Skip Nav Destination
Issues
April 2007
ISSN 0742-4787
EISSN 1528-8897
In this Issue
Technical Papers
A Multiscale Method Modeling Surface Texture Effects
J. Tribol. April 2007, 129(2): 221–230.
doi: https://doi.org/10.1115/1.2540156
An Elastic Adhesion Model for Contacting Cylinder and Perfectly Wetted Plane in the Presence of Meniscus
J. Tribol. April 2007, 129(2): 231–234.
doi: https://doi.org/10.1115/1.2540212
Topics:
Adhesion
,
Adhesives
,
Approximation
,
Cylinders
,
Pressure
Modeling of the Rolling and Sliding Contact Between Two Asperities
J. Tribol. April 2007, 129(2): 235–245.
doi: https://doi.org/10.1115/1.2464137
Topics:
Algorithms
,
Deformation
,
Displacement
,
Hardening
,
Modeling
,
Pressure
,
Stress
,
Geometry
Experimental and Theoretical Investigation of Bouncing Vibrations of a Flying Head Slider in the Near-Contact Region
J. Tribol. April 2007, 129(2): 246–255.
doi: https://doi.org/10.1115/1.2464131
Topics:
Disks
,
Vibration
,
Lubricants
,
Pressure
EHL Modeling for Nonhomogeneous Materials: The Effect of Material Inclusions
J. Tribol. April 2007, 129(2): 256–273.
doi: https://doi.org/10.1115/1.2540234
Topics:
Discrete element methods
,
Film thickness
,
Pressure
,
Stress
A Generalized Formulation for the Contact Between Elastic Spheres: Applicability to Both Wet and Dry Conditions
J. Tribol. April 2007, 129(2): 274–282.
doi: https://doi.org/10.1115/1.2540041
Topics:
Adhesion
,
Bridges (Structures)
,
Equilibrium (Physics)
,
Pressure
,
Separation (Technology)
,
Liquid films
,
Capillarity
,
Elasticity
Evaluation of Stresses Around Inclusions in Hertzian Contacts Using the Discrete Element Method
J. Tribol. April 2007, 129(2): 283–291.
doi: https://doi.org/10.1115/1.2464132
Topics:
Springs
,
Stress
,
Elasticity
,
Elastic moduli
,
Discrete element methods
,
Equations of motion
Elastic–Plastic Multi-Asperity Contact Analysis of Cylinder-on-Flat Configuration
J. Tribol. April 2007, 129(2): 292–304.
doi: https://doi.org/10.1115/1.2540262
Topics:
Deformation
,
Friction
,
Stress
,
Finite element analysis
,
Cylinders
,
Surface roughness
An Incremental Adaptive Procedure for Viscoelastic Contact Problems
J. Tribol. April 2007, 129(2): 305–313.
doi: https://doi.org/10.1115/1.2464139
Assessment and Verification of a Novel Method for Near Surface Measurement of Mechanical Properties
J. Tribol. April 2007, 129(2): 314–320.
doi: https://doi.org/10.1115/1.2540550
A Multi-Scale System Analysis and Verification for Improved Contact Fatigue Life Cycle of a Cam-Roller System
J. Tribol. April 2007, 129(2): 321–325.
doi: https://doi.org/10.1115/1.2540572
Topics:
Cycles
,
Rollers
,
Surface roughness
,
Fatigue life
,
Coatings
,
Stress
,
Simulation
Lubrication and Wear of Artificial Knee Joint Materials in a Rolling∕Sliding Tribotester
J. Tribol. April 2007, 129(2): 326–335.
doi: https://doi.org/10.1115/1.2464130
Topics:
Lubrication
,
Wear
,
Knee joint prostheses
,
Polymers
,
Cycles
,
Wear testing
Entrainment and Inlet Suction: Two Mechanisms of Hydrodynamic Lubrication in Textured Bearings
J. Tribol. April 2007, 129(2): 336–347.
doi: https://doi.org/10.1115/1.2540089
Linear Stability Analysis of a Tilting-Pad Journal Bearing System
J. Tribol. April 2007, 129(2): 348–353.
doi: https://doi.org/10.1115/1.2464136
Topics:
Bearings
,
Eigenvalues
,
Journal bearings
,
Rotors
,
Stability
,
Newton's method
Parametric Studies on Static and Dynamic Performance of Air Foil Bearings with Different Top Foil Geometries and Bump Stiffness Distributions
J. Tribol. April 2007, 129(2): 354–364.
doi: https://doi.org/10.1115/1.2540065
Topics:
Bearings
,
Damping
,
Foil bearings
,
Stiffness
,
Stability
,
Stress
,
Rotors
,
Simulation
Rotordynamic Force Coefficients for a New Damper Seal Design
J. Tribol. April 2007, 129(2): 365–374.
doi: https://doi.org/10.1115/1.2464138
Topics:
Cavities
,
Dampers
,
Damping
,
Design
,
Pressure
,
Rotors
,
Stiffness
,
Bearings
,
Mechanical impedance
,
Excitation
Stability Characteristics of a Rigid Rotor Supported by a Gas-Lubricated Spiral-Groove Conical Bearing
J. Tribol. April 2007, 129(2): 375–383.
doi: https://doi.org/10.1115/1.2647443
Numerical Calculations of Pressure Distribution in the Bearing Clearance of Circular Aerostatic Thrust Bearings With a Single Air Supply Inlet
J. Tribol. April 2007, 129(2): 384–390.
doi: https://doi.org/10.1115/1.2464135
Topics:
Bearings
,
Clearances (Engineering)
,
Pressure
,
Thrust bearings
,
Flow (Dynamics)
,
Turbulence
Rotordynamics of Small Turbochargers Supported on Floating Ring Bearings—Highlights in Bearing Analysis and Experimental Validation
J. Tribol. April 2007, 129(2): 391–397.
doi: https://doi.org/10.1115/1.2464134
Topics:
Bearings
,
Compressors
,
Lubricants
,
Rotors
,
Temperature
,
Turbochargers
,
Rotordynamics
,
Pressure
,
Whirls
Influence of Groove Size on the Static and Rotordynamic Characteristics of Short, Laminar-Flow Annular Seals
J. Tribol. April 2007, 129(2): 398–406.
doi: https://doi.org/10.1115/1.2647471
Topics:
Clearances (Engineering)
,
Compressors
,
Damping
,
Flow (Dynamics)
,
Laminar flow
,
Leakage
,
Pressure
,
Stiffness
,
Stress
,
Stators
Stiffness and Efficiency Optimization of a Hydrostatic Laser Surface Textured Gas Seal
J. Tribol. April 2007, 129(2): 407–410.
doi: https://doi.org/10.1115/1.2540120
Topics:
Design
,
Hydrostatics
,
Lasers
,
Stiffness
,
Clearances (Engineering)
,
Leakage
,
Optimization
Residual Strain Measurements in Thermal Spray Cermet Coatings via Neutron Diffraction
J. Tribol. April 2007, 129(2): 411–418.
doi: https://doi.org/10.1115/1.2647503
Topics:
Coatings
,
Neutron diffraction
,
Sprays
,
Stress
,
Strain measurement
,
Coating processes
,
Fatigue
Elucidation of the Corrosion Mechanism of Vegetable-Oil-Based Lubricants
J. Tribol. April 2007, 129(2): 419–423.
doi: https://doi.org/10.1115/1.2464133
Topics:
Corrosion
,
Lubricants
,
Vegetable oils
,
Oils
,
Petroleum
Technical Briefs
Numerical Modeling of Rotordynamic Coefficients for Deliberately Roughened Stator Gas Annular Seals
J. Tribol. April 2007, 129(2): 424–429.
doi: https://doi.org/10.1115/1.2647531
Topics:
Compressors
,
Computational fluid dynamics
,
Rotors
,
Stators
,
Geometry
,
Damping
,
Stiffness
,
Computer simulation
Clarification of a Semi-Empirical Approach in Piston Ring-Cylinder Bore Conformability Prediction
J. Tribol. April 2007, 129(2): 430–435.
doi: https://doi.org/10.1115/1.2647800
Topics:
Cylinders
,
Piston rings
,
Pistons
,
Compressors
,
Tribology
On the CMP Material Removal at the Molecular Scale
J. Tribol. April 2007, 129(2): 436–437.
doi: https://doi.org/10.1115/1.2647829
Topics:
Chemistry
,
Particulate matter
,
Polishing
,
Semiconductor wafers
,
Slurries
,
Semiconductors (Materials)
Technology Review
A Review of Dry Particulate Lubrication: Powder and Granular Materials
J. Tribol. April 2007, 129(2): 438–449.
doi: https://doi.org/10.1115/1.2647859
Topics:
Flow (Dynamics)
,
Geometry
,
Granular materials
,
Lubricants
,
Lubrication
,
Particulate matter
,
Stress
,
Tribology
,
Constitutive equations
,
Computer simulation
Email alerts
RSS Feeds
Theoretical Development in the Viscosity of Ferrofluid
J. Tribol (May 2023)
Effects of Axial Clearance on Surface Initiated Flaking in Tapered Roller Bearings
J. Tribol (May 2023)