In a joint project between the Institute of Aircraft Propulsion Systems (ILA) and MTU Aero Engines, a two-stage low pressure turbine is tested at design and strong off-design conditions. The experimental data taken in the Altitude Test Facility (ATF) aims to study the effect of positive and negative incidence of the second stator vane. A detailed insight and understanding of the blade row interactions at these regimes is sought. Steady and time-resolved pressure measurements on the airfoil as well as inlet and outlet hot-film traverses at identical Reynolds number are performed for the midspan streamline. The results are compared with unsteady multistage computational fluid dynamics (CFD) predictions. Simulations agree well with the experimental data and allow detailed insights in the time-resolved flow-field. Airfoil pressure field responses are found to increase with positive incidence whereas at negative incidence the magnitude remains unchanged. Different pressure to suction side (SS) phasing is observed for the studied regimes. The assessment of unsteady blade forces reveals that changes in unsteady lift are minor compared to changes in axial force components. These increase with increasing positive incidence. The wake-interactions are predominating the blade responses in all regimes. For the positive incidence conditions, vane 1 passage vortex fluid is involved in the midspan passage interaction, leading to a more distorted three-dimensional (3D) flow field.
Skip Nav Destination
Article navigation
November 2014
Research-Article
Blade–Row Interactions in a Low Pressure Turbine at Design and Strong Off-Design Operation
Martin Lipfert,
Martin Lipfert
1
Institute of Aircraft Propulsion Systems,
e-mail: lipfert@ila.uni-stuttgart.de
Stuttgart University
,Pfaffenwaldring 6
,Stuttgart D-70569
, Germany
e-mail: lipfert@ila.uni-stuttgart.de
1Corresponding author.
Search for other works by this author on:
Jan Habermann,
Jan Habermann
Institute of Aircraft Propulsion Systems,
Stuttgart University
,Pfaffenwaldring 6
,Stuttgart D-70569
, Germany
Search for other works by this author on:
Martin G. Rose,
Martin G. Rose
Institute of Aircraft Propulsion Systems,
Stuttgart University
,Pfaffenwaldring 6
,Stuttgart D-70569
, Germany
Search for other works by this author on:
Stephan Staudacher,
Stephan Staudacher
Institute of Aircraft Propulsion Systems,
Stuttgart University
,Pfaffenwaldring 6
,Stuttgart D-70569
, Germany
Search for other works by this author on:
Yavuz Guendogdu
Yavuz Guendogdu
MTU Aero Engines
,Dachauer Strasse 665
,Munich D-80995
, Germany
Search for other works by this author on:
Martin Lipfert
Institute of Aircraft Propulsion Systems,
e-mail: lipfert@ila.uni-stuttgart.de
Stuttgart University
,Pfaffenwaldring 6
,Stuttgart D-70569
, Germany
e-mail: lipfert@ila.uni-stuttgart.de
Jan Habermann
Institute of Aircraft Propulsion Systems,
Stuttgart University
,Pfaffenwaldring 6
,Stuttgart D-70569
, Germany
Martin G. Rose
Institute of Aircraft Propulsion Systems,
Stuttgart University
,Pfaffenwaldring 6
,Stuttgart D-70569
, Germany
Stephan Staudacher
Institute of Aircraft Propulsion Systems,
Stuttgart University
,Pfaffenwaldring 6
,Stuttgart D-70569
, Germany
Yavuz Guendogdu
MTU Aero Engines
,Dachauer Strasse 665
,Munich D-80995
, Germany
1Corresponding author.
Contributed by the International Gas Turbine Institute (IGTI) of ASME for publication in the JOURNAL OF TURBOMACHINERY. Manuscript received June 30, 2014; final manuscript received July 10, 2014; published online August 26, 2014. Editor: Ronald Bunker.
J. Turbomach. Nov 2014, 136(11): 111002 (10 pages)
Published Online: August 26, 2014
Article history
Received:
June 30, 2014
Revision Received:
July 10, 2014
Citation
Lipfert, M., Habermann, J., Rose, M. G., Staudacher, S., and Guendogdu, Y. (August 26, 2014). "Blade–Row Interactions in a Low Pressure Turbine at Design and Strong Off-Design Operation." ASME. J. Turbomach. November 2014; 136(11): 111002. https://doi.org/10.1115/1.4028213
Download citation file:
Get Email Alerts
Cited By
Impacts of Material and Machine on the Variation of Additively Manufactured Cooling Channels
J. Turbomach (March 2025)
Scaling Heat Transfer and Pressure Losses of Novel Additively Manufactured Rib Designs
J. Turbomach (March 2025)
Related Articles
Investigation of Nonaxisymmetric Endwall Contouring and Three-Dimensional Airfoil Design in a 1.5 Stage Axial Turbine—Part II: Experimental Validation
J. Turbomach (August,2015)
Experimentally Verified Study of Regeneration-Induced Forced Response in Axial Turbines
J. Turbomach (March,2015)
A Study of Advanced High-Loaded Transonic Turbine Airfoils
J. Turbomach (October,2006)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Introduction
Turbine Aerodynamics: Axial-Flow and Radial-Flow Turbine Design and Analysis
Wind Turbine Airfoils and Rotor Wakes
Wind Turbine Technology: Fundamental Concepts in Wind Turbine Engineering, Second Edition