Skip Nav Destination
Issues
March 2000
ISSN 1050-0472
EISSN 1528-9001
In this Issue
Technical Papers
Editorial
J. Mech. Des. March 2000, 122(1): 1–2.
doi: https://doi.org/10.1115/1.533539
Topics:
Design engineering
,
Dynamics (Mechanics)
,
Kinematics
,
Machinery
,
Mechanical engineering
,
Robotics
,
Vibration
,
Engineering teachers
,
Motors
,
Acoustics
Solving the Inverse Dynamics of a Stewart-Gough Manipulator by the Principle of Virtual Work
J. Mech. Des. March 2000, 122(1): 3–9.
doi: https://doi.org/10.1115/1.533540
RCC Characteristics of Planar/Spherical Three Degree-of-Freedom Parallel Mechanisms With Joint Compliances
Whee-kuk Kim, Associate Professor,, Byung-Ju Yi, Associate Professor,, Whang Cho, Associate Professor,
J. Mech. Des. March 2000, 122(1): 10–16.
doi: https://doi.org/10.1115/1.533541
Topics:
Kinematics
,
Parallel mechanisms
,
Simulation
,
Degrees of freedom
,
Manipulators
Kinematic Analysis and Optimization of a New Three Degree-of-Freedom Spatial Parallel Manipulator
J. Mech. Des. March 2000, 122(1): 17–24.
doi: https://doi.org/10.1115/1.533542
Topics:
Displacement
,
Manipulators
,
Optimization
,
Design
,
Degrees of freedom
,
Actuators
,
Kinematic analysis
An Introduction to Burmester Field Theory
J. Mech. Des. March 2000, 122(1): 25–30.
doi: https://doi.org/10.1115/1.533553
Topics:
Design
,
Poles (Building)
Loop Based Detection of Isomorphism Among Chains, Inversions and Type of Freedom in Multi Degree of Freedom Chain
J. Mech. Des. March 2000, 122(1): 31–42.
doi: https://doi.org/10.1115/1.533543
Static Balancing of Spatial Parallel Platform Mechanisms—Revisited
J. Mech. Des. March 2000, 122(1): 43–51.
doi: https://doi.org/10.1115/1.533544
Topics:
Kinematics
,
Potential energy
,
Springs
,
Flight
,
Manipulators
,
Design
,
Center of mass
Crossable Surfaces of Robotic Manipulators With Joint Limits
J. Mech. Des. March 2000, 122(1): 52–60.
doi: https://doi.org/10.1115/1.533545
Topics:
Manipulators
,
End effectors
,
Geometry
Agent-Based Synthesis of Electromechanical Design Configurations
J. Mech. Des. March 2000, 122(1): 61–69.
doi: https://doi.org/10.1115/1.533546
Topics:
Design
Design of an Aircraft Brake Component Using an Interactive Multidisciplinary Design Optimization Framework
Marc A. Stelmack, Graduate Research Assistant, Stephen M. Batill, Associate Dean and Professor, Member ASME, Bryan C. Beck, Staff Engineer,
J. Mech. Des. March 2000, 122(1): 70–76.
doi: https://doi.org/10.1115/1.533554
Topics:
Aircraft
,
Brakes
,
Design
,
Optimization
,
Weight (Mass)
Computing Design Rationales by Interpreting Simulations
J. Mech. Des. March 2000, 122(1): 77–82.
doi: https://doi.org/10.1115/1.533547
Topics:
Design
,
Simulation
,
Engineering simulation
,
Friction
Calculation of the Stiffness Matrix of Angular Contact Ball Bearings by Using the Analytical Approach
J. Mech. Des. March 2000, 122(1): 83–90.
doi: https://doi.org/10.1115/1.533548
Topics:
Ball bearings
,
Bearings
,
Stiffness
,
Stress
,
Fatigue life
Design by Composition for Layered Manufacturing
J. Mech. Des. March 2000, 122(1): 91–101.
doi: https://doi.org/10.1115/1.533549
Topics:
Algorithms
,
Design
,
Manufacturing
An Extended Pattern Search Algorithm for Three-Dimensional Component Layout
J. Mech. Des. March 2000, 122(1): 102–108.
doi: https://doi.org/10.1115/1.533550
Topics:
Algorithms
,
Annealing
Simulation and Experimental Measurement of the Transmission Error of Real Hypoid Gears Under Load
Claude Gosselin, Professor, Thierry Guertin, Graduate Student, Didier Remond, Professor, Yves Jean, Research Engineer
J. Mech. Des. March 2000, 122(1): 109–122.
doi: https://doi.org/10.1115/1.533555
Topics:
Errors
,
Gears
,
Simulation
,
Bearings
,
Stress
Analytical Description of Meshing of Constant Pressure Angle Teeth Profiles on a Variable Radius Gear and its Applications
J. Mech. Des. March 2000, 122(1): 123–129.
doi: https://doi.org/10.1115/1.533551
Comparison of Torque Transmitting Shaft Connectivity Using a Trilobe Polygon Connection and an Involute Spline
J. Mech. Des. March 2000, 122(1): 130–135.
doi: https://doi.org/10.1115/1.533556
Topics:
Splines
,
Stress
,
Torque
,
Tension
,
Finite element analysis
Mathematical Model of Universal Hypoid Generator With Supplemental Kinematic Flank Correction Motions
J. Mech. Des. March 2000, 122(1): 136–142.
doi: https://doi.org/10.1115/1.533552
Topics:
Cutting
,
Generators
,
Kinematics
,
Machinery
,
Spiral bevel gears
,
Milling
,
Rotation
,
Computer programming
The Clemson Limit Stress Diagram for Ductile Parts Subjected to Positive Mean Fatigue Loading
Shyh-Jen Wang, Associate Research Scientist,, Marvin W. Dixon, Professor,, Cecil O. Huey,, Jr., Professor,, Su-Chen Chen, Associate Research Scientist,
J. Mech. Des. March 2000, 122(1): 143–146.
doi: https://doi.org/10.1115/1.533557
Topics:
Fatigue
,
Stress
,
Yield strength
,
Design
,
Fatigue failure
Book Review
Stiffness and Damping in Mechanical Design
J. Mech. Des. March 2000, 122(1): 147.
doi: https://doi.org/10.1115/1.533570
Topics:
Damping
,
Design engineering
,
Stiffness
Email alerts
RSS Feeds
Automated Layout Design of Hydraulic Components With Constraints on Flow Channels
J. Mech. Des (May 2025)