Abstract
Ploughshares during ploughing are worn as a result of friction with the soil. This process is accompanied by their heating. It was hypothesized that the amount of heat emitted in a given area of a ploughshare's surface is associated with the intensity of tribological processes. Using thermovision measurements, the temperature distribution on the rake face of ploughshares during use in soil was determined. It was found that the interaction of soil and ploughshares led to an increase in the temperature of their material. The landslide parts of the ploughshares were subjected to greater heating than the trapezoidal parts. On the working surface of the landslide parts, it was found that the greater heating area corresponded to a larger loss of thickness.
Issue Section:
Friction and Wear
Keywords:
ploughshare,
abrasive wear,
thermovision,
field tests,
abrasion,
contact area,
metalworking,
wear
References
1.
Klamecki
, B. E.
, 1980
, “A Thermodynamic Model of Friction
,” Wear
, 63
(1
), pp. 113
–120
. 2.
Sadowski
, J.
, 2003
, The Thermodynamic Theory of Friction and Wear
, Wydawnictwo Politechniki Radomskiej
, Radom
.3.
Chen
, Q.
, and Li
, D. Y.
, 2005
, “A Computational Study of Frictional Heating and Energy Conversion During Sliding Processes
,” Wear
, 259
(7–12
), pp. 1382
–1391
. 4.
Klamecki
, B. E.
, 1980
, “Wear—An Entropy Production Model
,” Wear
, 58
(2
), pp. 325
–330
. 5.
Klamecki
, B. E.
, 1984
, “An Entropy-Based Model of Plastic Deformation Energy Dissipation in Sliding
,” Wear
, 96
(3
), pp. 319
–329
. 6.
Doelling
, K. L.
, Ling
, F. F.
, Bryant
, M. D.
, and Heilman
, B. P.
, 2000
, “An Experimental Study of the Correlation Between Wear and Entropy Flow in Machinery Components
,” J. Appl. Phys.
, 88
(5
), pp. 2999
–3003
. 7.
Dai
, Z.
, Yang
, S.
, and Xue
, Q.
, 2000
, “Thermodynamic Model of Fretting Wear
,” J. Nanjing Univ. Aeronaut. Astronaut.
, 32
, pp. 125
–131
.8.
Bryant
, M. D.
, 2009
, “Entropy and Dissipative Processes of Friction and Wear
,” FME Trans.
, 37
(2
), pp. 55
–60
.9.
Kozyrev
, P.
, Yu
, B.
, and Sedakova
, E.
, 2008
, “Application of a Thermodynamic Model for Analysis of Wear Resistance of Materials
,” J. Mach. Manuf. Reliab.
, 37
(1
), pp. 60
–62
.10.
Abdel-Aal
, H. A.
, 2005
, “On the Role of Intrinsic Material Response in Failure of Tribo Systems
,” Wear
, 259
(7–12
), pp. 1372
–1381
. 11.
Bryant
, M.
, Khonsari
, M.
, and Ling
, F.
, 2008
, “On the Thermodynamics of Degradation
,” Proc. R. Soc. A Math. Phys. Eng. Sci.
, 464
(2096
), pp. 2001
–2014
.12.
Shakhvorostov
, D.
, Pöhlmann
, K.
, and Scherge
, M.
, 2004
, “An Energetic Approach to Friction, Wear and Temperature
,” Wear
, 257
(1–2
), pp. 124
–130
. 13.
Uetz
, H.
, and Föhl
, J.
, 1978
, “Wear as an Energy Transformation Process
,” Wear
, 49
(2
), pp. 253
–264
. 14.
Abdel-Aal
, H. A.
, 2003
, “On the Interdependence Between Kinetics of Friction-Released Thermal Energy and the Transition in Wear Mechanisms During Sliding of Metallic Pairs
,” Wear
, 254
(9
), pp. 884
–900
. 15.
Tian
, X.
, and Kennedy
, F. E.
, 1993
, “Contact Surface Temperature Models for Finite Bodies in Dry and Boundary Lubricated Sliding
,” ASME J. Tribol.
, 115
(3
), pp. 411
–418
. 16.
Amiri
, M.
, Khonsari
, M. M.
, and Brahmeshwarkar
, S.
, 2010
, “On the Relationship Between Wear and Thermal Response in Sliding Systems
,” Tribol. Lett.
, 38
(2
), pp. 147
–154
. 17.
Hou
, Z. B.
, and Komanduri
, R.
, 2000
, “General Solutions for Stationary/Moving Plane Heat Source Problems in Manufacturing and Tribology
,” Int. J. Heat Mass Transfer
, 43
(10
), pp. 1679
–1698
. 18.
Komanduri
, R.
, and Hou
, Z. B.
, 2001
, “Analysis of Heat Partition and Temperature Distribution in Sliding Systems
,” Wear
, 251
(1–12
), pp. 925
–938
. 19.
Smith
, E. H.
, and Arnell
, R. D.
, 2013
, “A New Approach to the Calculation of Flash Temperatures in Dry, Sliding Contacts
,” Tribol. Lett.
, 52
(3
), pp. 407
–414
. 20.
Smith
, E. H.
, and Arnell
, R. D.
, 2014
, “The Prediction of Frictional Temperature Increases in Dry, Sliding Contacts Between Different Materials
,” Tribol. Lett.
, 55
(2
), pp. 315
–328
. 21.
Wang
, Y.
, Lei
, T.
, Gao
, M.
, and Yan
, C.
, 1992
, “Frictional Temperature Field and Its Relationship to the Transition of Wear Mechanisms of Steel 52100
,” J. Phys. D. Appl. Phys.
, 25
(1A
), pp. A165–A169.22.
Szolwinski
, M. P.
, Harish
, G.
, Farris
, T. N.
, and Sakagami
, T.
, 1999
, “In-Situ Measurement of Near-Surface Fretting Contact Temperatures in an Aluminum Alloy
,” ASME J. Tribol.
, 121
(1
), pp. 11
–19
. 23.
Kostencki
, P.
, Borowiak
, P.
, and Nowowiejski
, R.
, 2012
, “Statyczny i dynamiczny nacisk wywierany przez glebę pylastą na powierzchnię roboczą lemiesza płużnego
,” Tribology
, 246
(6
), pp. 61
–73
.24.
Kostencki
, P.
, Stawicki
, T.
, Królicka
, A.
, and Sędłak
, P.
, 2019
, “Wear of Cultivator Coulters Reinforced With Cemented-Carbide Plates and Hardfacing
,” Wear
, 438–439
, p. 203063
. 25.
Stawicki
, T.
, Kostencki
, P.
, and Białobrzeska
, B.
, 2018
, “Roughness of Ploughshare Working Surface and Mechanisms of Wear During Operation in Various Soils
,” Metals
, 8
(12
), p. 1042
. 26.
Kalácska
, Á
, De Baets
, P.
, Fauconnier
, D.
, Schramm
, F.
, Frerichs
, L.
, and Sukumaran
, J.
, 2020
, “Abrasive Wear Behaviour of 27MnB5 Steel Used in Agricultural Tines
,” Wear
, 442–443
, p. 203107
. 27.
Kostencki
, P.
, Stawicki
, T.
, and Królicka
, A.
, 2021
, “The Evaluation of the Effectiveness of Reinforcement by Cemented-Carbide Plates in Two Design Variants of the Chisels Intended for Cultivation–Sowing Aggregates
,” Materials
, 14
(4
), p. 1020
. 28.
Piazzetta
, G. R.
, Lagoeiro
, L. E.
, Figueira
, I. F. R.
, Rabelo
, M. A. G.
, and Pintaude
, G.
, 2018
, “Identification of Abrasion Regimes Based on Mechanisms of Wear on the Steel Stylus Used in the Cerchar Abrasiveness Test
,” Wear
, 410–411
, pp. 181
–189
. 29.
Ostrowska
, A.
, Gawliński
, S.
, and Szczubiałka
, Z.
, 1991
, Methods of Analysis and Assessment of Soil and Plant Properties. Catalog
, Instytut Ochrony Środowiska
, Warsaw
.30.
Mocek
, A.
, Drzymała
, S.
, and Maszner
, P.
, 1997
, Soil Genesis, Analysis and Classification
, Wyd. Akad. Roln.
, Poznan
.31.
Baranski
, M.
, and Polak
, A.
, 2010
, “Thermographic Diagnostic of
Electrical Machines
,” The XIX International Conference on Electrical Machines—ICEM 2010
, Rome, Italy
, September
, pp. 1
–3
.32.
Thorsen
, O. V.
, and Dalva
, M.
, 1999
, “Failure Identification and Analysis for High-Voltage Induction Motors in the Petrochemical Industry
,” IEEE Trans. Ind. Appl.
, 35
(4
), pp. 810
–818
. 33.
Malhotra
, V. M.
, and Carino
, N. J.
, 2004
, Handbook on Nondestructive Testing of Concrete
, 2nd ed., CRC Press, Taylor & Francis Group
, Boca Raton, FL
.34.
Natsis
, A.
, Papadakis
, G.
, and Pitsilis
, J.
, 1999
, “The Influence of Soil Type, Soil Water and Share Sharpness of a Mouldboard Plough on Energy Consumption, Rate of Work and Tillage Quality
,” J. Agric. Eng. Res.
, 72
(2
), pp. 171
–176
. Copyright © 2022 by ASME
You do not currently have access to this content.
