Shear-dependent viscosities have been measured over a range of temperature and pressure for seven engine oils blended to have kinematic viscosity of 14 mm2/s at 100 °C with two base oils and four viscosity modifiers. Elevated pressure measurements were performed with a pressurized thin-film Couette viscometer and ambient pressure measurements were done with a PCS USV viscometer. These measurements were fitted to a generalized Newtonian model with the effective shear modulus specified by an empirical power-law shifting rule. The use of PAO-40 as a thickener delayed the shear-thinning to very high stress as compared with the polymers. The rate sensitivity of the oils thickened with nondispersant polymers was similar. Like the Tannas TBS viscometer, the PCS Instruments USV viscometer provides shear-dependent viscosity measurements, which can be essential for the most accurate time-temperature-pressure shifting. Viscosities measured at high viscous power in the ambient pressure viscometer, however, tend to be influenced by thermal softening and at high stress by shear cavitation.
Time-Temperature-Pressure Superposition in Polymer Thickened Liquid Lubricants
Contributed by the Tribology Division of ASME for publication in the JOURNAL OF TRIBOLOGY. Manuscript received August 30, 2013; final manuscript received January 22, 2014; published online February 19, 2014. Assoc. Editor: Dong Zhu.
- Views Icon Views
- Share Icon Share
- Search Site
Bair, S., and Qureshi, F. (February 19, 2014). "Time-Temperature-Pressure Superposition in Polymer Thickened Liquid Lubricants." ASME. J. Tribol. April 2014; 136(2): 021505. https://doi.org/10.1115/1.4026591
Download citation file: