Abstract
The effect of shot peening on oxidation behavior of P92 steel was investigated under the steam environment of 600 °C. Evolution of microstructure, hardness and residual stress under different air pressure of shot peening were discussed. On the shot peened surface, a stable hematite outer layer was detected by using scanning electron microscope (SEM), energy dispersive spectrometer (EDS), and X-ray diffraction (XRD) analysis. The increased oxidation resistance of hematite layer was ascribed to the increased outward diffusion of Cr and the decreased inward diffusion of oxygen. In addition, the role of residual stress in the oxygen diffusion was discussed.
Issue Section:
Materials and Fabrication
References
1.
Ennis
,
P. J.
, and
Czyrska-Filemonowicz
,
A.
, 2003
, “
Recent Advances in Creep-Resistant Steels for Power Plant Applications
,” Sadhana
,
28
(3–4
), pp. 709
–730
.10.1007/BF027064552.
Zhu
,
L. H.
,
Zhao
,
Q. X.
,
Gu
,
H. C.
, and
Lu
,
Y. S.
, 1999
, “
Application of Instrumented Impact Test for Studying Dynamic Fracture Property of 9Cr-1Mo-V-Nb-N Steel
,” Eng. Fract. Mech.
,
64
(3
), pp. 327
–336
.10.1016/S0013-7944(99)00063-63.
Pandey
,
C.
,
Mahapatra
,
M. M.
,
Kumar
,
P.
,
Kumar
,
P.
,
Saini
,
N.
,
Thakare
,
J. G.
, and
Kumar
,
S.
, 2019
, “
Study on Effect of Double Austenitization Treatment on Fracture Morphology Tensile Tested Nuclear Grade P92 Steel
,” Eng. Failure Anal.
,
96
, pp. 158
–167
.10.1016/j.engfailanal.2018.09.0364.
Saini
,
N.
,
Pandey
,
C.
, and
Mahapatra
,
M. M.
, 2017
, “
Effect of Normalizing Temperature on Fracture Characteristic of Tensile and Impact Tested Creep Strength-Enhanced Ferritic P92 Steel
,” J. Mater. Eng. Performance
,
26
(11
), pp. 5414
–5424
.10.1007/s11665-017-2988-95.
Zhang
,
Z.
,
Hu
,
Z. F.
,
Zhang
,
L. F.
,
Chen
,
K.
, and
Singh
,
P. M.
, 2018
, “
Effect of Temperature and Dissolved Oxygen on Stress Corrosion Cracking Behavior of P92 Ferritic-Martensitic Steel in Supercritical Water Environment
,” J. Nucl. Mater.
,
498
, pp. 89
–102
.10.1016/j.jnucmat.2017.10.0246.
Zhu
,
Z. L.
,
Li
,
R. T.
,
Liu
,
X.
,
Khan
,
H. I.
,
Xu
,
H.
, and
Zhang
,
N. Q.
, 2020
, “
The Characterization of Oxide Scales Formed on Ferritic-Martensitic Steel in Supercritical Water With Dissolved Oxygen
,” Corros. Sci.
,
174
, p. 108810
.10.1016/j.corsci.2020.1088107.
Bak
,
S. H.
, and
Lee
,
D. B.
, 2011
, “
Oxidation of P92 Steel Weldment Between 600 and 800 °C in Air
,” Met. Mater. Int.
,
17
(6
), pp. 949
–956
.10.1007/s12540-011-6013-98.
Hoey
,
T. M.
,
Chen
,
R.
,
McCartney
,
D. G.
,
Sun
,
W.
,
Mansfield
,
J.
,
Barnard
,
P.
, and
Foster
,
J.
, 2015
, “
Requirement for and Use of Coated P92 Steel for Enhanced Structural Integrity at High Temperature
,” Proc. Int. Symp. Phys. Mater.
,
128
(4
), pp. 514
–519
.10.12693/APhysPolA.128.5149.
Zhang
,
N.
,
Xu
,
H.
,
Li
,
B.
,
Bai
,
Y.
, and
Liu
,
D.
, 2012
, “
Influence of the Dissolved Oxygen Content on Corrosion of the Ferritic-Martensitic Steel P92 in Supercritical Water
,” Corros. Sci.
,
56
, pp. 123
–128
.10.1016/j.corsci.2011.11.01310.
Agüero
,
A.
,
González
,
V.
,
Gutiérrez
,
M.
, and
Muelas
,
R.
, 2013
, “
Oxidation Under Pure Steam: Cr Based Protective Oxides and Coatings
,” Surf. Coat. Technol.
,
237
, pp. 30
–38
.10.1016/j.surfcoat.2013.09.01611.
Yin
,
K.
,
Qiu
,
S.
,
Tang
,
R.
,
Zhang
,
Q.
, and
Zhang
,
L.
, 2009
, “
Corrosion Behavior of Ferritic/Martensitic Steel P92 in Supercritical Water
,” J. Supercrit. Fluids
,
50
(3
), pp. 235
–239
.10.1016/j.supflu.2009.06.01912.
Tan
,
L.
,
Ren
,
X.
,
Sridharan
,
K.
, and
Allen
,
T. R.
, 2008
, “
Effect of Shot-Peening on the Oxidation of Alloy 800H Exposed to Supercritical Water and Cyclic Oxidation
,” Corros. Sci.
,
50
(7
), pp. 2040
–2046
.10.1016/j.corsci.2008.04.00813.
Yue
,
Z. W.
,
Fu
,
M.
,
Wang
,
X. G.
, and
Li
,
X. G.
, 2012
, “
Effect of Shot Peening on the Oxidation Resistance of TP304H and HR3C Steels in Water Vapor
,” Oxid. Met.
,
77
(1–2
), pp. 17
–26
.10.1007/s11085-011-9270-614.
Ostwald
,
C.
, and
Grabke
,
H. J.
, 2004
, “
Initial Oxidation and Chromium Diffusion. I. Effects of Surface Working on 9–20% Cr Steels
,” Corros. Sci.
,
46
(5
), pp. 1113
–1128
.10.1016/j.corsci.2003.09.00415.
Naraparaju
,
R.
,
Christ
,
H. J.
,
Renner
,
F. U.
, and
Kostka
,
A.
, 2011
, “
Effect of Shot-Peening on the Oxidation Behaviour of Boiler Steels
,” Oxid. Met.
,
76
(3–4
), pp. 233
–245
.10.1007/s11085-011-9250-x16.
Li
,
X. G.
, and
He
,
J. W.
, 2006
, “
Effect of Shot Blasting on Oxidation Behavior of TP304H Steel at 610–770 °C in Water Vapor
,” Mater. Lett.
,
60
(3
), pp. 339
–344
.10.1016/j.matlet.2005.08.04617.
Wagner
,
C.
, 1951
, “
Theoretical Analysis of the Current Density Distribution in Electrolytic Cells
,” J. Electrochem. Soc.
,
98
(3
), pp. 116
–128
.10.1149/1.277811318.
Peng
,
X.
,
Yan
,
J.
,
Zhou
,
Y.
, and
Wang
,
F.
, 2005
, “
Effect of Grain Refinement on the Resistance of 304 Stainless Steel to Breakaway Oxidation in Wet Air
,” Acta Mater.
,
53
(19
), pp. 5079
–5088
.10.1016/j.actamat.2005.07.01919.
Zhan
,
K.
,
Jiang
,
C. H.
,
Wu
,
X. Y.
, and
Ji
,
V.
, 2012
, “
Surface Layer Characteristics of S30432 Austenite Stainless Steel After Shot Peening
,” Mater. Trans.
,
53
(5
), pp. 1002
–1006
.10.2320/matertrans.M201139020.
Holzapfel
,
H.
,
Schulze
,
V.
,
Vohringer
,
O.
, and
Macherauch
,
E.
, 1998
, “
Residual Stress Relaxation in an AISI 4140 Steel Due to Quasistatic and Cyclic Loading at Higher Temperatures
,” Mater. Sci. Eng. A
,
248
(1–2
), pp. 9
–18
.10.1016/S0921-5093(98)00522-X21.
Evans
,
H. E.
,
Norfolk
,
D. J.
, and
Swan
,
T.
, 1978
, “
Perturbation of Parabolic Kinetics Resulting From the Accumulation of Stress in Protective Oxide Layers
,” J. Electrochem. Soc.
,
125
(7
), pp. 1180
–1185
.10.1149/1.213164422.
Favergeon
,
J.
,
Montesin
,
T.
, and
Bertrand
,
G.
, 2005
, “
Mechano-Chemical Aspects of High Temperature Oxidation: A Mesoscopic Model Applied to Zirconium Alloys
,” Oxid. Met.
,
64
(3–4
), pp. 253
–279
.10.1007/s11085-005-6563-723.
Raceanu
,
L.
,
Optasanu
,
V.
,
Montesin
,
T.
,
Montay
,
G.
, and
François
,
M.
, 2013
, “
Shot-Peening of Pre-Oxidized Plates of Zirconium: Influence of Residual Stress on Oxidation
,” Oxid. Met.
,
79
(1–2
), pp. 135
–145
.10.1007/s11085-012-9336-024.
Zhu
,
K.
,
Jiang
,
C.
,
Li
,
Z.
,
Du
,
L.
,
Zhao
,
Y.
,
Chai
,
Z.
,
Wang
,
L.
, and
Chen
,
M.
, 2016
, “
Residual Stress and Microstructure of the CNT/6061 Composite After Shot Peening
,” Mater. Des.
,
107
, pp. 333
–340
.10.1016/j.matdes.2016.06.03025.
Saunders
,
S. R. J.
,
Monteiro
,
M.
, and
Rizzo
,
F.
, 2008
, “
The Oxidation Behaviour of Metals and Alloys at High Temperatures in Atmospheres Containing Water Vapour: A Review
,” Prog. Mater. Sci.
,
53
(5
), pp. 775
–837
.10.1016/j.pmatsci.2007.11.00126.
Ren
,
X.
,
Sridharan
,
K.
, and
Allen
,
T. R.
, 2006
, “
Corrosion of Ferritic-Martensitic Steel HT9 in Supercritical Water
,” J. Nucl. Mater.
,
358
(2–3
), pp. 227
–234
.10.1016/j.jnucmat.2006.07.01027.
Bischoff
,
J.
,
Motta
,
A. T.
, and
Comstock
,
R. J.
, 2009
, “
Evolution of the Oxide Structure of 9Cr0DS Steel Exposed to Supercritical Water
,” J. Nucl. Mater.
,
392
(2
), pp. 272
–279
.10.1016/j.jnucmat.2009.03.01528.
Berger
,
R.
,
Bexell
,
U. T.
,
Grehk
,
M.
, and
Hörnström
,
S. E.
, 2007
, “
A Comparative Study of the Corrosion Protective Properties of Chromium and Chromium Free Passivation Methods
,” Surf. Coat. Technol.
,
202
(2
), pp. 391
–397
.10.1016/j.surfcoat.2007.06.00129.
Ropo
,
M.
,
Kokko
,
K.
,
Punkkinen
,
M. P. J.
,
Hogmark
,
S.
,
Kollár
,
J.
,
Johansson
,
B.
,
VitosPhys
,
L.
, and
Rev
,
B.
, 2007
, “
Theoretical Evidence of the Compositional Threshold Behavior of FeCr Surfaces
,” Am. Phys. Soc.
,
76
(22
), p. 220401
.10.1103/PhysRevB.76.22040130.
Essuman
,
E.
,
Meier
,
G. H.
,
Żurek
,
J.
,
Hänsel
,
M.
,
Singheiser
,
L.
, and
Quadakkers
,
W. J.
, 2007
, “
Enhanced Internal Oxidation as Trigger for Breakaway Oxidation of Fe–Cr Alloys in Gases Containing Water Vapor
,” Scr. Mater.
,
57
(9
), pp. 845
–848
.10.1016/j.scriptamat.2007.06.05831.
Martinelli
,
L.
,
Balbaud-Célérier
,
F.
,
Terlain
,
A.
,
Bosonnet
,
S.
,
Picard
,
G.
, and
Santarini
,
G.
, 2008
, “
Oxidation Mechanism of an Fe–9Cr–1Mo Steel by Liquid Pb–Bi Eutectic Alloy at 470 °C (Part II)
,” Corros. Sci.
,
50
(9
), pp. 2537
–2548
.10.1016/j.corsci.2008.06.05132.
Huang
,
J.
,
Meyer
,
M.
, and
Pontikis
,
V.
, 1989
, “
Is Pipe Diffusion in Metals Vacancy Controlled? A Molecular Dynamics Study of an Edge Dislocation in Copper
,” Phys. Rev. Lett.
,
63
(6
), pp. 628
–631
.10.1103/PhysRevLett.63.62833.
Ma
,
Z. W.
,
Shen
,
T. L.
,
Wang
,
Z. G.
,
Zhou
,
T.
,
Chang
,
H. L.
,
Jin
,
P.
,
Wei
,
K. F.
,
Pang
,
L. L.
,
Chai
,
J. L.
, and
Liu
,
C.
, 2022
, “
Improving the Oxidation Resistance of SIMP Steel to Liquid Pb-Bi Eutectic by Shot Peening Treatments
,” Appl. Surf. Sci.
,
578
, p. 151910
.10.1016/j.apsusc.2021.15191034.
Schiffner
,
K.
, and
Helling
,
C. D.
, 1999
, “
Simulation of Residual Stresses by Shot Peening
,” Comput. Struct.
,
72
(1–3
), pp. 329
–340
.10.1016/S0045-7949(99)00012-735.
Li
,
J. K.
,
Mei
,
Y.
,
Duo
,
W.
, and
Renzhi
,
W.
, 1991
, “
Mechanical Approach to the Residual Stress Field Induced by Shot Peening
,” Mater. Sci. Eng.
,
147
(2
), pp. 167
–173
.10.1016/0921-5093(91)90843-C36.
Franchim
,
A. S.
,
de Campos
,
V. S.
,
Travessa
,
D. N.
, and
Neto
,
C.
, 2009
, “
Analytical Modelling for Residual Stresses Produced by Shot Peening
,” Mater. Des.
,
30
(5
), pp. 1556
–1560
.10.1016/j.matdes.2008.07.04037.
Miao
,
H.
,
Zuo
,
D.
,
Wang
,
M.
,
Zhang
,
R.
, and
Wang
,
H.
, 2011
, “
Numerical Calculation and Experimental Research on Residual Stresses in Precipitation-Hardening Layer of NAK80 Steel for Shot Peening
,” Chin. J. Mech. Eng.
,
24
(03
), pp. 439
–445
.10.3901/CJME.2011.03.43938.
Xie
,
L.
,
Zhang
,
J.
,
Xiong
,
C.
,
Wu
,
L.
,
Jiang
,
C.
, and
Lu
,
W.
, 2012
, “
Investigation on Experiments and Numerical Modelling of the Residual Stress Distribution in Deformed Surface Layer of Ti–6Al–4V After Shot Peening
,” Mater. Des.
,
41
, pp. 314
–318
.10.1016/j.matdes.2012.05.02439.
Gao
,
W.
,
Liu
,
J.
,
Wang
,
Z.
, and
Shi
,
C.
, 2008
, “
Plastic Deformation Behavior of P92 Steel
,” J. Xi'an Technological Univ.
,
28
(4
), pp. 356
–359
.https://en.cnki.com.cn/Article_en/CJFDTotal-XAGY200804012.htm40.
Zhang
,
N.
,
Zhu
,
Z.
,
Xu
,
H.
,
Mao
,
X.
, and
Li
,
J.
, 2016
, “
Oxidation of Ferritic and Ferritic-Martensitic Steels in Flowing and Static Supercritical Water
,” Corros. Sci.
,
103
, pp. 124
–131
.10.1016/j.corsci.2015.10.01741.
Evans
,
H. E.
, 1995
, “
Stress Effects in High Temperature Oxidation of Metals
,” Int. Mater. Rev.
,
40
(1
), pp. 1
–40
.10.1179/imr.1995.40.1.142.
Martinelli
,
L.
, and
Balbaud-Célérier
,
F.
, 2011
, “
Modelling of the Oxide Scale Formation on Fe-Cr Steel During Exposure in Liquid Lead-Bismuth Eutectic in the 450-600 °C Temperature Range
,” Mater. Corros.
,
62
(6
), pp. 531
–542
.10.1002/maco.20100587143.
Buchanan
,
D. J.
, and
John
,
R.
, 2008
, “
Relaxation of Shot-Peening Residual Stresses Under Creep Loading
,” Scr. Mater.
,
59
(3
), pp. 286
–289
.10.1016/j.scriptamat.2008.03.02144.
Wright
,
I. G.
, and
Pint
,
B. A.
, 2002
, “
An Assessment of the High Temperature Oxidation Behavior of Fe-Cr Steels in Water Vapor and Steam
,” NACE CORROSION 2002, Agu Fall Meeting
,
145
(2
), pp. 137
–150
.https://onepetro.org/NACECORR/proceedings-abstract/CORR02/All-CORR02/NACE-02377/114723Copyright © 2022 by ASME
You do not currently have access to this content.
