Volume 125 Issue 3 | J. Pressure Vessel Technol.

Skip Nav Destination

Special Issue on Pressure Vessels Technology Applied to Gun Tubes

John G. Hetherington, Anthony P. Parker, John H. Underwood

J. Pressure Vessel Technol. August 2003, 125(3): 241. doi: https://doi.org/10.1115/1.1590677

Extract

View articletitled, Special Issue on Pressure Vessels Technology Applied to Gun Tubes

Open the PDF for in another window

Topics: Gun barrels , Pressure vessels

Technical Papers

Erosions and Their Effect on the Fatigue Life of Thick Walled, Autofrettaged, Pressurized Vessels

C. Levy, M. Perl, Q. Ma

J. Pressure Vessel Technol. August 2003, 125(3): 242–247. doi: https://doi.org/10.1115/1.1593698

Abstract

View articletitled, Erosions and Their Effect on the Fatigue Life of Thick Walled, Autofrettaged, Pressurized Vessels

Open the PDF for in another window

Topics: Autofrettage , Erosion , Fracture (Materials)

Elasto-Plastic Stresses in Thick Walled Cylinders

Joseph Perry, Jacob Aboudi

J. Pressure Vessel Technol. August 2003, 125(3): 248–252. doi: https://doi.org/10.1115/1.1593078

Abstract

View articletitled, Elasto-Plastic Stresses in Thick Walled Cylinders

Open the PDF for in another window

Topics: Cylinders , Pressure , Residual stresses , Stress , Autofrettage , Work hardening , Finite difference methods , Stress concentration

Failure Studies on Flow Formed High Strength Pressure Vessel: A Case Study

K. M. Rajan, K. Narasimhan

J. Pressure Vessel Technol. August 2003, 125(3): 253–259. doi: https://doi.org/10.1115/1.1593702

Abstract

View articletitled, Failure Studies on Flow Formed High Strength Pressure Vessel: A Case Study

Open the PDF for in another window

Topics: Failure , Flow (Dynamics) , Microcracks , Pressure vessels , Steel , Fracture (Materials) , Tensile strength

Calculation of Stress Intensity Factors and Crack Opening Displacements for Cracks Subjected to Complex Stress Fields

A. Kiciak, G. Glinka, D. J. Burns

J. Pressure Vessel Technol. August 2003, 125(3): 260–266. doi: https://doi.org/10.1115/1.1593080

Abstract

View articletitled, Calculation of Stress Intensity Factors and Crack Opening Displacements for Cracks Subjected to Complex Stress Fields

Open the PDF for in another window

Topics: Fracture (Materials) , Stress , Weight (Mass) , Stress concentration

On Thick-Walled Cylinder Under Internal Pressure

W. Zhao, R. Seshadri, R. N. Dubey

J. Pressure Vessel Technol. August 2003, 125(3): 267–273. doi: https://doi.org/10.1115/1.1593082

Abstract

View articletitled, On Thick-Walled Cylinder Under Internal Pressure

Open the PDF for in another window

Topics: Cylinders , Deformation , Geometry , Pressure , Stress , Boundary-value problems , Work hardening , Fracture (Materials) , Stress-strain curves

Finite Element Simulation of the Sachs Boring Method of Measuring Residual Stresses in Thick-Walled Cylinders

R. R. de Swardt

J. Pressure Vessel Technol. August 2003, 125(3): 274–276. doi: https://doi.org/10.1115/1.1593700

Abstract

View articletitled, Finite Element Simulation of the Sachs Boring Method of Measuring Residual Stresses in Thick-Walled Cylinders

Open the PDF for in another window

Topics: Cylinders , Finite element analysis , Residual stresses , Simulation , Stress , Curve fitting , Neutron diffraction

Characterization of Steels Using a Revised Kinematic Hardening Model Incorporating Bauschinger Effect

Anthony P. Parker, Edward Troiano, John H. Underwood, Charles Mossey

J. Pressure Vessel Technol. August 2003, 125(3): 277–281. doi: https://doi.org/10.1115/1.1593071

Abstract

View articletitled, Characterization of Steels Using a Revised Kinematic Hardening Model Incorporating Bauschinger Effect

Open the PDF for in another window

Topics: Steel , Autofrettage , Stress , Hardening , Kinematics

Residual Stresses and Lifetimes of Tubes Subjected to Shrink Fit Prior to Autofrettage

Anthony P. Parker, David P. Kendall, Consultant

J. Pressure Vessel Technol. August 2003, 125(3): 282–286. doi: https://doi.org/10.1115/1.1593074

Abstract

View articletitled, Residual Stresses and Lifetimes of Tubes Subjected to Shrink Fit Prior to Autofrettage

Open the PDF for in another window

Topics: Autofrettage , Fatigue , Hoop stress , Pressure , Residual stresses , Stress , Cylinders , Fittings , Design

Critical Fracture Processes in Army Cannons: A Review

John H. Underwood, Edward Troiano

J. Pressure Vessel Technol. August 2003, 125(3): 287–292. doi: https://doi.org/10.1115/1.1593075

Abstract

View articletitled, Critical Fracture Processes in Army Cannons: A Review

Open the PDF for in another window

Topics: Artillery , Fracture (Materials) , Fracture (Process) , Steel , Fatigue life , Fracture toughness , Stress , Fatigue

Crack Propagation in a Gun Barrel Due to the Firing Thermo-Mechanical Stresses

Eric Petitpas, B. Campion

J. Pressure Vessel Technol. August 2003, 125(3): 293–298. doi: https://doi.org/10.1115/1.1592813

Abstract

View articletitled, Crack Propagation in a Gun Barrel Due to the Firing Thermo-Mechanical Stresses

Open the PDF for in another window

Topics: Firing , Fracture (Materials) , Stress , Thermomechanics , Autofrettage , Crack propagation , Gun barrels

Thermal Damage, Cracking and Rapid Erosion of Cannon Bore Coatings

John H. Underwood, Anthony P. Parker, Gregory N. Vigilante, Paul J. Cote

J. Pressure Vessel Technol. August 2003, 125(3): 299–304. doi: https://doi.org/10.1115/1.1593077

Abstract

View articletitled, Thermal Damage, Cracking and Rapid Erosion of Cannon Bore Coatings

Open the PDF for in another window

Topics: Artillery , Coating processes , Coatings , Damage , Firing , Lasers , Steel , Heating , Fracture (Materials) , Failure

Finite Element Simulation of Crack Compliance Experiments to Measure Residual Stresses in Thick-Walled Cylinders

R. R. de Swardt

J. Pressure Vessel Technol. August 2003, 125(3): 305–308. doi: https://doi.org/10.1115/1.1593076

Abstract

View articletitled, Finite Element Simulation of Crack Compliance Experiments to Measure Residual Stresses in Thick-Walled Cylinders

Open the PDF for in another window

Topics: Cylinders , Finite element analysis , Fracture (Materials) , Neutron diffraction , Residual stresses , Simulation , Stress , Finite element model , Modeling

Hydraulic Versus Swage Autofrettage and Implications of the Bauschinger Effect

A. P. Parker, G. P. O’Hara, Consultant, J. H. Underwood

J. Pressure Vessel Technol. August 2003, 125(3): 309–314. doi: https://doi.org/10.1115/1.1593079

Abstract

View articletitled, Hydraulic Versus Swage Autofrettage and Implications of the Bauschinger Effect

Open the PDF for in another window

Topics: Autofrettage , Stress , Pressure , Fatigue

The Influence of Additives on the Temperature, Heat Transfer, Wear, Fatigue Life, and Self Ignition Characteristics of a 155 mm Gun

Dr. B. Lawton, Reader in Thermal Power,

J. Pressure Vessel Technol. August 2003, 125(3): 315–320. doi: https://doi.org/10.1115/1.1593069

Abstract

View articletitled, The Influence of Additives on the Temperature, Heat Transfer, Wear, Fatigue Life, and Self Ignition Characteristics of a 155 mm Gun

Open the PDF for in another window

Topics: Fatigue life , Heat transfer , Ignition , Temperature , Wear , Ammunition

Actual Unloading Behavior and Its Significance on Residual Stress in Machined Autofrettaged Tubes

Hamid Jahed, Associate Professor, Ghader Ghanbari, Graduate Student

J. Pressure Vessel Technol. August 2003, 125(3): 321–325. doi: https://doi.org/10.1115/1.1593070

Abstract

View articletitled, Actual Unloading Behavior and Its Significance on Residual Stress in Machined Autofrettaged Tubes

Open the PDF for in another window

Topics: Autofrettage , Stress , Steel , Hardening

Comparison of Methods for Calculating Stress Intensity Factors for the Thread of a Pressure Vessel Closure and of a Gun Breech Ring

David P. Kendall, Consultant

J. Pressure Vessel Technol. August 2003, 125(3): 326–329. doi: https://doi.org/10.1115/1.1593699

Abstract

View articletitled, Comparison of Methods for Calculating Stress Intensity Factors for the Thread of a Pressure Vessel Closure and of a Gun Breech Ring

Open the PDF for in another window

Topics: Pressure vessels , Stress , Thread , Fatigue cracks , Weight (Mass) , Fracture (Materials)

Experimental Data, Numerical Fit and Fatigue Life Calculations Relating to the Bauschinger Effect in High Strength Armament Steels

Edward Troiano, Anthony P. Parker, John Underwood, Charles Mossey

J. Pressure Vessel Technol. August 2003, 125(3): 330–334. doi: https://doi.org/10.1115/1.1593072

Abstract

View articletitled, Experimental Data, Numerical Fit and Fatigue Life Calculations Relating to the Bauschinger Effect in High Strength Armament Steels

Open the PDF for in another window

Topics: Fatigue life , Residual stresses , Steel , Stress , Weapons , Fatigue testing , Compressive strength , Pressure vessels , Elastic moduli , Stainless steel

Application of Laser Pulse Heating to Simulate Thermomechanical Damage at Gun Bore Surfaces

Paul J. Cote, Sabrina L. Lee, Mark E. Todaro, Gay Kendall

J. Pressure Vessel Technol. August 2003, 125(3): 335–341. doi: https://doi.org/10.1115/1.1593697

Abstract

View articletitled, Application of Laser Pulse Heating to Simulate Thermomechanical Damage at Gun Bore Surfaces

Open the PDF for in another window

Topics: Cavitation , Combustion chambers , Damage , Firing , Fracture (Materials) , Heat , Heating , Lasers , Steel , Stress

Numerical Analysis of the Effect of Machining on the Depth of Yield, Maximum Firing Pressure and Residual Stress Profile in an Autofrettaged Gun Tube

Amer Hameed, R. D. Brown, J. G. Hetherington

J. Pressure Vessel Technol. August 2003, 125(3): 342–346. doi: https://doi.org/10.1115/1.1593081

Abstract

View articletitled, Numerical Analysis of the Effect of Machining on the Depth of Yield, Maximum Firing Pressure and Residual Stress Profile in an Autofrettaged Gun Tube

Open the PDF for in another window

Topics: Autofrettage , Firing , Gun barrels , Machining , Pressure , Stress , Hoop stress , Finite element analysis

A Numerical Study of Swage Autofrettage

Michael J. Iremonger, Gurdip S. Kalsi, Directorate of Research and Applied Science,

J. Pressure Vessel Technol. August 2003, 125(3): 347–351. doi: https://doi.org/10.1115/1.1593073

Abstract

View articletitled, A Numerical Study of Swage Autofrettage

Open the PDF for in another window

Topics: Autofrettage , Deformation , Geometry , Gun barrels , Numerical analysis , Stress , Modeling

Influence of the “Critical Velocity” Phenomenon on Chromium-Plated Gun Barrels

Ju¨rg Ho¨lzle

J. Pressure Vessel Technol. August 2003, 125(3): 352–354. doi: https://doi.org/10.1115/1.1593701

Abstract

View articletitled, Influence of the “Critical Velocity” Phenomenon on Chromium-Plated Gun Barrels

Open the PDF for in another window

Topics: Gun barrels , Design , Pressure , Chromium plating , Oscillations , Waves

Special Issue on Pressure Vessels Technology Applied to Gun Tubes

Technical Papers

Erosions and Their Effect on the Fatigue Life of Thick Walled, Autofrettaged, Pressurized Vessels

Elasto-Plastic Stresses in Thick Walled Cylinders

Failure Studies on Flow Formed High Strength Pressure Vessel: A Case Study

Calculation of Stress Intensity Factors and Crack Opening Displacements for Cracks Subjected to Complex Stress Fields

On Thick-Walled Cylinder Under Internal Pressure

Finite Element Simulation of the Sachs Boring Method of Measuring Residual Stresses in Thick-Walled Cylinders

Characterization of Steels Using a Revised Kinematic Hardening Model Incorporating Bauschinger Effect

Residual Stresses and Lifetimes of Tubes Subjected to Shrink Fit Prior to Autofrettage

Critical Fracture Processes in Army Cannons: A Review

Crack Propagation in a Gun Barrel Due to the Firing Thermo-Mechanical Stresses

Thermal Damage, Cracking and Rapid Erosion of Cannon Bore Coatings

Finite Element Simulation of Crack Compliance Experiments to Measure Residual Stresses in Thick-Walled Cylinders

Hydraulic Versus Swage Autofrettage and Implications of the Bauschinger Effect

The Influence of Additives on the Temperature, Heat Transfer, Wear, Fatigue Life, and Self Ignition Characteristics of a 155 mm Gun

Actual Unloading Behavior and Its Significance on Residual Stress in Machined Autofrettaged Tubes

Comparison of Methods for Calculating Stress Intensity Factors for the Thread of a Pressure Vessel Closure and of a Gun Breech Ring

Experimental Data, Numerical Fit and Fatigue Life Calculations Relating to the Bauschinger Effect in High Strength Armament Steels

Application of Laser Pulse Heating to Simulate Thermomechanical Damage at Gun Bore Surfaces

Numerical Analysis of the Effect of Machining on the Depth of Yield, Maximum Firing Pressure and Residual Stress Profile in an Autofrettaged Gun Tube

A Numerical Study of Swage Autofrettage

Influence of the “Critical Velocity” Phenomenon on Chromium-Plated Gun Barrels

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only