Skip Nav Destination
Issues
April 2010
ISSN 0742-4787
EISSN 1528-8897
Review Articles
Revisiting the Cattaneo–Mindlin Concept of Interfacial Slip in Tangentially Loaded Compliant Bodies
J. Tribol. April 2010, 132(2): 020801.
doi: https://doi.org/10.1115/1.4001238
Topics:
Ceramic matrix composites
,
Copper
,
Failure
,
Friction
,
Junctions
,
Shear stress
,
Stiction
,
Stress
,
Tangential loading
,
Annulus
Research Papers
Contact Mechanics
Transient Thermal Effects and Heat Partition in Sliding Contacts
J. Tribol. April 2010, 132(2): 021401.
doi: https://doi.org/10.1115/1.4000693
Topics:
Heat
,
Temperature
,
Transients (Dynamics)
Simulation of Fretting Wear in Half-Plane Geometries—Part II: Analysis of the Transient Wear Problem Using Quadratic Programming
J. Tribol. April 2010, 132(2): 021402.
doi: https://doi.org/10.1115/1.4000733
Topics:
Pressure
,
Quadratic programming
,
Wear
,
Cycles
,
Finite element analysis
,
Simulation
Partial Slip Contact Analysis on Three-Dimensional Elastic Layered Half Space
J. Tribol. April 2010, 132(2): 021403.
doi: https://doi.org/10.1115/1.4001011
Topics:
Coatings
,
Pressure
,
Shear (Mechanics)
,
Stress
,
Tangential loading
,
Contact mechanics
A Voronoi FE Fatigue Damage Model for Life Scatter in Rolling Contacts
J. Tribol. April 2010, 132(2): 021404.
doi: https://doi.org/10.1115/1.4001012
Topics:
Damage
,
Elastic moduli
,
Fatigue
,
Fatigue damage
,
Fatigue life
,
Gaussian distribution
,
Microcracks
,
Pressure
,
Rolling contact
,
Stress
Elastohydrodynamic Lubrication
A Numerical Study of Friction in Isothermal EHD Rolling-Sliding Sphere-Plane Contacts With Spinning
J. Tribol. April 2010, 132(2): 021501.
doi: https://doi.org/10.1115/1.4001104
Topics:
Film thickness
,
Friction
,
Pressure
,
Shear stress
,
Spin (Aerodynamics)
,
Spinning (Textile)
An Efficient Elastic Displacement Analysis Procedure for Simulating Transient Conformal-Contact Elastohydrodynamic Lubrication Systems
J. Tribol. April 2010, 132(2): 021502.
doi: https://doi.org/10.1115/1.4001120
Friction & Wear
Design and Performance of Slurry Erosion Tester
J. Tribol. April 2010, 132(2): 021601.
doi: https://doi.org/10.1115/1.4001449
Topics:
Erosion
,
Particulate matter
,
Slurries
Erosive Wear Model of Slurry Pump Impeller
J. Tribol. April 2010, 132(2): 021602.
doi: https://doi.org/10.1115/1.4001167
Topics:
Erosion
,
Flow (Dynamics)
,
Modeling
,
Particulate matter
,
Slurries
,
Wear
,
Pumps
,
Impellers
Wear Mode Comparison of High-Performance Inconel Alloys
J. Tribol. April 2010, 132(2): 021603.
doi: https://doi.org/10.1115/1.4001170
Hydrodynamic Lubrication
A Gas Lubrication Equation for High Knudsen Number Flows and Striated Rough Surfaces
J. Tribol. April 2010, 132(2): 021701.
doi: https://doi.org/10.1115/1.4001023
Topics:
Lubrication
,
Surface roughness
,
Knudsen number
,
Disks
,
Flow (Dynamics)
,
Bearings
,
Pressure
Elastohydrodynamics Applied to Active Tilting-Pad Journal Bearings
J. Tribol. April 2010, 132(2): 021702.
doi: https://doi.org/10.1115/1.4000721
Topics:
Bearings
,
Pressure
,
Rotors
,
Stress
,
Journal bearings
,
Stiffness
,
Flow (Dynamics)
,
Degrees of freedom
,
Damping
,
Lubrication
Influence of Wear on the Performance of Multirecess Hydrostatic Journal Bearing Operating With Micropolar Lubricant
J. Tribol. April 2010, 132(2): 021703.
doi: https://doi.org/10.1115/1.4000940
Topics:
Bearings
,
Flow (Dynamics)
,
Fluid films
,
Hydrostatics
,
Journal bearings
,
Lubricants
,
Wear
,
Stress
,
Damping
Thermohydrodynamic Analyses of Bump Air Foil Bearings With Detailed Thermal Model of Foil Structures and Rotor
J. Tribol. April 2010, 132(2): 021704.
doi: https://doi.org/10.1115/1.4001014
Topics:
Bearings
,
Cooling
,
Heat transfer
,
Rotors
,
Temperature
,
Foil bearings
,
Stress
,
Convection
A Lattice-Boltzmann Approach to Fluid Film Lubrication
J. Tribol. April 2010, 132(2): 021705.
doi: https://doi.org/10.1115/1.4000694
Analytical Model of Bump-Type Foil Bearings Using a Link-Spring Structure and a Finite-Element Shell Model
J. Tribol. April 2010, 132(2): 021706.
doi: https://doi.org/10.1115/1.4001169
Topics:
Bearings
,
Clearances (Engineering)
,
Deflection
,
Film thickness
,
Finite element analysis
,
Foil bearings
,
Friction
,
Springs
,
Stiffness
,
Stress
Magnetic Storage
The Critical Conditions for Tribo-Demagnetization of Perpendicular Magnetic Recording Disk Under Sliding Contact
J. Tribol. April 2010, 132(2): 021901.
doi: https://doi.org/10.1115/1.4000734
Topics:
Disks
,
Finite element analysis
,
Magnetic recording
,
Temperature
,
Stress
Experimental and FEA Scratch of Magnetic Storage Thin-Film Disks to Correlate Magnetic Signal Degradation With Permanent Deformation
J. Tribol. April 2010, 132(2): 021902.
doi: https://doi.org/10.1115/1.4000848
Topics:
Deformation
,
Disks
,
Finite element analysis
,
Stress
,
Thin films
,
Storage
Micro-Nano Tribology
A Scale Dependent Simulation of Liquid Lubricated Textured Surfaces
J. Tribol. April 2010, 132(2): 022001.
doi: https://doi.org/10.1115/1.4001105
Topics:
Boundary layers
,
Friction
,
Lubricants
,
Lubrication
,
Rupture
,
Shear (Mechanics)
,
Viscosity
,
Fluids
,
Stress
,
Geometry
Other (Seals, Manufacturing)
A Numerical Study of Labyrinth Seal Flutter
J. Tribol. April 2010, 132(2): 022201.
doi: https://doi.org/10.1115/1.3204774
Topics:
Cavities
,
Flow (Dynamics)
,
Flutter (Aerodynamics)
,
Pressure
,
Stability
,
Steady state
,
Damping
,
Aerodynamics
,
Finite element analysis
Experimental Study of the Performance of Static Seals Based on Measurements of Real Contact Area Using Thin Polycarbonate Films
J. Tribol. April 2010, 132(2): 022202.
doi: https://doi.org/10.1115/1.4000838
Topics:
Flanges
,
Gaskets
,
Leakage
,
Polymer films
,
Pressure
,
Copper
,
Sealing (Process)
,
Leakage flows
,
Laminar flow
,
Steel
Technical Briefs
Assessment of Elliptical Conformal Hertz Analysis Applied to Constant Velocity Joints
J. Tribol. April 2010, 132(2): 024501.
doi: https://doi.org/10.1115/1.4000735
Topics:
Finite element analysis
,
Pressure
,
Rollers
,
Stress
,
Dimensions
Flying Clearance Distribution With Thermal Flying Height Control in Hard Disk Drives
J. Tribol. April 2010, 132(2): 024502.
doi: https://doi.org/10.1115/1.4001024
Topics:
Clearances (Engineering)
,
Disks
,
Temperature
An Analytical Model for the Basic Design Calculations of Journal Bearings
J. Tribol. April 2010, 132(2): 024503.
doi: https://doi.org/10.1115/1.4000941
Topics:
Bearings
,
Design
,
Errors
,
Journal bearings
,
Lubricants
,
Stress
,
Temperature
Analytical Solution to the Hydrodynamic Lubrication of Fan-Shaped Thrust Step Bearings
J. Tribol. April 2010, 132(2): 024504.
doi: https://doi.org/10.1115/1.4001013
Topics:
Bearings
,
Flow (Dynamics)
,
Lubrication
,
Pressure
,
Stress
,
Thrust
A Simple Method to Calculate Contact Factor Used in Average Flow Model
J. Tribol. April 2010, 132(2): 024505.
doi: https://doi.org/10.1115/1.4001195
Topics:
Density
,
Film thickness
,
Fittings
,
Flow (Dynamics)
,
Probability
,
Surface roughness
,
Lubrication
Email alerts
RSS Feeds
Tribological Behavior of Annealed FeCoNiMn0.25Al0.25 High-Entropy Alloy
J. Tribol (November 2025)
Friction Reduction and Lubrication Performance of New Microemulsion Cutting Fluid for AISI 1045
J. Tribol (December 2025)
Friction and Wear Behaviors of HT200 Sliding Against QT600 Under Flame Ablation Environment
J. Tribol (December 2025)
