Abstract
Laser ultrasonics using guided waves excited by laser irradiation has attracted attention as an efficient nondestructive inspection method for carbon fiber-reinforced plastic (CFRP) composite laminates. In this article, to clarify the properties of laser-excited Lamb waves, we investigate the power flow of Lamb waves in an anisotropic CFRP laminate. The temperature rising caused by laser absorption is analytically calculated, and the derived thermal force is input to a finite element model to simulate the generation of Lamb waves. It is found that the power flow has an obvious directivity in a quasi-isotropic CFRP laminate. The power flow is smaller in the direction parallel to the carbon fibers of the surface layer and is larger in the perpendicular direction, but the maximum is in a slightly different direction; this result was validated by an experiment. Such directivity pattern is determined by two factors: the distribution of thermal force and the stacking sequence of CFRP laminates. Moreover, we investigate the different simulation models (metal-coated CFRP and cross-ply CFRP) to discuss the influence of each factor on the distribution of power flow separately.
