The microstructure of a ferrito-pearlitic ductile cast iron has been modified by CO2 laser surface hardening. Analysis of the laser-processed surfaces showed a dramatic increase in microhardness. Dry sliding wear of laser-treated specimens against an alumina counterbody has been investigated by “ball-on-disk” testing. The evolution of the wear coefficient, as well as metallographic observations, revealed an oxidational wear mechanism. The wear resistance of the laser-treated samples was significantly enhanced. The laser-treated cast iron has a better resistance to abrasion and plastic deformation. The improvement of the wear resistance was due to the fine and homogeneous microstructure produced after laser-treatment. Wear plots showing the evolution of wear coefficient with normal load, sliding velocity, and humidity have been established. The wear of the laser-treated cast iron is not influenced by the variation of operating conditions (normal load, sliding velocity, and relative humidity).

Issue Section:
Research Papers
Topics:
Carbon dioxide lasers, Nodular iron, Surface hardening, Wear, Lasers, Cast iron, Stress, Wear resistance, Abrasion, Deformation, Disks, Microhardness, Testing
1.
Chen
C. H.
,
Altstetter
C. J.
, and
Rigsbee
J. M.
,
1984
, “
Laser Processing of Cast Iron for Enhanced Erosion Resistance
,”
Metallurgical Trans. A
, Vol.
15
, pp.
719
–
728
.
2.
Chen
C. H.
,
Ju
C. P.
, and
Rigsbee
J. M.
,
1988
, “
Laser Surface Modification of Ductile Iron
,”
Materials Science and Techn.
, Vol.
4
, pp.
161
–
172
.
3.
Gadag
S. P.
, and
Srinivasan
M. N.
,
1994
, “
Dry Sliding Wear and Friction: Laser-Treated Ductile Iron
,”
Wear
, Vol.
173
, pp.
21
–
29
.
4.
Guan, Y., Montagnon, J-P, Pantelis, D., Poupeau Ph., and Franc¸ois, D., 1990, “Traitements Superficiel d’une Fonte G.S. Perlitique Par Laser de Puissance,” Me´moires et e´tudes scientifiques de la Revue de Me´tallurgie, Janvier, pp. 21–31.
5.
Leech
P. W.
,
1986
, “
Comparison of the Sliding Wear Process of Various Cast Irons in the Laser-Surface-Melted and As-Cast Forms
,”
Wear
, Vol.
113
, pp.
233
–
245
.
6.
Papaphilippou, C, 1994, “Etude Tribologique d’une Fonte a` Graphite Spheroi¨dal Avant et Apre`s Trempe Laser. Application a` la De´finition du Traitement Laser Par Points,” Ph.D. thesis, E.N.S.M.P., Paris, France.
7.
Papaphilippou
C.
,
Vardavoulias
M.
, and
Jeandin
M.
,
1994
, “
The Influence of Humidity and the Role of Debris in the Unlubricated Wear of Ductile Cast Iron Against Alumina
,”
Wear
, Vol.
177
, pp.
151
–
157
.
8.
Papaphilippou, C., and Jeandin, M., 1995, “Spot Laser Hardening,” (submitted for publication to the Journal of Material Science Letters).
This content is only available via PDF.
Copyright © 1996
 by The American Society of Mechanical Engineers
You do not currently have access to this content.