Volume 124 Issue 4 | J. Mech. Des. | ASME Digital Collection

Topics: Algebra , Control theory , Differential equations , Equations of motion , Errors , Runge-Kutta methods , Stability , Simulation , Multibody dynamics

Kinematic Synthesis of a Six-Member Mechanism for Automotive Steering

S. Pramanik, Assistant Professor,

J. Mech. Des. December 2002, 124(4): 642–645. doi: https://doi.org/10.1115/1.1503372

Abstract

View articletitled, Kinematic Synthesis of a Six-Member Mechanism for Automotive Steering

Open the PDF for in another window

Topics: Kinematics , Wheels , Automobiles , Errors , Vehicles , Control equipment , Numerical analysis

Initial Estimates in the Design of Central-Lever Steering Linkages

P. A. Simionescu, M. R. Smith

J. Mech. Des. December 2002, 124(4): 646–651. doi: https://doi.org/10.1115/1.1505853

Abstract

View articletitled, Initial Estimates in the Design of Central-Lever Steering Linkages

Open the PDF for in another window

Topics: Design , Levers , Linkages , Wheels , Errors

Solving the Geometric Design Problem of Spatial 3R Robot Manipulators Using Polynomial Homotopy Continuation

Eric Lee, Graduate Student, Student Mem. ASME, Constantinos Mavroidis, Associate Professor, Mem. ASME

J. Mech. Des. December 2002, 124(4): 652–661. doi: https://doi.org/10.1115/1.1515796

Abstract

View articletitled, Solving the Geometric Design Problem of Spatial 3R Robot Manipulators Using Polynomial Homotopy Continuation

Open the PDF for in another window

Topics: Design , Manipulators , Polynomials , End effectors

A New Technique Based on Loops to Investigate Displacement Isomorphism in Planetary Gear Trains

V. V. N. R. Prasad Raju Pathapati, Professor, A. C. Rao, Principal

J. Mech. Des. December 2002, 124(4): 662–675. doi: https://doi.org/10.1115/1.1503373

Abstract

View articletitled, A New Technique Based on Loops to Investigate Displacement Isomorphism in Planetary Gear Trains

Open the PDF for in another window

Topics: Chain , Circuits , Displacement , Kinematics , Planetary gears , String , Trains

Design and Control of a Compliant Parallel Manipulator

Thomas G. Sugar, Vijay Kumar

J. Mech. Des. December 2002, 124(4): 676–683. doi: https://doi.org/10.1115/1.1517568

Abstract

View articletitled, Design and Control of a Compliant Parallel Manipulator

Open the PDF for in another window

Topics: Design , Manipulators , Stiffness , Springs

Geometric Insight Into the Dynamics of a Rigid Body Using the Spatial Triangle of Screws

Gordon R. Pennock, Associate Professor,, Patrick J. Meehan, Manufacturing Engineer,

J. Mech. Des. December 2002, 124(4): 684–689. doi: https://doi.org/10.1115/1.1500340

Abstract

View articletitled, Geometric Insight Into the Dynamics of a Rigid Body Using the Spatial Triangle of Screws

Open the PDF for in another window

Topics: Dynamics (Mechanics) , Momentum , Screws

Dynamic Response Analysis of Rotor-Bearing Systems With Cracked Shaft

M. A. Mohiuddin, Y. A. Khulief

J. Mech. Des. December 2002, 124(4): 690–696. doi: https://doi.org/10.1115/1.1423950

Abstract

View articletitled, Dynamic Response Analysis of Rotor-Bearing Systems With Cracked Shaft

Open the PDF for in another window

Topics: Bearings , Finite element analysis , Fracture (Materials) , Rotors , Equations of motion , Stiffness , Vibration

An Accurate Full Car Ride Model Using Model Reducing Techniques

Chul Kim, Paul I. Ro

J. Mech. Des. December 2002, 124(4): 697–705. doi: https://doi.org/10.1115/1.1503065

Abstract

View articletitled, An Accurate Full Car Ride Model Using Model Reducing Techniques

Open the PDF for in another window

Topics: Design , Suspension systems , Vehicles , Control equipment

Full Sliding Adhesive-Like Contact of V-Belts

Go¨ran Gerbert, Professor,, Francesco Sorge, Professor,

J. Mech. Des. December 2002, 124(4): 706–712. doi: https://doi.org/10.1115/1.1514662

Abstract

View articletitled, Full Sliding Adhesive-Like Contact of V-Belts

Open the PDF for in another window

Topics: Adhesives , Belts , Boundary-value problems , Pulleys , V-belts , Tension , Adhesion

Kinematic Creep in a Continuously Variable Transmission: Traction Drive Mechanics for Cobots

R. Brent Gillespie, Carl A. Moore, Michael Peshkin, J. Edward Colgate

J. Mech. Des. December 2002, 124(4): 713–722. doi: https://doi.org/10.1115/1.1517560

Abstract

View articletitled, Kinematic Creep in a Continuously Variable Transmission: Traction Drive Mechanics for Cobots

Open the PDF for in another window

Topics: Creep , Friction , Kinematics , Rollers , Rotation , Torque , Traction , Wheels , Stress

Enumeration of 1-DOF Planetary Gear Train Graphs Based on Functional Constraints

Jose M. del Castillo

J. Mech. Des. December 2002, 124(4): 723–732. doi: https://doi.org/10.1115/1.1514663

Abstract

View articletitled, Enumeration of 1-DOF Planetary Gear Train Graphs Based on Functional Constraints

Open the PDF for in another window

Topics: Gears , Planetary gears , Trains , Kinematics

On the Three Laws of Gearing

David B. Dooner

J. Mech. Des. December 2002, 124(4): 733–744. doi: https://doi.org/10.1115/1.1518501

Abstract

View articletitled, On the Three Laws of Gearing

Open the PDF for in another window

Topics: Displacement , Gear teeth , Gears , Geometry , Kinematics , Rotation , Generators

Design of One Stage Planetary Gear Train With Improved Conditions of Load Distribution and Reduced Transmission Errors

F. L. Litvin, D. Vecchiato, A. Demenego, E. Karedes, B. Hansen, R. Handschuh

J. Mech. Des. December 2002, 124(4): 745–752. doi: https://doi.org/10.1115/1.1515797

Abstract

View articletitled, Design of One Stage Planetary Gear Train With Improved Conditions of Load Distribution and Reduced Transmission Errors

Open the PDF for in another window

Topics: Errors , Gears , Planetary gears , Trains

Mathematical Models and Contact Simulations of Concave Beveloid Gears

Chia-Chang Liu, Assistant Professor, Chung-Biau Tsay, Professor, Mem. ASME

J. Mech. Des. December 2002, 124(4): 753–760. doi: https://doi.org/10.1115/1.1517563

Abstract

View articletitled, Mathematical Models and Contact Simulations of Concave Beveloid Gears

Open the PDF for in another window

Topics: Gears , Grinding , Simulation

Numerical Determination of Cutting Parameters for the Control of Klingelnberg Spiral Bevel Gear Geometry

Ma´rk Lelkes, Graduate Student, Ja´nos Ma´rialigeti, Professor, Daniel Play, Professor, Scientific Director

J. Mech. Des. December 2002, 124(4): 761–771. doi: https://doi.org/10.1115/1.1518502

Abstract

View articletitled, Numerical Determination of Cutting Parameters for the Control of Klingelnberg Spiral Bevel Gear Geometry

Open the PDF for in another window

Topics: Cutting , Errors , Gears , Geometry , Kinematics , Rotation , Spiral bevel gears , Machinery

About Hob Idle Distance in Gear Hobbing Operation

Stephen P. Radzevich, Mem. ASME

J. Mech. Des. December 2002, 124(4): 772–786. doi: https://doi.org/10.1115/1.1517561

Abstract

View articletitled, About Hob Idle Distance in Gear Hobbing Operation

Open the PDF for in another window

Topics: Gears , Machining

Computer Aided Design of Elliptical Gears

Biing-Wen Bair, Professor,

J. Mech. Des. December 2002, 124(4): 787–793. doi: https://doi.org/10.1115/1.1485092

Abstract

View articletitled, Computer Aided Design of Elliptical Gears

Open the PDF for in another window

Topics: Gears

The Influence of Gear Design Parameters on Gear Tooth Damage Detection Sensitivity

Lin Liu, Graduate Research Assistant, Darryll J. Pines, Associate Professor, Associate Fellow AIAA, AHS, ASME, IOP.

J. Mech. Des. December 2002, 124(4): 794–804. doi: https://doi.org/10.1115/1.1519275

Abstract

View articletitled, The Influence of Gear Design Parameters on Gear Tooth Damage Detection Sensitivity

Open the PDF for in another window

Topics: Damage , Design , Fracture (Materials) , Gear teeth , Gears , Pressure , Wear , Modeling , Errors , Failure

Surface Temperature Calculation and its Application to Surface Fatigue Strength Evaluation

Gang Deng, Tsutomu Nakanishi, Masana Kato

J. Mech. Des. December 2002, 124(4): 805–812. doi: https://doi.org/10.1115/1.1514659

Abstract

View articletitled, Surface Temperature Calculation and its Application to Surface Fatigue Strength Evaluation

Open the PDF for in another window

Topics: Temperature , Rollers , Stress

The VOF-G/FEV Model For Tracking a Polymer-Air Interface in the Injection Moulding Process

R. Ayad, A. Rigolot

J. Mech. Des. December 2002, 124(4): 813–821. doi: https://doi.org/10.1115/1.1515323

Abstract

View articletitled, The VOF-G/FEV Model For Tracking a Polymer-Air Interface in the Injection Moulding Process

Open the PDF for in another window

Topics: Cavities , Finite element analysis , Flow (Dynamics) , Polymers , Injection molding

Technical Brief

Design Modification for Reducing Silent Chain Annoying Noise

M. Pan, Assistant Professor,, T. Shieh, Senior Researcher,

J. Mech. Des. December 2002, 124(4): 822–827. doi: https://doi.org/10.1115/1.1485093

Abstract

View articletitled, Design Modification for Reducing Silent Chain Annoying Noise

Open the PDF for in another window

Topics: Chain , Noise (Sound) , Engines , Design

Erratum

Erratum: “Theoretical Stress Concentration Factors for Short Rectangular Plates With Centered Circular Holes” [ASME J. Mech. Des., 124, No. 1, pp. 126–128]

N. Troyani,, C. Gomes, and, G. Sterlacci

J. Mech. Des. December 2002, 124(4): 828. doi: https://doi.org/10.1115/1.1507761

Extract

View articletitled, Erratum: “Theoretical Stress Concentration Factors for Short Rectangular Plates With Centered Circular Holes” [ASME J. Mech. Des., 124, No. 1, pp. 126–128]

Open the PDF for in another window

Topics: Finite element analysis , Plates (structures) , Stress analysis (Engineering) , Stress concentration , Structural engineering , Tensile strength

Technical Papers

Decomposition-Based Assembly Synthesis Based on Structural Considerations

Design of Developable Surfaces Using Optimal Control

A New Mathematical Model for Geometric Tolerances as Applied to Round Faces

Integrated Real-Time Calibration of Electromagnetic Tracking of User Motions for Engineering Applications in Virtual Environments

Stabilization of Baumgarte’s Method Using the Runge-Kutta Approach

Kinematic Synthesis of a Six-Member Mechanism for Automotive Steering

Initial Estimates in the Design of Central-Lever Steering Linkages

Solving the Geometric Design Problem of Spatial 3R Robot Manipulators Using Polynomial Homotopy Continuation

A New Technique Based on Loops to Investigate Displacement Isomorphism in Planetary Gear Trains

Design and Control of a Compliant Parallel Manipulator

Geometric Insight Into the Dynamics of a Rigid Body Using the Spatial Triangle of Screws

Dynamic Response Analysis of Rotor-Bearing Systems With Cracked Shaft

An Accurate Full Car Ride Model Using Model Reducing Techniques

Full Sliding Adhesive-Like Contact of V-Belts

Kinematic Creep in a Continuously Variable Transmission: Traction Drive Mechanics for Cobots

Enumeration of 1-DOF Planetary Gear Train Graphs Based on Functional Constraints

On the Three Laws of Gearing

Design of One Stage Planetary Gear Train With Improved Conditions of Load Distribution and Reduced Transmission Errors

Mathematical Models and Contact Simulations of Concave Beveloid Gears

Numerical Determination of Cutting Parameters for the Control of Klingelnberg Spiral Bevel Gear Geometry

About Hob Idle Distance in Gear Hobbing Operation

Computer Aided Design of Elliptical Gears

The Influence of Gear Design Parameters on Gear Tooth Damage Detection Sensitivity

Surface Temperature Calculation and its Application to Surface Fatigue Strength Evaluation

The VOF-G/FEV Model For Tracking a Polymer-Air Interface in the Injection Moulding Process

Technical Brief

Design Modification for Reducing Silent Chain Annoying Noise

Erratum

Erratum: “Theoretical Stress Concentration Factors for Short Rectangular Plates With Centered Circular Holes” [ASME J. Mech. Des., 124, No. 1, pp. 126–128]

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Technical Brief

Erratum

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only