Current multi-pane windows have a very low heat loss but their solar transmittance is low resulting in a loss of daylight and solar gains. Multi-pane windows also require framing arrangements that are difficult to retrofit to existing apertures in many existing buildings. A contiguously sealed evacuated double-glazing with low long-wave radiative emittance coatings on its internal surfaces, no heavier than conventional double-glazing, with good visual transmittance suitable for retrofitting to existing buildings, has been analyzed experimentally. Measured heat transfer coefficients and visual transmittances of laboratory fabricated evacuated glazing samples, along with theoretical predictions of center of glazing thermal conductance are presented.
Skip Nav Destination
e-mail: p.griffiths@ulster.ac.uk
Article navigation
Research Papers
Experimental Characterization and Detailed Performance Prediction of a Vacuum Glazing System Fabricated With a Low Temperature Metal Edge Seal, Using a Validated Computer Model
Philip W. Griffiths,
Philip W. Griffiths
Centre for Sustainable Technologies,
e-mail: p.griffiths@ulster.ac.uk
University of Ulster
, Newtownabbey, Northern Ireland BT37 0QB
Search for other works by this author on:
Philip C. Eames,
Philip C. Eames
Centre for Sustainable Technologies,
University of Ulster
, Newtownabbey, Northern Ireland BT37 0QB
Search for other works by this author on:
Trevor J. Hyde,
Trevor J. Hyde
Centre for Sustainable Technologies,
University of Ulster
, Newtownabbey, Northern Ireland BT37 0QB
Search for other works by this author on:
Yueping Fang,
Yueping Fang
Centre for Sustainable Technologies,
University of Ulster
, Newtownabbey, Northern Ireland BT37 0QB
Search for other works by this author on:
Brian Norton
Brian Norton
Dublin Institute of Technology
, Dublin, Republic of Ireland
Search for other works by this author on:
Philip W. Griffiths
Centre for Sustainable Technologies,
University of Ulster
, Newtownabbey, Northern Ireland BT37 0QBe-mail: p.griffiths@ulster.ac.uk
Philip C. Eames
Centre for Sustainable Technologies,
University of Ulster
, Newtownabbey, Northern Ireland BT37 0QB
Trevor J. Hyde
Centre for Sustainable Technologies,
University of Ulster
, Newtownabbey, Northern Ireland BT37 0QB
Yueping Fang
Centre for Sustainable Technologies,
University of Ulster
, Newtownabbey, Northern Ireland BT37 0QB
Brian Norton
Dublin Institute of Technology
, Dublin, Republic of IrelandJ. Sol. Energy Eng. May 2006, 128(2): 199-203 (5 pages)
Published Online: November 10, 2005
Article history
Received:
May 13, 2004
Revised:
November 10, 2005
Citation
Griffiths, P. W., Eames, P. C., Hyde, T. J., Fang, Y., and Norton, B. (November 10, 2005). "Experimental Characterization and Detailed Performance Prediction of a Vacuum Glazing System Fabricated With a Low Temperature Metal Edge Seal, Using a Validated Computer Model." ASME. J. Sol. Energy Eng. May 2006; 128(2): 199–203. https://doi.org/10.1115/1.2188529
Download citation file:
Get Email Alerts
Solar Simulator Prototype With Halogen and Light-Emitting Diode Sources
J. Sol. Energy Eng (August 2025)
Experimental Study of a Cooling Photovoltaic Solar Panel Using Water-Wet Jute Fabric
J. Sol. Energy Eng (August 2025)
2024 Associate Editors Recognition
J. Sol. Energy Eng
2024 Reviewer's Recognition
J. Sol. Energy Eng
Related Articles
Enrichment of solar heat exchanger thermal performance by the integration of beeswax and hybrid nanofluid (ZnO/MgO)
J. Thermal Sci. Eng. Appl (January,0001)
Analysis and Design of Two Stretched-Membrane Parabolic Dish Concentrators
J. Sol. Energy Eng (August,1991)
Characteristics of Hollow Glass Microspheres as an Insulating Material and an Opacifier
J. Heat Transfer (May,1976)
Performance Comparison and Model Validation of a Conical Solar Reflector and a Linear Fresnel Concentrator
J. Sol. Energy Eng (December,2016)
Related Proceedings Papers
Related Chapters
A Nonsteady-State Thermal-Conductivity Tester for Cryogenic Insulations
Thermal Conductivity Measurements of Insulating Materials at Cryogenic Temperatures
An Apparatus for Thermal Conductivity at Cryogenic Temperatures Using a Heat Flow Meter
Thermal Conductivity Measurements of Insulating Materials at Cryogenic Temperatures
Cryogenic Thermal-Conductivity Measurements of Insulating Materials
Thermal Conductivity Measurements of Insulating Materials at Cryogenic Temperatures