Solutions to the governing equations of a spur gear transmission model, developed in Part I, are presented. Factors affecting the dynamic load are identified. It is found that the dynamic load increases with operating speed up to a system natural frequency. At operating speeds beyond the natural frequency the dynamic load decreases dramatically. Also, it is found that the applied load and shaft inertia have little effect upon the dynamic load. Damping and friction decrease the dynamic load. Finally, tooth stiffness has a significant effect upon dynamic loading: the higher the stiffness, the lower the dynamic loading. Also, the higher the stiffness the higher the rotating speed required for peak dynamic response.
On Dynamic Loads in Parallel Shaft Transmissions: Part II—Parameter Study
- Views Icon Views
- Share Icon Share
- Search Site
Lin, H., Huston, R. L., and Coy, J. J. (June 1, 1988). "On Dynamic Loads in Parallel Shaft Transmissions: Part II—Parameter Study." ASME. J. Mech., Trans., and Automation. June 1988; 110(2): 226–229. https://doi.org/10.1115/1.3258930
Download citation file: