Abstract

Several components of nuclear power plants are made of cast austenitic stainless steel (CASS) because of its high corrosion resistance and strength. The inservice inspection based on ultrasonic testing (UT) has to be conducted for CASS components in accordance with fitness-for-service codes such as the Japan Society of Mechanical Engineers Rules on Fitness-for-Service for Nuclear Power Plants. However, a high-accuracy evaluation of flaws in CASS components through UT is difficult because the ultrasonic waves are scattered and attenuated by coarse grains, and their beam is distorted by the anisotropy resulting from the grain orientations. Numerical simulations are useful and reasonable ways for better understanding the ultrasonic wave propagation behavior in CASS. To effectively achieve this, the simulation model should include a three-dimensional (3D) grain structure. If a casting simulation can predict the solidification structure in a CASS, the wave propagation could be simulated also for a more realistic situation. In this study, we predicted the solidification structure of statically CASS by using a cellular automaton (CA) coupled with the finite element method and fed this structure into an explicit finite element model (FEM) for simulating the propagation of waves emitted by angle beam probes. Afterward, these simulated wave propagations were compared with those measured by a 3D laser Doppler vibrometer (LDV), showing almost good agreement between predicted and experimental results.

References

1.
The Japan Society of Mechanical Engineers
,
2012
, “
Codes for Nuclear Power Generation Facilities, Rules on Fitness-for-Service for Nuclear Power Plants
,” The Japan Society of Mechanical Engineers, Shinjuku-ku, Tokyo, Japan, Standard No. JSME S NA1-2012 (in Japanese).
2.
Kurozumi
,
Y.
, and
Ishida
,
H.
,
2004
, “
Detection Sensitivity and Sizing Ability of Defects in Cast Stainless Steel With Newly Developed Automatic Ultrasonic Inspection System
,”
INSS J.
,
11
, pp.
182
197
(in Japanese).
3.
Sakamoto
,
K.
,
Furukawa
,
T.
,
Komura
,
I.
,
Kamiyama
,
Y.
, and
Mihara
,
T.
,
2012
, “
Research on Ultrasonic Inspection of Cast Austenitic Stainless Steel Piping
,”
ASME
Paper No. PVP2012-78051.10.1115/PVP2012-78051
4.
Lin
,
S.
, and
Shohji
,
H.
,
2016
, “
Effect of Refraction Angle on Detectability of Flaws in Centrifugally Cast Stainless Steel Inspected by Ultrasonic Phased Array Technology
,”
Proceedings of the 12th International Conference on Non Destructive Evaluation in Relation to Structural Integrity for Nuclear and Pressurized Components (12th ICNDE),
Dubrovnik, Croatia, Oct. 4–6, Paper No. WED.2.B.3.
5.
Lin
,
S.
, and
Shoji
,
H.
,
2018
, “
Development of Phased Array Ultrasonic Techniques for Centrifugally Cast Stainless Steel—Part 1: Proposal of Computation Method for Delay Law Taking Anisotropy in Consideration
,” CRIEPI Report Q17002 (in Japanese).
6.
Jenson
,
F.
,
Ganjehi
,
L.
,
Poidevin
,
C.
,
Cattiaux
,
G.
, and
Sollier
,
T.
,
2009
, “
Modelling of Ultrasonic Propagation in Cast Stainless Steels With Coarse Grained Structures
,”
Proceedings of the Seventh International Conference on Non Destructive Evaluation in Relation to Structural Integrity for Nuclear and Pressurized Components
(
7th ICNDE
), Yokohama, Japan, May 12–15, pp.
336
344
.https://www.ndt.net/search/docs.php3?id=8841
7.
Nageswaran
,
C.
,
Carpentier
,
C.
, and
Tse
,
Y. Y.
,
2009
, “
Microstructural Quantification, Modelling and Array Ultrasonics to Improve the Inspection of Austenitic Welds
,”
Insight
,
51
(
12
), pp.
1
7
.10.1784/insi.2009.51.12.660
8.
Gardahaut
,
A.
,
Lourme
,
H.
,
Mahaut
,
S.
,
Lin
,
S.
, and
Nagai
,
M.
,
2016
, “
Application of Advanced Ultrasonic Testing Methods to Dissimilar Metal Welds - Comparison of Simulated and Experimental Results
,”
Proceedings of the 12th International Conference on Non Destructive Evaluation in Relation to Structural Integrity for Nuclear and Pressurized Components (12th ICNDE)
, Dubrovnik, Croatia, Oct. 4–6, Paper No. TUE.2.B.3.
9.
Kobayashi
,
R.
,
1993
, “
Modeling and Numerical Simulations of Dendritic Crystal Growth
,”
Phys. D
,
63
(
3–4
), pp.
410
423
.10.1016/0167-2789(93)90120-P
10.
Moelans
,
N.
,
Blanpain
,
B.
, and
Wollants
,
P.
,
2008
, “
An Introduction to Phase-Field Modeling of Microstructure Evolution
,”
Calphad
,
32
(
2
), pp.
268
294
.10.1016/j.calphad.2007.11.003
11.
Steinbach
,
I.
,
2009
, “
Phase-Field Models in Materials Science
,”
Model. Simul. Mater. Sci. Eng.
,
17
(
7
), p.
073001
.10.1088/0965-0393/17/7/073001
12.
Spittle
,
J. A.
, and
Brown
,
S. G. R.
,
1989
, “
Computer Simulation of the Effects of Alloy Variables on the Grain Structures of Castings
,”
Acta Metall.
,
37
(
7
), pp.
1803
1810
.10.1016/0001-6160(89)90065-5
13.
Zhu
,
P.
, and
Smith
,
R. W.
,
1992
, “
Dynamic Simulation of Crystal Growth by Monte Carlo Method-II. Ingot Microstructures
,”
Acta Metall. Mater.
,
40
(
12
), pp.
3369
3379
.10.1016/0956-7151(92)90050-O
14.
Nogami
,
A.
,
Koseki
,
T.
, and
Fukuda
,
Y.
,
2003
, “
Simulation of Solidification Morphology Using Monte Carlo and Finite Difference Hybrid Modeling Incorporated With Computational Thermodynamics
,”
Mater. Jpn.
,
42
(
10
), pp.
731
737
(in Japanese).10.2320/materia.42.731
15.
Gandin
,
C. A.
, and
Rappaz
,
M.
,
1994
, “
A Couple Finite Element-Cellular Automaton Model for the Prediction of Dendritic Grain Structures in Solidification Processes
,”
Acta Metall. Mater.
,
42
(
7
), pp.
2233
2246
.10.1016/0956-7151(94)90302-6
16.
Gandin
,
C. A.
,
Desbiolles
,
J. L.
,
Rappaz
,
M.
, and
Thevoz
,
P.
,
1999
, “
A Three-Dimensional Cellular Automaton—Finite Element Model for the Prediction of Solidification Grain Structures
,”
Metall. Mater. Trans. A
,
30
(
12
), pp.
3153
3165
.10.1007/s11661-999-0226-2
17.
Natsume
,
Y.
, and
Ohsasa
,
K.
,
2006
, “
Prediction of Casting Structure in Aluminum-Base Multi-Component Alloys Using Heterogeneous Nucleation Parameter
,”
ISIJ Int.
,
46
(
6
), pp.
896
902
.10.2355/isijinternational.46.896
18.
Nakahata
,
K.
,
Sugahara
,
H.
,
Barth
,
M.
,
Kohler
,
B.
, and
Schubert
,
F.
,
2016
, “
Three Dimensional Image-Based Simulation of Ultrasonic Wave Propagation Pin Polycrystalline Metal Using Phase-Field Modeling
,”
Ultrasonics
,
67
, pp.
18
29
.10.1016/j.ultras.2015.12.013
19.
Nagai
,
M.
,
Lin
,
S.
, and
Nakahata
,
K.
,
2018
, “
Study on Three-Dimensional Simulation of Ultrasonic Wave Propagation in Statically Cast Stainless Steel Using Numerical Solidified Microstructure Model
,”
Trans. Jpn. Soc. Mech. Eng.
,
84
(
867
), pp.
18
00192
18-00192
(in Japanese).10.1299/transjsme.18-00192
20.
Kurz
,
W.
,
Giovanola
,
B.
, and
Trivedi
,
R.
,
1986
, “
Theory of Microstructural Development During Rapid Solidification
,”
Acta Metall. Mater.
,
34
(
5
), pp.
823
830
.10.1016/0001-6160(86)90056-8
21.
Cao
,
W.
,
Chen
,
S. L.
,
Zhang
,
F.
,
Wu
,
K.
,
Yang
,
Y.
,
Chang
,
Y. A.
,
Schmid-Fetzer
,
R.
, and
Oate
,
W. A.
,
2009
, “
PANDAT Software With PanEngine, PanOptimizer and PanPrecitation for Multi-Component Phase Diagram Calculation and Materials Property Simulation
,”
Calphad
,
33
(
2
), pp.
328
342
.10.1016/j.calphad.2008.08.004
22.
Ledbetter
,
H. M.
,
1981
, “
Predicted Single-Crystal Elastic Constants of Stainless-Steel 316
,”
Br. J. Non-Destr. Test.
,
23
(
6
), pp.
286
287
.https://inis.iaea.org/search/search.aspx?orig_q=RN:13653081
23.
Nakahata
,
K.
,
Tokunaga
,
J.
, and
Hirose
,
S.
,
2010
, “
Image-Based Simulation of Wave Propagation and Its Application to UT Modellings
,”
J. JSNDI
,
59
(
5
), pp.
231
238
(in Japanese).
You do not currently have access to this content.