A plate-bending formulation was developed from a three-dimensional solid. The plate element includes both transverse shear and normal deformations and the transverse gradient load (TGL) which is associated with the transverse normal deformation. The element utilizes reduced integration along the in-plane axes and full integration along the transverse axis. The formulation incorporates Gurson’s constitutive model for void growth and plastic deformation. An algorithm for stable solutions of the nonlinear constitutive equations is also discussed. Hourglass mode control is provided by adding a small fraction of internal force determined through full integration along the in-plane axes and reduced integration along the transverse axis. Numerical examples are presented for plastic deformation of a plate with fluid-structure interaction to examine the effects of void growth and nucleation in plastic deformation.
Skip Nav Destination
e-mail: ywkwon@me.nps.navy.mil
Article navigation
November 2001
Technical Papers
Effects of Void Growth and Nucleation on Plastic Deformation of Plates With Fluid-Structure Interaction
Y. W. Kwon, Fellow ASME,
e-mail: ywkwon@me.nps.navy.mil
Y. W. Kwon, Fellow ASME
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93943
Search for other works by this author on:
P. M. McDermott
P. M. McDermott
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93943
Search for other works by this author on:
Y. W. Kwon, Fellow ASME
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93943
e-mail: ywkwon@me.nps.navy.mil
P. M. McDermott
Department of Mechanical Engineering, Naval Postgraduate School, Monterey, CA 93943
Contributed by the Pressure Vessels and Piping Division for publication in the JOURNAL OF PRESSURE VESSEL TECHNOLOGY. Manuscript received by the PVP Division, October 31, 2000; revised manuscript received May 23, 2001. Associate Editor: Y. W. Kwon.
J. Pressure Vessel Technol. Nov 2001, 123(4): 480-485 (6 pages)
Published Online: May 23, 2001
Article history
Received:
October 31, 2000
Revised:
May 23, 2001
Citation
Kwon, Y. W., and McDermott, P. M. (May 23, 2001). "Effects of Void Growth and Nucleation on Plastic Deformation of Plates With Fluid-Structure Interaction ." ASME. J. Pressure Vessel Technol. November 2001; 123(4): 480–485. https://doi.org/10.1115/1.1400740
Download citation file:
Get Email Alerts
Cited By
Related Articles
Constitutive Modeling of Inelastic Solids for Plastic Flow Processes Under Cyclic Dynamic Loadings
J. Eng. Mater. Technol (April,1999)
Interfacial Stresses and Void Nucleation in Discontinuously Reinforced Composites
J. Eng. Mater. Technol (January,2000)
Fracture Nucleation in Single-Wall Carbon Nanotubes Under Tension: A Continuum Analysis Incorporating Interatomic Potentials
J. Appl. Mech (July,2002)
A Review of Full Eulerian Methods for Fluid Structure Interaction Problems
J. Appl. Mech (January,2012)
Related Proceedings Papers
Related Chapters
The Relation between Cold-Work-Induced Microstructural Evolution and the Postannealing Grain Structures in Zircaloy-4
Zirconium in the Nuclear Industry: 20th International Symposium
Linear Viscoelasticity
Introduction to Plastics Engineering
Models for Liquids
Introduction to Plastics Engineering