The use of oxidizing electrodes for wet welding of offshore structural steels, in spite of their low susceptibility to hydrogen HAZ cracking, is limited, in part, by the poor mechanical properties of their weld deposits. Low levels of carbon, manganese, and other deoxidizers, together with high oxygen contents seems to be one of the reasons for this low performance. This work investigated the influence of nickel additions on the tensile strength and impact resistance of wet welds deposited at 1.1 m of water depth. It was found that welds with nickel contents between 2 and 3 weight percent exhibited maximum toughness and tensile strength. Nickel additions also had a strong effect in reducing the grain size of equiaxed ferrite in the reheated region of underwater wet welds, thereby improving their mechanical properties. The drop of mechanical properties for nickel contents higher than 3 weight percent was associated with weld metal solidification cracking.

Issue Section:
Technical Briefs
Topics:
Mechanical properties, Nickel, Oxygen, Welded joints, Cracking (Materials), Fracture (Process), Tensile strength, Weight (Mass), Carbon, Electrodes, Ferrites (Magnetic materials), Fracture toughness, Grain size, Hydrogen, Metals, Ocean engineering, Solidification, Structural steel, Water, Welding
1.
Courtney, T. H., 1990, “Mechanical Behavior of Materials,” McGraw-Hill Pub. Co., New York, NY, P. 171.
2.
Dorschu, K. E., and Stout, R. D., 1961 “Some Factors Affecting the Notch Toughness of Steel Weld Metal,” Welding Journal, Mar., pp. 97s-105s.
3.
Evans
G. M.
,
1991
, “
The Effect of Nickel on the Microstructure and Properties of C-Mn All-Weld Metal Deposits
,”
Welding Research Abroad
, Vol.
XXXVII
, No.
2/3
, Feb./Mar., pp.
70
–
83
.
4.
Floreen
S.
,
Hayden
H. W.
, and
Devine
T. M.
,
1971
, “
Cleavage Initiation in Fe-Ni Alloys
,”
Metallurgical Transactions
, Vol.
2
, May, pp.
1403
–
1406
.
5.
Gooch, T. G., 1983a. “Properties of Underwater Welds. Part 1. Procedural Trials,” Metal Construction, Mar., pp. 164–167.
6.
Gooch, T. G., 1983b, “Properties of Underwater Welds. Part 2. Mechanical Properties,” Metal Construction, Apr., pp. 206–215.
7.
Grubbs, C. E., and Seth, O. W., 1977, “Underwater Wet Welding With Manual Arc Electrodes,” Underwater Welding for Offshore Installations, The Welding Institute, pp. 17–33.
8.
Hasui
A.
, and
Suga
Y.
,
1981
, “
On Cooling of Underwater Welds
,”
Welding Research Abroad
, Vol.
XXVII
, No.
3
, pp.
14
–
21
.
9.
Ibarra, S., Grubbs, C. E., and Olson, D. L., 1987, “The Nature of Reactions in Underwater Welding,” Paper OTC 5388, 19th Annual Offshore Technology Conference. Houston, TX, Apr., pp. 277–281.
10.
Kranzlein
H. H.
,
Burton
M. S.
, and
Smith
G. V.
,
1965
, “
Solid Solution Strengthening in Iron-Nickel and Iron-Platinum Alloys
,”
Transactions of the Metallurgical Society of AIME
; Vol.
233
, Jan., pp.
64
–
70
.
11.
Lancaster, J. F., 1993, Metallurgy of Welding, Fifth Edition, Chapman & Hall, p. 178.
12.
Ozaki, H., Naiman, J., and Masubuchi, K., 1977, “A Study of Hydrogen Cracking in Underwater Steel Welds,” Welding Journal, Aug., pp. 231s-237s.
13.
Pope, A. M., Liu, S., and Olson, D. L., 1994, “Effects of the Electrode Oxidizing Potential on Underwater Wet Welds,” 13th. International Conference on Offshore Mechanics and Arctic Engineering (OMAE), Houston, TX, February 28-March 3.
14.
Stalker, A. W., 1977, “Welding Institute Research on Underwater Welding,” Underwater Welding for Offshore Installations, The Welding Institute, pp. 63–74.
15.
Suga, Y., and Hasui, A., 1986, “On Formation of Porosity in Underwater Weld Metal,” IIW Doc. IX-1388-86; Apr.
This content is only available via PDF.
Copyright © 1996
 by The American Society of Mechanical Engineers
You do not currently have access to this content.