This study focuses on the thermohydrodynamic lubrication (THD) analysis of fluid film bearings with steps on the bearing surface, such as Rayleigh step. In general, the Reynolds equation does not satisfy the continuity of fluid velocity components at steps. This discontinuity results in the difficulty to solve the energy equation for the lubricants by finite differential method (FDM), because the energy equation needs the velocity components explicitly. The authors have solved this issue by introducing the equivalent clearance height and the equivalent gradient of the clearance height at steps. These parameters remove the discontinuity of velocity components, and the Reynolds equations can be solved for any bearing surfaces with step regions by FDM. Moreover, this method results in pseudocontinuous velocity components, which enables the energy equation to be solved as well. This paper describes this method with one-dimensional and equal grids model. The numerical results of pressure and temperature distributions by the proposed method for an infinite width Rayleigh step bearing agree well with the results obtained by solving full Navier–Stokes equations with semi-implicit method for pressure-linked equations revised (SIMPLER) method.
Equivalent Clearance Model for Solving Thermohydrodynamic Lubrication of Slider Bearings With Steps
Contributed by the Tribology Division of ASME for publication in the JOURNAL OF TRIBOLOGY. Manuscript received March 31, 2016; final manuscript received August 11, 2016; published online November 30, 2016. Assoc. Editor: Jordan Liu.
- Views Icon Views
- Share Icon Share
- Search Site
Ogata, H., and Sugimura, J. (November 30, 2016). "Equivalent Clearance Model for Solving Thermohydrodynamic Lubrication of Slider Bearings With Steps." ASME. J. Tribol. May 2017; 139(3): 034503. https://doi.org/10.1115/1.4034457
Download citation file: