In this study, a 1D analysis has been presented for the prediction of ejector performance at critical mode operation. The new triple-choking model has been developed using the governing equations of the compressible fluids and thermodynamics properties based on the frictional adiabatic fluid study. A new approach has been introduced to consider the frictional effects on the mixing efficiencies by extending the 1D ejector theory. A very good agreement has been reported for the R141b and steam experimental data at critical mode operation. Furthermore, simulated results have been compared with some of the recent theoretical models. In addition, the influence of operation conditions on the ejector performance and the required cross-sectional area of the mixing chamber has been showed. Finally, the influence of the operation conditions (such as generator, condenser, and evaporator temperatures) and the size of ejector on the mixing efficiency have been studied.
Skip Nav Destination
e-mail: sargolzaei@um.ac.ir
e-mail: mr_pj_7@yahoo.com
e-mail: saljoughi@gmail.com
Article navigation
June 2010
Research Papers
Triple-Choking Model for Ejector
J. Sargolzaei,
J. Sargolzaei
Department of Chemical Engineering,
e-mail: sargolzaei@um.ac.ir
Ferdowsi University of Mashhad
, P.O. Box 9177948944, Mashhad, Iran
Search for other works by this author on:
M. R. Pirzadi Jahromi,
M. R. Pirzadi Jahromi
Department of Chemical Engineering,
e-mail: mr_pj_7@yahoo.com
Ferdowsi University of Mashhad
, P.O. Box 9177948944, Mashhad, Iran
Search for other works by this author on:
E. Saljoughi
E. Saljoughi
Department of Chemical Engineering,
e-mail: saljoughi@gmail.com
Ferdowsi University of Mashhad
, P.O. Box 9177948944, Mashhad, Iran
Search for other works by this author on:
J. Sargolzaei
Department of Chemical Engineering,
Ferdowsi University of Mashhad
, P.O. Box 9177948944, Mashhad, Irane-mail: sargolzaei@um.ac.ir
M. R. Pirzadi Jahromi
Department of Chemical Engineering,
Ferdowsi University of Mashhad
, P.O. Box 9177948944, Mashhad, Irane-mail: mr_pj_7@yahoo.com
E. Saljoughi
Department of Chemical Engineering,
Ferdowsi University of Mashhad
, P.O. Box 9177948944, Mashhad, Irane-mail: saljoughi@gmail.com
J. Thermal Sci. Eng. Appl. Jun 2010, 2(2): 021009 (10 pages)
Published Online: November 8, 2010
Article history
Received:
May 3, 2010
Revised:
October 3, 2010
Online:
November 8, 2010
Published:
November 8, 2010
Citation
Sargolzaei, J., Pirzadi Jahromi, M. R., and Saljoughi, E. (November 8, 2010). "Triple-Choking Model for Ejector." ASME. J. Thermal Sci. Eng. Appl. June 2010; 2(2): 021009. https://doi.org/10.1115/1.4002752
Download citation file:
Get Email Alerts
Cited By
Enhancing the performance of a rooftop solar chimney through flow disturbers
J. Thermal Sci. Eng. Appl
Incremental Learning Strategy-Assisted Multi-Objective Optimization for an Oil–Water Mixed Cooling Motor
J. Thermal Sci. Eng. Appl (December 2023)
Design and Optimization of a New Heterogeneous Printed Circuit Plate Heat Exchanger With Molten Salt Zigzag Passage and Supercritical CO2 Airfoil Fin Passage
J. Thermal Sci. Eng. Appl (December 2023)
Related Articles
An Experimental Investigation of Steam Ejector Refrigeration Systems
J. Thermal Sci. Eng. Appl (September,2012)
Effect of Operational Parameters on a Novel Combined Cycle of Ejector Refrigeration Cycle and Kalina Cycle
J. Energy Resour. Technol (January,2020)
Investigation of a Combined Refrigeration and Air Conditioning System Based on Two-Phase Ejector Driven by Exhaust Gases of Natural Gas Fueled Homogeneous Charge Compression Ignition Engine
J. Energy Resour. Technol (December,2021)
Energy and Exergy Analyses of a New Triple-Staged Refrigeration Cycle
Using Solar Heat Source
J. Sol. Energy Eng (February,2014)
Related Proceedings Papers
Related Chapters
Outlook
Closed-Cycle Gas Turbines: Operating Experience and Future Potential
Combined Cycle Power Plant
Energy and Power Generation Handbook: Established and Emerging Technologies
In-Nozzle Cavitation-Induced Orifice-to-Orifice Variations Using Real Injector Geometry and Gasoline-Like Fuels
Proceedings of the 10th International Symposium on Cavitation (CAV2018)