Graphical Abstract Figure
Abstract
Metamorphic mechanisms that can adapt to a variety of working conditions with distinct configurations, have gained widespread attention in recent years. However, it's always difficult to design metamorphic mechanisms with various motion branches. In this paper, the evolution design of a family of novel multiple metamorphic mechanisms is conducted by the inspiration from the concept of Assur group. Adopting some class II groups which are derived from the combination of three basic links, a novel 7R multiple metamorphic mechanism is first presented and analyzed. Kinematic analysis illustrates that the mechanism contains totally 11 motion branches including three types of effective joints, i.e., non-overconstrained 7R motion branches, overconstrained 6R motion branches, and planar 4R motion branches. Reconfiguration analysis of the mechanism is presented by the kinematic curves, and it shows that there are totally ten bifurcation points. Moreover, the transformations among all the motion branches are analyzed. Then, adopting different combinations of the elements, the evolution design of more 7R multiple metamorphic mechanisms is presented. This paper proposes a family of multiple metamorphic mechanisms which can achieve a large number of motion branches, and the construction process of the mechanisms in this paper provides a new reference for designing multiple metamorphic mechanisms.
References
1.
Dai
, J. S.
, and Gogu
, G.
, 2016
, “Special Issue on Reconfigurable Mechanisms: Morphing, Metamorphosis and Reconfiguration Through Constraint Variations and Reconfigurable Joints
,” Mech. Mach. Theory
, 96
, pp. 213
–214
. 2.
Nurahmi
, L.
, and Gan
, D.
, 2020
, “Reconfiguration of a 3-(RR)PS Metamorphic Parallel Mechanism Based on Complete Workspace and Operation Mode Analysis
,” ASME J. Mech. Rob.
, 12
(1
), p. 011002
. 3.
Fu
, J.
, and Gan
, D.
, 2021
, “A Reconfigurable Variable-Stiffness Parallel Beam for Compliant Robotic Mechanisms Towards Safe Human Interaction
,” Proceedings of ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference
, American Society of Mechanical Engineers (ASME)
, p. V08AT08A020
.4.
Dai
, J. S.
, and Jones
, J. R.
, 1999
, “Configuration Transformations in Metamorphic Mechanisms of Foldable/Erectable Kinds
,” Proceedings of 10th World Congress on the Theory of Machine and Mechanisms
, Oulu, Finland
, June 20–24
, pp. 542
–547
.5.
Lin
, Y.-H.
, Wang
, T.
, Spyrakos-Papastavridis
, E.
, Fu
, Z.
, Xu
, S.
, and Dai
, J. S.
, 2023
, “Minimum Friction Coefficient-Based Precision Manipulation Workspace Analysis of the Three-Fingered Metamorphic Hand
,” ASME J. Mech. Rob.
, 15
(5
), p. 011001
. 6.
Dai
, J. S.
, and Jones
, J. R.
, 1999
, “Mobility in Metamorphic Mechanisms of Foldable/Erectable Kinds
,” ASME J. Mech. Des.
, 121
(3
), pp. 375
–382
. 7.
Wohlhart
, K.
, 1996
, “Kinematotropic Linkages,” Recent Advances in Robot Kinematics
, J.
Lenarčič
and V.
Parenti-Castelli
, eds., Springer Netherlands
, Dordrecht, The Netherlands
, pp. 359
–368
.8.
Lee
, C. C.
, and Hervé
, J. M.
, 2005
, “Discontinuously Movable Seven-Link Mechanisms Via Group-Algebraic Approach
,” Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci.
, 219
(6
), pp. 577
–587
. 9.
Lee
, C. C.
, and Hervé
, J. M.
, 2016
, “Various Types of (RC)Under-Bar//(RC)Double-Under-Bar-Like Linkages and the Discontinuously Movable Koenigs Joint
,” Mech. Mach. Theory
, 96
, pp. 255
–268
. 10.
Yan
, H. S.
, and Liu
, N. T.
, 2003
, “Joint-Codes Representations for Mechanisms and Chains With Variable Topologies
,” Trans. Can. Soc. Mech. Eng.
, 27
(1–2
), pp. 131
–143
. 11.
Kong
, X. W.
, Gosselin
, C. M.
, and Richard
, P. L.
, 2007
, “Type Synthesis of Parallel Mechanisms With Multiple Operation Modes
,” ASME J. Mech. Des.
, 129
(6
), pp. 595
–601
. 12.
Kong
, X. W.
, and Jin
, Y.
, 2016
, “Type Synthesis of 3-DOF Multi-mode Translational/Spherical Parallel Mechanisms With Lockable Joints
,” Mech. Mach. Theory
, 96
, pp. 323
–333
. 13.
Gao
, X.
, Li
, F.
, Han
, X.
, Liu
, X.
, and Li
, S.
, 2023
, “Configuration Synthesis Method of Multi-mode Parallel Mechanism Based on Variable Mobility Branch
,” ASME J. Mech. Rob.
, 16
(6
), p. 061003
. 14.
Kong
, X. W.
, and Pfurner
, M.
, 2015
, “Type Synthesis and Reconfiguration Analysis of a Class of Variable-DOF Single-Loop Mechanisms
,” Mech. Mach. Theory
, 85
, pp. 116
–128
. 15.
Aimedee
, F.
, Gogu
, G.
, Dai
, J. S.
, Bouzgarrou
, C.
, and Bouton
, N.
, 2016
, “Systematization of Morphing in Reconfigurable Mechanisms
,” Mech. Mach. Theory
, 96
, pp. 215
–224
. 16.
You
, J. J.
, Xi
, F. F.
, Shen
, H. P.
, Wang
, J. Y.
, and Yang
, X. L.
, 2021
, “A Novel Stewart-Type Parallel Mechanism With Topological Reconfiguration: Design, Kinematics and Stiffness Evaluation
,” Mech. Mach. Theory
, 162
, p. 104329
. 17.
Thiruvengadam
, S.
, Tan
, J. S.
, and Miller
, K.
, 2021
, “A Generalised Quaternion and Clifford Algebra Based Mathematical Methodology to Effect Multi-stage Reassembling Transformations in Parallel Robots
,” Adv. Appl. Clifford Algebras
, 31
(3
), p. 39
. 18.
Thiruvengadam
, S.
, Tan
, J. S.
, and Miller
, K.
, 2021
, “Reassembling Transformations for Robot Manipulators Characterised Using Network Theoretic and Clifford-Algebraic Methods
,” Robotica
, 39
(5
), pp. 816
–841
. 19.
Teng
, X.
, Li
, Y.
, Liu
, Y.
, and Yao
, Y.-A.
, 2024
, “Design and Reconfiguration Analysis of the Trunk Mechanism for a Reconfigurable Wheeled Mobile Platform
,” ASME J. Mech. Rob.
, 16
(5
), p. 054505
. 20.
Müller
, A.
, and Li
, Z.
, 2024
, “Identification of Real and Complex Solution Varieties and Their Singularities Defined by Loop Constraints of Linkages Using the Kinematic Tangent Cone
,” ASME J. Mech. Rob.
, 16
(11
), p. 111003
. 21.
Feng
, H.
, Peng
, R.
, Ma
, J.
, and Chen
, Y.
, 2018
, “Rigid Foldability of Generalized Triangle Twist Origami Pattern and Its Derived 6R Linkages
,” ASME J. Mech. Rob.
, 10
(5
), p. 051003
. 22.
Wang
, C.
, Guo
, H.
, Liu
, R.
, and Deng
, Z.
, 2023
, “A Kirigami-Inspired Metamorphic Double-Loop Linkage With Multiple Single-Degree-of-Freedom Reconfiguration Branches
,” ASME J. Mech. Des.
, 145
(7
), p. 073301
. 23.
Jin
, L.
, Forte
, A. E.
, Deng
, B.
, Rafsanjani
, A.
, and Bertoldi
, K.
, 2020
, “Kirigami-Inspired Inflatables With Programmable Shapes
,” Adv. Mater.
, 32
(33
), p. 2001863
. 24.
Zhang
, K. T.
, and Dai
, J. S.
, 2014
, “A Kirigami-Inspired 8R Linkage and Its Evolved Overconstrained 6R Linkages With the Rotational Symmetry of Order Two
,” ASME J. Mech. Rob.
, 6
(2
), p. 021007
. 25.
Ma
, X. S.
, Zhang
, K. T.
, and Dai
, J. S.
, 2018
, “Novel Spherical-Planar and Bennett-Spherical 6R Metamorphic Linkages With Reconfigurable Motion Branches
,” Mech. Mach. Theory
, 128
, pp. 628
–647
. 26.
Wang
, R. Q.
, Song
, Y. Q.
, and Dai
, J. S.
, 2021
, “Reconfigurability of the Origami-Inspired Integrated 8R Kinematotropic Metamorphic Mechanism and Its Evolved 6R and 4R Mechanisms
,” Mech. Mach. Theory
, 161
, p. 104245
. 27.
Feng
, H. J.
, Chen
, Y.
, Dai
, J. S.
, and Gogu
, G.
, 2017
, “Kinematic Study of the General Plane-Symmetric Bricard Linkage and Its Bifurcation Variations
,” Mech. Mach. Theory
, 116
, pp. 89
–104
. 28.
Song
, C. Y.
, Chen
, Y.
, and Chen
, I. M.
, 2013
, “A 6R Linkage Reconfigurable Between the Line-Symmetric Bricard Linkage and the Bennett Linkage
,” Mech. Mach. Theory
, 70
, pp. 278
–292
. 29.
Waldron
, K. J.
, 1968
, “Hybrid Overconstrained Linkages
,” J. Mech.
, 3
(2
), pp. 73
–78
. 30.
Chai
, X. H.
, Kang
, X.
, Gan
, D. M.
, Yu
, H. Y.
, and Dai
, J. S.
, 2021
, “Six Novel 6R Metamorphic Mechanisms Induced From Three-Series-Connected Bennett Linkages That Vary Among Classical Linkages
,” Mech. Mach. Theory
, 156
, p. 104133
. 31.
Chai
, X. H.
, and Dai
, J. S.
, 2019
, “Three Novel Symmetric Waldron-Bricard Metamorphic and Reconfigurable Mechanisms and Their Isomerization
,” ASME J. Mech. Rob.
, 11
(5
), p. 051011
. 32.
Gao
, Y.
, Yang
, F.
, and Zhang
, J.
, 2022
, “A Reconfigurable 6R Linkage with Six Motion Modes and Three Topological Structures
,” ASME J. Mech. Rob.
, 15
(5
), p. 054503
. 33.
Zhang
, K. T.
, and Dai
, J. S.
, 2015
, “Screw-System-Variation Enabled Reconfiguration of the Bennett Plano-Spherical Hybrid Linkage and Its Evolved Parallel Mechanism
,” ASME J. Mech. Des.
, 137
(6
), p. 062303
. 34.
He
, X. Y.
, Kong
, X. W.
, Chablat
, D.
, Caro
, S.
, and Hao
, G. B.
, 2014
, “Kinematic Analysis of a Single-Loop Reconfigurable 7R Mechanism With Multiple Operation Modes
,” Robotica
, 32
(7
), pp. 1171
–1188
. 35.
Song
, Y. Q.
, Ma
, X. S.
, and Dai
, J. S.
, 2019
, “A Novel 6R Metamorphic Mechanism With Eight Motion Branches and Multiple Furcation Points
,” Mech. Mach. Theory
, 142
, p. 103598
. 36.
Kang
, X.
, Feng
, H. J.
, Dai
, J. S.
, and Yu
, H. Y.
, 2020
, “High-Order Based Revelation of Bifurcation of Novel Schatz-Inspired Metamorphic Mechanisms Using Screw Theory
,” Mech. Mach. Theory
, 152
, p. 103931
. 37.
Kang
, X.
, Ma
, X. S.
, Dai
, J. S.
, and Yu
, H. Y.
, 2020
, “Bifurcation Variations and Motion-Ruled-Surface Evolution of a Novel Schatz Linkage Induced Metamorphic Mechanism
,” Mech. Mach. Theory
, 150
, p. 103867
. 38.
Denavit
, J.
, and Hartenberg
, R.
, 1955
, “A Kinematic Notation for Lower-Pair Mechanisms Based on Matrices
,” ASME J. Appl. Mech.
, 22
, pp. 215
–221
. 39.
Mruthyunjaya
, T. S.
, 2003
, “Kinematic Structure of Mechanisms Revisited
,” Mech. Mach. Theory
, 38
(4
), pp. 279
–320
. 40.
Li
, S.
, and Dai
, J. S.
, 2012
, “Structure Synthesis of Single-Driven Metamorphic Mechanisms Based on the Augmented Assur Groups
,” ASME J. Mech. Rob.
, 4
(3
), p. 031004
. 41.
Bricard
, R.
, 1927
, Leçons de Cinématique, Tome II Cinématique Appliquée
, Gauthier-Villars
, Paris, France
.42.
Baker
, J. E.
, 1980
, “An Analysis of the Bricard Linkages
,” Mech. Mach. Theory
, 15
(4
), pp. 267
–286
. 43.
Gan
, W. W.
, and Pellegrino
, S.
, 2006
, “Numerical Approach to the Kinematic Analysis of Deployable Structures Forming a Closed Loop
,” Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci.
, 220
(7
), pp. 1045
–1056
. 
