dynamics)
,
Heat transfer
,
Mass transfer
,
Pressure
,
Suction
,
Cascades (Fluid dynamics)
,
Vortices
,
Chords (Trusses)
Heat Transfer Enhancement Using a Convex-Patterned Surface
J. Turbomach. April 2003, 125(2): 274–280.
doi: https://doi.org/10.1115/1.1556404
Unsteady and Calming Effects Investigation on a Very High-Lift LP Turbine Blade—Part I: Experimental Analysis
J. Turbomach. April 2003, 125(2): 281–290.
doi: https://doi.org/10.1115/1.1556013
Topics:
Blades
,
Boundary layers
,
Flow (Dynamics)
,
Heat flux
,
Heat transfer
,
Reynolds number
,
Separation (Technology)
,
Suction
,
Turbines
,
Turbulence
An Experimental and Computational Study of the Formation of a Streamwise Shed Vortex in a Turbine Stage
J. Turbomach. April 2003, 125(2): 291–297.
doi: https://doi.org/10.1115/1.1545766
Topics:
Nozzle guide vanes
,
Shear (Mechanics)
,
Turbines
,
Vortices
,
Yaw
,
Blades
,
Flow visualization
,
Flow (Dynamics)
,
Simulation
,
Stators
Turbine Blade Trailing Edge Flow Characteristics at High Subsonic Outlet Mach Number
J. Turbomach. April 2003, 125(2): 298–309.
doi: https://doi.org/10.1115/1.1539057
Topics:
Blades
,
Flow (Dynamics)
,
Mach number
,
Pressure
,
Suction
,
Boundary layers
,
Vortex shedding
,
Wakes
A Novel Two-Dimensional Viscous Inverse Design Method for Turbomachinery Blading
J. Turbomach. April 2003, 125(2): 310–316.
doi: https://doi.org/10.1115/1.1545765
Topics:
Blades
,
Design
,
Design methodology
,
Flow (Dynamics)
,
Outflow
,
Pressure
,
Nozzles
,
Turbomachinery
Improving the Aero-Thermal Characteristics of Turbomachinery Cascades
J. Turbomach. April 2003, 125(2): 317–327.
doi: https://doi.org/10.1115/1.1544510
Topics:
Blades
,
Cascades (Fluid dynamics)
,
Flow (Dynamics)
,
Optimization
,
Stress
,
Design
Stator-Rotor Interactions in a Transonic Compressor— Part 1: Effect of Blade-Row Spacing on Performance
Steven E. Gorrell, Mem. ASME,, Theodore H. Okiishi, Mem. ASME, Fellow ASME,, William W. Copenhaver, Mem. ASME, Fellow ASME,
J. Turbomach. April 2003, 125(2): 328–335.
doi: https://doi.org/10.1115/1.1540119
Topics:
Blades
,
Compressors
,
Flow (Dynamics)
,
Generators
,
Pressure
,
Rotors
,
Stators
,
Wakes
Stator-Rotor Interactions in a Transonic Compressor—Part 2: Description of a Loss-Producing Mechanism
Steven E. Gorrell, Mem. ASME, Theodore H. Okiishi, Fellow ASME, Mem. ASME, William W. Copenhaver, Fellow ASME, Mem. ASME
J. Turbomach. April 2003, 125(2): 336–345.
doi: https://doi.org/10.1115/1.1540120
Topics:
Blades
,
Flow (Dynamics)
,
Generators
,
Pressure
,
Rotors
,
Shock (Mechanics)
,
Simulation
,
Stators
,
Wakes
,
Waves
Aerodynamics of a Transonic Centrifugal Compressor Impeller
J. Turbomach. April 2003, 125(2): 346–351.
doi: https://doi.org/10.1115/1.1540117
Topics:
Aerodynamics
,
Blades
,
Compressors
,
Computational fluid dynamics
,
Flow (Dynamics)
,
Impellers
,
Leakage
,
Mach number
,
Shock waves
,
Vortices
Maximum Bladed Disk Forced Response From Distortion of a Structural Mode
J. Turbomach. April 2003, 125(2): 352–363.
doi: https://doi.org/10.1115/1.1540118
Analytical Formulation of Friction Interface Elements for Analysis of Nonlinear Multi-Harmonic Vibrations of Bladed Disks
J. Turbomach. April 2003, 125(2): 364–371.
doi: https://doi.org/10.1115/1.1539868
On the Three-Dimensional Finite Element Analysis of Dovetail Attachments
J. Turbomach. April 2003, 125(2): 372–379.
doi: https://doi.org/10.1115/1.1539867
Topics:
Finite element analysis
,
Stress
,
Boundary-value problems
,
Blades
,
Disks
,
Interpolation
CFD Optimization of Cooling Air Offtake Passages Within Rotor Cavities
J. Turbomach. April 2003, 125(2): 380–386.
doi: https://doi.org/10.1115/1.1556405
Topics:
Cavities
,
Computational fluid dynamics
,
Cooling
,
Flow (Dynamics)
,
Optimization
,
Rotors
,
Simulation
,
Pressure
,
Design
,
Compressors
Influence of Rub-Grooves on Labyrinth Seal Leakage
J. Turbomach. April 2003, 125(2): 387–393.
doi: https://doi.org/10.1115/1.1539516
Topics:
Clearances (Engineering)
,
Discharge coefficient
,
Flow (Dynamics)
,
Geometry
,
Leakage
,
Visualization
,
Stators
,
Water
,
Engines
,
Gas turbines
Computation of Flow Between Two Disks Rotating at Different Speeds
J. Turbomach. April 2003, 125(2): 394–400.
doi: https://doi.org/10.1115/1.1539515
Topics:
Disks
,
Flow (Dynamics)
,
Computation
,
Boundary layers
Email alerts
RSS Feeds
Aerothermal Performance of Slashface Leakage With Double Surface Angle Under Realistic Swirling Inflow
J. Turbomach (January 2025)
Characteristics of Deterministic and Stochastic Unsteadiness of Trailing Edge Cutback Film Cooling Flows
J. Turbomach (January 2025)