Search Results | J. Pressure Vessel Technol.

1-19 of 19

Sort by

Sort Order Select

Journal Articles

Validation of Monte Carlo Simulation Technique for Calibration of Cleavage Fracture Model Parameters, With the Calibrated Values From Experimental Results for Reactor Pressure Vessel Material 20MnMoNi55 Steel in the Lower Self of Ductile-to-Brittle Transition Region

K. Bhattacharyya, S. K. Acharyya

J. Pressure Vessel Technol. December 2021, 143(6): 061503.

Paper No: PVT-20-1106

DOI: https://doi.org/10.1115/1.4051021

Published Online: May 31, 2021

View Article titled, Validation of Monte Carlo Simulation Technique for Calibration of Cleavage Fracture Model Parameters, With the Calibrated Values From Experimental Results for Reactor Pressure Vessel Material 20MnMoNi55 Steel in the Lower Self of Ductile-to-Brittle Transition Region

Topics: Brittleness, Calibration, Fracture (Materials), Fracture (Process), Simulation, Steel, Stress, Temperature, Reactor vessels, Fracture toughness

Journal Articles

Technical Basis Part 2 for Code Case N-889: Reference Stress Corrosion Crack Growth Rate Curves for Irradiated Austenitic Stainless Steels in Light Water Reactor Environments

Ernest D. Eason, Raj Pathania, Anders Jenssen, Dennis P. Weakland

J. Pressure Vessel Technol. April 2021, 143(2): 021202.

Paper No: PVT-19-1261

DOI: https://doi.org/10.1115/1.4047878

Published Online: September 15, 2020

View Article titled, Technical Basis Part 2 for Code Case N-889: Reference Stress Corrosion Crack Growth Rate Curves for Irradiated Austenitic Stainless Steels in Light Water Reactor Environments

Topics: Calibration, Fracture (Materials), Heat, Inspection, Irradiation (Radiation exposure), Light water reactors, Pressurized water reactors, Stainless steel, Stress corrosion cracking, Yield stress

Journal Articles

Technical Basis Part 1 for Code Case N-889: Data Selection and Modeling of Stress Corrosion Crack Growth Rates for Irradiated Austenitic Stainless Steels in Light Water Reactor Environments

Ernest D. Eason, Raj Pathania, Anders Jenssen

J. Pressure Vessel Technol. April 2021, 143(2): 021201.

Paper No: PVT-19-1260

DOI: https://doi.org/10.1115/1.4047879

Published Online: September 15, 2020

View Article titled, Technical Basis Part 1 for Code Case N-889: Data Selection and Modeling of Stress Corrosion Crack Growth Rates for Irradiated Austenitic Stainless Steels in Light Water Reactor Environments

Topics: Calibration, Heat, Modeling, Stainless steel, Stress corrosion cracking, Fracture (Materials), Yield stress, Irradiation (Radiation exposure), Light water reactors, Fittings

Journal Articles

Experimental Evaluation of Novel Hybrid Microwave/Ultrasonic Technique to Locate and Characterize Pipe Wall Thinning

Wissam M. Alobaidi, Clifford E. Kintner, Entidhar A. Alkuam, Kota Sasaki, Noritaka Yusa, Hidetoshi Hashizume, Eric Sandgren

J. Pressure Vessel Technol. February 2018, 140(1): 011501.

Paper No: PVT-17-1084

DOI: https://doi.org/10.1115/1.4038517

Published Online: December 1, 2017

View Article titled, Experimental Evaluation of Novel Hybrid Microwave/Ultrasonic Technique to Locate and Characterize Pipe Wall Thinning

Topics: Calibration, Microwaves, Pipes, Probes, Shapes, Signals

Journal Articles

Using Nonlinear Kinematic Hardening Material Models for Elastic–Plastic Ratcheting Analysis

Jürgen Rudolph, Tim Gilman, Bill Weitze, Adrian Willuweit, Arturs Kalnins

J. Pressure Vessel Technol. October 2016, 138(5): 051205.

Paper No: PVT-15-1231

DOI: https://doi.org/10.1115/1.4033092

Published Online: April 29, 2016

View Article titled, Using Nonlinear Kinematic Hardening Material Models for Elastic–Plastic Ratcheting Analysis

Topics: Calibration, Hardening, Kinematics, Stress, Temperature, Carbon steel, Stress-strain curves, Stainless steel

Journal Articles

Using the Nonlinear Kinematic Hardening Material Model of Chaboche for Elastic–Plastic Ratcheting Analysis

Arturs Kalnins, Jürgen Rudolph, Adrian Willuweit

J. Pressure Vessel Technol. June 2015, 137(3): 031006.

Paper No: PVT-14-1036

DOI: https://doi.org/10.1115/1.4028659

Published Online: June 1, 2015

View Article titled, Using the Nonlinear Kinematic Hardening Material Model of Chaboche for Elastic–Plastic Ratcheting Analysis

Topics: Calibration, Stress, Temperature

Journal Articles

A Unified Viscoplastic Model for High Temperature Low Cycle Fatigue of Service-Aged P91 Steel

R. A. Barrett, T. P. Farragher, C. J. Hyde, N. P. O'Dowd, P. E. O'Donoghue, S. B. Leen

J. Pressure Vessel Technol. April 2014, 136(2): 021402.

Paper No: PVT-13-1090

DOI: https://doi.org/10.1115/1.4025618

Published Online: January 7, 2014

View Article titled, A Unified Viscoplastic Model for High Temperature Low Cycle Fatigue of Service-Aged P91 Steel

Topics: Calibration, Cycles, Hardening, High temperature, Low cycle fatigue, Steel, Stress, Temperature, Kinematics, Viscoplasticity

Journal Articles

High-Density Polyethylene Piping Butt-Fusion Joint Examination Using Ultrasonic Phased Array

Caleb Frederick, Allen Porter, David Zimmerman

J. Pressure Vessel Technol. October 2010, 132(5): 051501.

DOI: https://doi.org/10.1115/1.4001212

Published Online: August 25, 2010

View Article titled, High-Density Polyethylene Piping Butt-Fusion Joint Examination Using Ultrasonic Phased Array

Topics: Calibration, Cold fusion, Density, Inspection, Pipes, Polyethylene pipes, Probes, Wall thickness, Wedges

Journal Articles

The Assessment of Residual Stress Effects on Ductile Tearing Using Continuum Damage Mechanics

Andrew H. Sherry, Mark A. Wilkes, John K. Sharples, Peter J. Budden

J. Pressure Vessel Technol. November 2008, 130(4): 041212.

DOI: https://doi.org/10.1115/1.2967876

Published Online: October 14, 2008

View Article titled, The Assessment of Residual Stress Effects on Ductile Tearing Using Continuum Damage Mechanics

Topics: Ductile fracture, Fracture (Materials), Stress, Calibration, Residual stresses, Fracture toughness, Damage mechanics, Plane strain

Journal Articles

Application of an Ultrasonic Technique to Assess Contact Performance of Bolted Joints

Massimiliano Pau, Antonio Baldi

J. Pressure Vessel Technol. February 2007, 129(1): 175–185.

DOI: https://doi.org/10.1115/1.2435719

Published Online: July 13, 2006

View Article titled, Application of an Ultrasonic Technique to Assess Contact Performance of Bolted Joints

Topics: Bolted joints, Pressure, Calibration, Finite element model, Reflection, Stress

Journal Articles

Combination of Longitudinal and Transverse Ultrasonic Waves for In Situ Control of the Tightening of Bolts

Salim Chaki, Gilles Corneloup, Ivan Lillamand, Henri Walaszek

J. Pressure Vessel Technol. August 2007, 129(3): 383–390.

DOI: https://doi.org/10.1115/1.2748821

Published Online: June 6, 2006

View Article titled, Combination of Longitudinal and Transverse Ultrasonic Waves for In Situ Control of the Tightening of Bolts

Topics: Calibration, Flight, Stress, Ultrasonic measurement, Ultrasonic waves, Waves, Acoustics

Journal Articles

A Sensitive Ultrasonic Approach to NDE of Tightly Closed Small Cracks

S. R. Ahmed, M. Saka

J. Pressure Vessel Technol. November 1998, 120(4): 384–392.

DOI: https://doi.org/10.1115/1.2842348

Published Online: November 1, 1998

View Article titled, A Sensitive Ultrasonic Approach to NDE of Tightly Closed Small Cracks

Topics: Fracture (Materials), Nondestructive evaluation, Fatigue cracks, Longitudinal waves, Calibration, Computers, Inverse problems, Stress, Ultrasonic testing

Journal Articles

NDE of a 3-D Surface Crack Using Closely Coupled Probes for DCPD Technique

M. Saka, D. Hirota, H. Abe´, I. Komura

J. Pressure Vessel Technol. November 1998, 120(4): 374–378.

DOI: https://doi.org/10.1115/1.2842346

Published Online: November 1, 1998

View Article titled, NDE of a 3-D Surface Crack Using Closely Coupled Probes for DCPD Technique

Topics: Nondestructive evaluation, Probes, Surface cracks, Calibration, Sensors, Fracture (Materials)

Journal Articles

NDE of a Crack by Using Closely Coupled Probes for DCPD Technique

M. Saka, A. Oouchi, H. Abe´

J. Pressure Vessel Technol. May 1996, 118(2): 198–202.

DOI: https://doi.org/10.1115/1.2842181

Published Online: May 1, 1996

View Article titled, NDE of a Crack by Using Closely Coupled Probes for DCPD Technique

Topics: Fracture (Materials), Nondestructive evaluation, Probes, Calibration, Flow (Dynamics)

Journal Articles

J Estimation Method for a Semi-Elliptical Surface Flaw in a Cylinder

K. K. Yoon, D. E. Killian

J. Pressure Vessel Technol. February 1995, 117(1): 66–70.

DOI: https://doi.org/10.1115/1.2842092

Published Online: February 1, 1995

View Article titled, J Estimation Method for a Semi-Elliptical Surface Flaw in a Cylinder

Topics: Calibration, Computer software, Constitutive equations, Cylinders, Deformation, Design, Finite element analysis, Fracture (Materials), Fracture mechanics, Plasticity

Journal Articles

Assessment of Fully Plastic J and C* -Integral Solutions for Application to Elastic-Plastic Fracture and Creep Crack Growth

D. R. Lee, J. M. Bloom

J. Pressure Vessel Technol. August 1993, 115(3): 228–234.

DOI: https://doi.org/10.1115/1.2929521

Published Online: August 1, 1993

View Article titled, Assessment of Fully Plastic J and C* -Integral Solutions for Application to Elastic-Plastic Fracture and Creep Crack Growth

Topics: Creep, Fracture (Materials), Finite element analysis, Hardening, Stress, Calibration, Deformation, Errors, Failure, Finite element methods

Journal Articles

Fracture Toughness of Aged Stainless Steel Primary Piping Welds Evaluated by Multiple and Single-Specimen Methods

F. H. Huang

J. Pressure Vessel Technol. May 1993, 115(2): 201–206.

DOI: https://doi.org/10.1115/1.2929516

Published Online: May 1, 1993

View Article titled, Fracture Toughness of Aged Stainless Steel Primary Piping Welds Evaluated by Multiple and Single-Specimen Methods

Topics: Fracture toughness, Pipes, Stainless steel, Welded joints, Electric potential, Fracture (Materials), Temperature, Calibration, Construction, Ductile fracture

Journal Articles

Validation of the Deformation Plasticity Failure Assessment Diagram (DPFAD) Approach—The Case of an Axial Flaw in a Pressurized Cylinder

J. M. Bloom

J. Pressure Vessel Technol. August 1990, 112(3): 213–217.

DOI: https://doi.org/10.1115/1.2928616

Published Online: August 1, 1990

View Article titled, Validation of the Deformation Plasticity Failure Assessment Diagram (DPFAD) Approach—The Case of an Axial Flaw in a Pressurized Cylinder

Topics: Cylinders, Deformation, Failure, Plasticity, Pipes, Vessels, Fracture (Materials), Calibration, Finite element analysis, Pressure

Journal Articles

Extensions of the Failure Assessment Diagram Approach Semi-Elliptical Flaw in Pressurized Cylinders—Part II

J. M. Bloom

J. Pressure Vessel Technol. November 1986, 108(4): 485–489.

DOI: https://doi.org/10.1115/1.3264817

Published Online: November 1, 1986

View Article titled, Extensions of the Failure Assessment Diagram Approach Semi-Elliptical Flaw in Pressurized Cylinders—Part II

Topics: Cylinders, Failure, Interpolation, Calibration, Deformation, Finite element analysis, Fracture (Materials), Plasticity, Wall thickness, Work hardening

Journal citation

NARROW

Validation of Monte Carlo Simulation Technique for Calibration of Cleavage Fracture Model Parameters, With the Calibrated Values From Experimental Results for Reactor Pressure Vessel Material 20MnMoNi55 Steel in the Lower Self of Ductile-to-Brittle Transition Region

Technical Basis Part 2 for Code Case N-889: Reference Stress Corrosion Crack Growth Rate Curves for Irradiated Austenitic Stainless Steels in Light Water Reactor Environments

Technical Basis Part 1 for Code Case N-889: Data Selection and Modeling of Stress Corrosion Crack Growth Rates for Irradiated Austenitic Stainless Steels in Light Water Reactor Environments

Experimental Evaluation of Novel Hybrid Microwave/Ultrasonic Technique to Locate and Characterize Pipe Wall Thinning

Using Nonlinear Kinematic Hardening Material Models for Elastic–Plastic Ratcheting Analysis

Using the Nonlinear Kinematic Hardening Material Model of Chaboche for Elastic–Plastic Ratcheting Analysis

A Unified Viscoplastic Model for High Temperature Low Cycle Fatigue of Service-Aged P91 Steel

High-Density Polyethylene Piping Butt-Fusion Joint Examination Using Ultrasonic Phased Array

The Assessment of Residual Stress Effects on Ductile Tearing Using Continuum Damage Mechanics

Application of an Ultrasonic Technique to Assess Contact Performance of Bolted Joints

Combination of Longitudinal and Transverse Ultrasonic Waves for In Situ Control of the Tightening of Bolts

A Sensitive Ultrasonic Approach to NDE of Tightly Closed Small Cracks

NDE of a 3-D Surface Crack Using Closely Coupled Probes for DCPD Technique

NDE of a Crack by Using Closely Coupled Probes for DCPD Technique

J Estimation Method for a Semi-Elliptical Surface Flaw in a Cylinder

Assessment of Fully Plastic J and C* -Integral Solutions for Application to Elastic-Plastic Fracture and Creep Crack Growth

Fracture Toughness of Aged Stainless Steel Primary Piping Welds Evaluated by Multiple and Single-Specimen Methods

Validation of the Deformation Plasticity Failure Assessment Diagram (DPFAD) Approach—The Case of an Axial Flaw in a Pressurized Cylinder

Extensions of the Failure Assessment Diagram Approach Semi-Elliptical Flaw in Pressurized Cylinders—Part II

Journals

Conference Proceedings

eBooks

Resources

Opportunities

Journals

Conference Proceedings

eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only