Volume 140 Issue 11 | J. Mech. Des. | ASME Digital Collection

Topics: Design , Failure , Materials properties , Optimization , Probability , Reliability , Reliability-based optimization , Titanium , Uncertainty , Yield stress

An Inverse, Decision-Based Design Method for Integrated Design Exploration of Materials, Products, and Manufacturing Processes

Anand Balu Nellippallil, Vignesh Rangaraj, B. P. Gautham, Amarendra Kumar Singh, Janet K. Allen, Farrokh Mistree

J. Mech. Des. November 2018, 140(11): 111403. doi: https://doi.org/10.1115/1.4041050

Abstract

View articletitled, An Inverse, Decision-Based Design Method for Integrated Design Exploration of Materials, Products, and Manufacturing Processes

Open the PDF for in another window

Topics: Chain , Cooling , Design , Ferrites (Magnetic materials) , Manufacturing , Mechanical properties , Flow (Dynamics)

A Moving Morphable Component Based Topology Optimization Approach for Rib-Stiffened Structures Considering Buckling Constraints

Weisheng Zhang, Ying Liu, Zongliang Du, Yichao Zhu, Xu Guo

J. Mech. Des. November 2018, 140(11): 111404. doi: https://doi.org/10.1115/1.4041052

Abstract

View articletitled, A Moving Morphable Component Based Topology Optimization Approach for Rib-Stiffened Structures Considering Buckling Constraints

Open the PDF for in another window

Topics: Buckling , Design , Optimization , Stress , Topology , Finite element analysis , Geometry

Design of an Isotropic Metamaterial With Constant Stiffness and Zero Poisson's Ratio Over Large Deformations

A. Delissen, G. Radaelli, L. A. Shaw, J. B. Hopkins, J. L. Herder

J. Mech. Des. November 2018, 140(11): 111405. doi: https://doi.org/10.1115/1.4041170

Abstract

View articletitled, Design of an Isotropic Metamaterial With Constant Stiffness and Zero Poisson's Ratio Over Large Deformations

Open the PDF for in another window

Topics: Design , Springs , Poisson ratio , Stiffness , Displacement

Hip Implant Design With Three-Dimensional Porous Architecture of Optimized Graded Density

Yingjun Wang, Sajad Arabnejad, Michael Tanzer, Damiano Pasini

J. Mech. Des. November 2018, 140(11): 111406. doi: https://doi.org/10.1115/1.4041208

Abstract

View articletitled, Hip Implant Design With Three-Dimensional Porous Architecture of Optimized Graded Density

Open the PDF for in another window

Topics: Bone , Density , Design , Hip joint prostheses , Optimization , Stress , Topology , Failure , Elastic moduli , Porosity

A Structural Equation Modeling-Based Strategy for Design Optimization of Multilayer Composite Structural Systems

Junqi Yang, Hongyi Xu, Zhenfei Zhan, Ching-Hung Chuang

J. Mech. Des. November 2018, 140(11): 111407. doi: https://doi.org/10.1115/1.4040984

Abstract

View articletitled, A Structural Equation Modeling-Based Strategy for Design Optimization of Multilayer Composite Structural Systems

Open the PDF for in another window

Topics: Composite materials , Design , Optimization , Modeling

A Spectral Density Function Approach for Active Layer Design of Organic Photovoltaic Cells

Umar Farooq Ghumman, Akshay Iyer, Rabindra Dulal, Joydeep Munshi, Aaron Wang, TeYu Chien, Ganesh Balasubramanian, Wei Chen

J. Mech. Des. November 2018, 140(11): 111408. doi: https://doi.org/10.1115/1.4040912

Abstract

View articletitled, A Spectral Density Function Approach for Active Layer Design of Organic Photovoltaic Cells

Open the PDF for in another window

Topics: Design , Spectral energy distribution , Optimization , Electrons , Photovoltaic cells

Multi-Information Source Fusion and Optimization to Realize ICME: Application to Dual-Phase Materials

Seyede Fatemeh Ghoreishi, Abhilash Molkeri, Ankit Srivastava, Raymundo Arroyave, Douglas Allaire

J. Mech. Des. November 2018, 140(11): 111409. doi: https://doi.org/10.1115/1.4041034

Abstract

View articletitled, Multi-Information Source Fusion and Optimization to Realize ICME: Application to Dual-Phase Materials

Open the PDF for in another window

Topics: Design , Optimization , Finite element model , Work hardening

Computational Design of Gradient Paths in Additively Manufactured Functionally Graded Materials

Tanner Kirk, Edgar Galvan, Richard Malak, Raymundo Arroyave

J. Mech. Des. November 2018, 140(11): 111410. doi: https://doi.org/10.1115/1.4040816

Abstract

View articletitled, Computational Design of Gradient Paths in Additively Manufactured Functionally Graded Materials

Open the PDF for in another window

Topics: Additive manufacturing , Algorithms , Design , Functionally graded materials , Path planning , Temperature , Manufacturing

An Inverse Method for Optimizing Elastic Properties Considering Multiple Loading Conditions and Displacement Criteria

Danny Smyl

J. Mech. Des. November 2018, 140(11): 111411. doi: https://doi.org/10.1115/1.4040788

Abstract

View articletitled, An Inverse Method for Optimizing Elastic Properties Considering Multiple Loading Conditions and Displacement Criteria

Open the PDF for in another window

Topics: Design , Displacement , Elastic moduli , Inverse problems , Optimization , Elasticity , Structural elements (Construction) , Topology

Cluster-Based Optimization of Cellular Materials and Structures for Crashworthiness

Kai Liu, Duane Detwiler, Andres Tovar

J. Mech. Des. November 2018, 140(11): 111412. doi: https://doi.org/10.1115/1.4040960

Abstract

View articletitled, Cluster-Based Optimization of Cellular Materials and Structures for Crashworthiness

Open the PDF for in another window

Topics: Conceptual design , Design , Optimization , Crashworthiness

Thermal Performance Optimization in Electric Vehicle Power Trains by Locally Orthotropic Surface Layer Design

Mario Petrovic, Tsuyoshi Nomura, Takayuki Yamada, Kazuhiro Izui, Shinji Nishiwaki

J. Mech. Des. November 2018, 140(11): 111413. doi: https://doi.org/10.1115/1.4041220

Abstract

View articletitled, Thermal Performance Optimization in Electric Vehicle Power Trains by Locally Orthotropic Surface Layer Design

Open the PDF for in another window

Topics: Design , Optimization , Heat , Thermal conductivity , Trains , Electric vehicles

Homogenization of Mechanical Properties for Material Extrusion Periodic Lattice Structures Considering Joint Stiffening Effects

Sang-In Park, David W. Rosen

J. Mech. Des. November 2018, 140(11): 111414. doi: https://doi.org/10.1115/1.4040704

Abstract

View articletitled, Homogenization of Mechanical Properties for Material Extrusion Periodic Lattice Structures Considering Joint Stiffening Effects

Open the PDF for in another window

Topics: Displacement , Extruding , Mechanical properties , Stiffness , Struts (Engineering) , Yield strength , Errors , Elasticity , Elastic moduli , Diamonds

Design Exploration of Reliably Manufacturable Materials and Structures With Applications to Negative Stiffness Metamaterials and Microstereolithography

Clinton Morris, Logan Bekker, Michael R. Haberman, Carolyn C. Seepersad

J. Mech. Des. November 2018, 140(11): 111415. doi: https://doi.org/10.1115/1.4041251

Abstract

View articletitled, Design Exploration of Reliably Manufacturable Materials and Structures With Applications to Negative Stiffness Metamaterials and Microstereolithography

Open the PDF for in another window

Topics: Design , Manufacturing , Metamaterials , Stiffness

Microstructural Materials Design Via Deep Adversarial Learning Methodology

Zijiang Yang, Xiaolin Li, L. Catherine Brinson, Alok N. Choudhary, Wei Chen, Ankit Agrawal

J. Mech. Des. November 2018, 140(11): 111416. doi: https://doi.org/10.1115/1.4041371

Abstract

View articletitled, Microstructural Materials Design Via Deep Adversarial Learning Methodology

Open the PDF for in another window

Topics: Design , Optimization , Generators

Connecting Microstructures for Multiscale Topology Optimization With Connectivity Index Constraints

Zongliang Du, Xiao-Yi Zhou, Renato Picelli, H. Alicia Kim

J. Mech. Des. November 2018, 140(11): 111417. doi: https://doi.org/10.1115/1.4041176

Abstract

View articletitled, Connecting Microstructures for Multiscale Topology Optimization With Connectivity Index Constraints

Open the PDF for in another window

Topics: Optimization , Topology , Design

Design Innovation and Devices

Performance Prediction and Scaling Laws of Circular Dielectric Elastomer Membrane Actuators

Steffen Hau, Alexander York, Gianluca Rizzello, Stefan Seelecke

J. Mech. Des. November 2018, 140(11): 113501. doi: https://doi.org/10.1115/1.4039104

Abstract

View articletitled, Performance Prediction and Scaling Laws of Circular Dielectric Elastomer Membrane Actuators

Open the PDF for in another window

Topics: Actuators , Design , Displacement , Elastomers , Electrodes , Geometry , Membranes , Scaling laws (Mathematical physics) , Stress , Computation

Technical Brief

A Model for the Design of a Pomelo Peel Bioinspired Foam

Jonel Ortiz, Guanglu Zhang, Daniel A. McAdams

J. Mech. Des. November 2018, 140(11): 114501. doi: https://doi.org/10.1115/1.4040911

Abstract

View articletitled, A Model for the Design of a Pomelo Peel Bioinspired Foam

Open the PDF for in another window

Topics: Biomimetics , Compression , Design , Finite element analysis , Porosity , Aluminum , Modeling , Foams (Chemistry) , Finite element model

Guest Editorial

Special Issue: Design of Engineered Materials and Structures

Review Article

Interdisciplinary Research on Designing Engineering Material Systems: Results From a National Science Foundation Workshop

Research Papers

Design Automation

Topology Optimization of Structures Made of Discrete Geometric Components With Different Materials

Reliability-Based Design Optimization of Microstructures With Analytical Formulation

An Inverse, Decision-Based Design Method for Integrated Design Exploration of Materials, Products, and Manufacturing Processes

A Moving Morphable Component Based Topology Optimization Approach for Rib-Stiffened Structures Considering Buckling Constraints

Design of an Isotropic Metamaterial With Constant Stiffness and Zero Poisson's Ratio Over Large Deformations

Hip Implant Design With Three-Dimensional Porous Architecture of Optimized Graded Density

A Structural Equation Modeling-Based Strategy for Design Optimization of Multilayer Composite Structural Systems

A Spectral Density Function Approach for Active Layer Design of Organic Photovoltaic Cells

Multi-Information Source Fusion and Optimization to Realize ICME: Application to Dual-Phase Materials

Computational Design of Gradient Paths in Additively Manufactured Functionally Graded Materials

An Inverse Method for Optimizing Elastic Properties Considering Multiple Loading Conditions and Displacement Criteria

Cluster-Based Optimization of Cellular Materials and Structures for Crashworthiness

Thermal Performance Optimization in Electric Vehicle Power Trains by Locally Orthotropic Surface Layer Design

Homogenization of Mechanical Properties for Material Extrusion Periodic Lattice Structures Considering Joint Stiffening Effects

Design Exploration of Reliably Manufacturable Materials and Structures With Applications to Negative Stiffness Metamaterials and Microstereolithography

Microstructural Materials Design Via Deep Adversarial Learning Methodology

Connecting Microstructures for Multiscale Topology Optimization With Connectivity Index Constraints

Design Innovation and Devices

Performance Prediction and Scaling Laws of Circular Dielectric Elastomer Membrane Actuators

Technical Brief

A Model for the Design of a Pomelo Peel Bioinspired Foam

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Guest Editorial

Review Article

Research Papers

Design Automation

Design Innovation and Devices

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only