Skip Nav Destination
Issues
November 2015
ISSN 1050-0472
EISSN 1528-9001
Guest Editorial
Special Issue: Design for Additive Manufacturing: A Paradigm Shift in Design, Fabrication, and Qualification
J. Mech. Des. November 2015, 137(11): 110301.
doi: https://doi.org/10.1115/1.4031470
Topics:
Additive manufacturing
,
Design
,
Manufacturing
Papers
Part Design Methods and Specification Challenges in AM
Investigating the Role of Geometric Dimensioning and Tolerancing in Additive Manufacturing
J. Mech. Des. November 2015, 137(11): 111401.
doi: https://doi.org/10.1115/1.4031296
Level Set Topology Optimization of Printed Active Composites
J. Mech. Des. November 2015, 137(11): 111402.
doi: https://doi.org/10.1115/1.4030994
Topics:
Design
,
Optimization
,
Shapes
,
Topology
,
Deformation
,
Composite materials
Topology Optimization, Additive Layer Manufacturing, and Experimental Testing of an Air-Cooled Heat Sink
J. Mech. Des. November 2015, 137(11): 111403.
doi: https://doi.org/10.1115/1.4030989
Topics:
Design
,
Heat sinks
,
Manufacturing
,
Optimization
,
Topology
,
Convection
,
Computer-aided design
(Re)Designing for Part Consolidation: Understanding the Challenges of Metal Additive Manufacturing
John Schmelzle, Eric V. Kline, Corey J. Dickman, Edward W. Reutzel, Griffin Jones, Timothy W. Simpson
J. Mech. Des. November 2015, 137(11): 111404.
doi: https://doi.org/10.1115/1.4031156
Topics:
Design
,
Manifolds
,
Manufacturing
,
Metals
Multimaterial Design Methods for AM
A Generalized Optimality Criteria Method for Optimization of Additively Manufactured Multimaterial Lattice Structures
J. Mech. Des. November 2015, 137(11): 111405.
doi: https://doi.org/10.1115/1.4030995
Topics:
Optimization
,
Design
,
Displacement
An Investigation of Key Design for Additive Manufacturing Constraints in Multimaterial Three-Dimensional Printing
J. Mech. Des. November 2015, 137(11): 111406.
doi: https://doi.org/10.1115/1.4030991
Topics:
Design
,
Manufacturing
Design and Manufacturing Functionally Gradient Material Objects With an Off the Shelf Three-Dimensional Printer: Challenges and Solutions
J. Mech. Des. November 2015, 137(11): 111407.
doi: https://doi.org/10.1115/1.4031097
Topics:
Design
,
Functionally graded materials
,
Manufacturing
,
Optimization
,
Topology
,
Printing
A Multilevel Upscaling Method for Material Characterization of Additively Manufactured Part Under Uncertainties
J. Mech. Des. November 2015, 137(11): 111408.
doi: https://doi.org/10.1115/1.4031012
Design for Fiber-Reinforced Additive Manufacturing
J. Mech. Des. November 2015, 137(11): 111409.
doi: https://doi.org/10.1115/1.4030993
Topics:
Design
,
Fiber reinforced plastics
,
Fibers
,
Additive manufacturing
,
Engineering prototypes
,
Machinery
Process Planning Considerations for AM
Enhancing the Structural Performance of Additively Manufactured Objects Through Build Orientation Optimization
J. Mech. Des. November 2015, 137(11): 111410.
doi: https://doi.org/10.1115/1.4030998
Topics:
Additive manufacturing
,
Optimization
,
Design
,
Simulation
,
Anisotropy
,
Materials properties
,
Finite element analysis
,
Geometry
,
Stress
Build Direction Effects on Microchannel Tolerance and Surface Roughness
J. Mech. Des. November 2015, 137(11): 111411.
doi: https://doi.org/10.1115/1.4031071
Topics:
Design
,
Surface roughness
,
Microchannels
,
Computerized tomography
,
Shapes
Enhancement of Low-Cycle Fatigue Performance From Tailored Microstructures Enabled by Electron Beam Melting Additive Manufacturing Technology
J. Mech. Des. November 2015, 137(11): 111412.
doi: https://doi.org/10.1115/1.4031057
Topics:
Additive manufacturing
,
Cathode ray oscilloscopes
,
Cycles
,
Design
,
Electron beams
,
Fatigue
,
Fatigue testing
,
Low cycle fatigue
,
Manufacturing
,
Melting
Novel Applications of Design for AM
Four-Dimensional Printing for Freeform Surfaces: Design Optimization of Origami and Kirigami Structures
J. Mech. Des. November 2015, 137(11): 111413.
doi: https://doi.org/10.1115/1.4031023
Topics:
Algorithms
,
Design
,
Optimization
,
Shape optimization
,
Shapes
,
Approximation
,
Errors
,
Manufacturing
Design Framework for Multifunctional Additive Manufacturing: Placement and Routing of Three-Dimensional Printed Circuit Volumes
J. Mech. Des. November 2015, 137(11): 111414.
doi: https://doi.org/10.1115/1.4030996
Topics:
Circuits
,
Design
,
Additive manufacturing
The MechProcessor: Helping Novices Design Printable Mechanisms Across Different Printers
J. Mech. Des. November 2015, 137(11): 111415.
doi: https://doi.org/10.1115/1.4031089
Topics:
Design
,
Manufacturing
,
Machinery
,
Kinematics
,
Algorithms
Design for Additive Manufacture of Fine Medical Instrumentation—DragonFlex Case Study
J. Mech. Des. November 2015, 137(11): 111416.
doi: https://doi.org/10.1115/1.4030997
Topics:
Cables
,
Design
,
Engineering prototypes
,
Instrumentation
,
Printing
,
Manufacturing
,
Biomedicine
,
Biocompatibility
On Integration of Additive Manufacturing During the Design and Development of a Rehabilitation Robot: A Case Study
J. Mech. Des. November 2015, 137(11): 111417.
doi: https://doi.org/10.1115/1.4031123
Topics:
Design
,
Exoskeleton devices
,
Robots
,
Additive manufacturing
Patient-Specific Clavicle Reconstruction Using Digital Design and Additive Manufacturing
J. Mech. Des. November 2015, 137(11): 111418.
doi: https://doi.org/10.1115/1.4030992
Topics:
Bone
,
Design
,
Fracture (Materials)
,
Fracture (Process)
,
Plates (structures)
,
Screws
,
Surgery
,
Additive manufacturing
,
Manufacturing
Email alerts
RSS Feeds
Multi-Lattice Topology Optimization Via Generative Lattice Modeling
J. Mech. Des (May 2025)
Spatial Packaging and Routing Optimization of Complex Interacting Engineered Systems
J. Mech. Des (July 2025)
Design and Evaluation of Three-Phalange Underactuated Adaptive LSDH Finger
J. Mech. Des (July 2025)
A Customer Journey Mapping Approach With Mobile Application
J. Mech. Des (July 2025)
