As part of the U.S. Department of Energy’s Wind Partnerships for Advanced Component Technologies program, Global Energy Concepts LLC (GEC) is performing a study concerning blades for wind turbines in the multi-megawatt range. Earlier in this project constraints to cost-effective scaling-up of the current commercial blade designs and manufacturing methods were identified, and candidate innovations in composite materials, manufacturing processes and structural configurations were assessed. In the present work, preliminary structural designs are developed for hybrid carbon fiber/fiberglass blades at system ratings of 3.0 and 5.0 MW. Structural performance is evaluated for various arrangements of the carbon blade spar, and critical performance aspects of the carbon material and blade structure are discussed. Recommendations are made for new testing of composite coupons and blade sub-structure to address the technical uncertainties identified in this work.

Issue Section:
Technical Papers
Keywords:
wind turbines, composite materials, carbon fibre reinforced composites, materials testing
Topics:
Blades, Carbon, Design, Spar platforms, Wing spars, Manufacturing, Testing, Composite materials, Glass reinforced plastics, Wind turbines, Carbon fibers
1.
BTM Consult ApS., 2001, A Towering Performance−Latest BTM Report on the Wind Industry, Renewable Energy World, July-August 2001, p.p. 69–87, James & James (Science Publishers Ltd.), London, U.K.
2.
Dutton, A.G., et al., 1999, Design Concepts for Sectional Wind Turbine Blades, Proceedings of the 1999 European Wind Energy Conference, Nice, France. pp. 285–288.
3.
Joosse, P.A., et al., 2000, Economic Use of Carbon Fibres in Large Wind Turbine Blades, Proceedings of AIAA/ASME Wind Energy Symposium, Reno, NV.
4.
Joosse, P.A., et al., (July 2–6, 2001). Toward Cost Effective Large Turbine Components with Carbon Fibers. Presented at the 2001 European Wind Energy Conference and Exhibition, Copenhagen, Denmark.
5.
Joosse, P.A., et al., (July 2–6, 2001). Fatigue Properties of Low-Cost Carbon Fiber Material. Presented at the 2001 European Wind Energy Conference and Exhibition, Copenhagen, Denmark.
6.
Joosse, P.A., et al., 2002, Toward Cost Effective Large Turbine Components with Carbon Fibers. Proceedings of AIAA/ASME Wind Energy Symposium. Reno, NV.
7.
Griffin, D.A. 2001, WindPACT Turbine Design Scaling Studies Technical Area 1-Composite Blades for 80- to 120-Meter Rotor. NREL/SR-500-29492. Golden, CO: National Renewable Energy Laboratory.
8.
Smith, K., 2001, WindPACT Turbine Design Scaling Studies Technical Area 2-Turbine, Rotor and Blade Logistics. NREL/SR-500-29439. Golden, CO: National Renewable Energy Laboratory.
9.
Vandenbosche, J., 2001, WindPACT Turbine Design Scaling Studies Technical Area 3-Self-Erecting Tower Structures. NREL/SR-500-29493. Golden, CO: National Renewable Energy Laboratory.
10.
Malcolm, D., Hansen, C., 2001, Results from the WindPACT Rotor Design Study. Proceedings Windpower 2001, American Wind Energy Association, Washington, DC.
11.
Malcolm, D.J. and Hansen, A.C., 2002, Lessons from the WindPACT Rotor Design Study. Poster presentation at WindPower2002. American Wind Energy Association, Portland, OR.
12.
Griffin, D.A., 2002, Blade System Design Studies Volume I: Composite Technologies for Large Wind Turbine Blades. SAND2002-1879. Albuquerque, NM: Sandia National Laboratories.
13.
Laird, D.L., 2001, 2001: A Numerical Manufacturing and Design Tool Odyssey. Proceedings of AIAA/ASME Wind Energy Symposium. Reno, NV.
14.
Mandell, J.F., Samborsky, D.D., and Wang, L., 2003, New Fatigue Data for Wind Turbine Blade Materials. Proceedings of AIAA/ASME Wind Energy Symposium. Reno, NV.
15.
Service, D., 2001, PAN Carbon Fibre Precursor. Proceedings of Intertech’s Carbon Fiber 2001, Bordeaux, France.
16.
International Electrotechnical Commission, 1999, IEC 61400-1: Wind Turbine Generator Systems-Part 1: Safety Requirements, 2nd edition. International Standard 1400-1.
17.
Germanischer, Lloyd, 1999, Rules and Regulations IV-Non-Marine Technology, Part 1-Wind Energy, Regulation for the Certification of Wind Energy Conversion Systems.
18.
Mandell, J.F., Samborsky, D.D., 1997, DOE/MSU Composite Material Fatigue Database: Test Methods, Materials and Analysis. SAND97-3002. Sandia National Laboratories. Albuquerque, NM.
19.
Griffin, D.A., 2003, (draft), Blade System Design Studies Volume II: Preliminary Blade Designs and Recommended Test Matrix, (in Publication), Albuquerque, NM: Sandia National Laboratories.
Copyright © 2003
 by ASME
You do not currently have access to this content.