This paper presents a five-axis ball-end milling force model that is specifically tailored to microscale machining. A composite cutting force is generated by combining two force contributions from a shearing/ploughing slip-line (SL) field model and a quasi-static indentation (ID) model. To fully capture the features of microscale five-axis machining, a unique chip thickness algorithm based on the velocity kinematics of a ball-end mill is proposed. This formulation captures intricate tool trajectories as well as readily allows the integration of runout and elastic recovery effects. A workpiece updating algorithm has also been developed to identify tool–workpiece engagement. As a dual purpose, historical elastic recovery is stored locally on the meshed workpiece surface in vector form so that the directionality of elastic recovery is preserved for future time increments. The model has been validated through a comparison with five-axis end mill force data. Simulation results show reasonably accurate replication of end milling cutting forces with minimal experimental data fitting.
Force Modeling of Five-Axis Microball-End Milling
Contributed by the Manufacturing Engineering Division of ASME for publication in the JOURNAL OF MICRO- AND NANO-MANUFACTURING. Manuscript received February 19, 2015; final manuscript received May 29, 2015; published online July 7, 2015. Assoc. Editor: Sangkee Min.
- Views Icon Views
- Share Icon Share
- Search Site
Xu, C., Zhu, J., and Kapoor, S. G. (September 1, 2015). "Force Modeling of Five-Axis Microball-End Milling." ASME. J. Micro Nano-Manuf. September 2015; 3(3): 031007. https://doi.org/10.1115/1.4030767
Download citation file: