...Deepesh Yadav; Balila Nagamani Jaya 3D printing is a layer-by-layer deposition process, which results in highly anisotropic structures and contains interfaces. Complex shapes manufactured by 3D printing carry defects. Complete elimination of these defects and interfaces is not possible...

...-centered cubic and Schwarz-P). The phenomenological constitutive models produced in this study can be used in topology optimization to maximize the performance of 3D-printed FGLs components in terms of stiffness, strength, or energy absorption. Fig. 6 Schematics of the homogenization of lattices...

... woody biomass (maple, oak, and pine) in-house, and one sourced commercially. Filaments made from blends of 30 wt% and 40 wt% of the in-house lignin and the commercially sourced lignin as fillers in PLA were used to 3D-print experimental test samples using fused filament fabrication (FFF) process...

... 07 02 2019 11 02 2019 3D printing fatigue life constitutive modeling discontinuous yielding Advancements in additive manufacturing (AM) have led to a profound flexibility in the design and manufacturing of materials ranging from plastics to metals and composites, tailored...

...: Anastasia Muliana. 09 06 2018 17 10 2018 metallic lattices selective laser sintering 3D printing mechanical behavior maraging steel triply periodic minimal surfaces Strong lightweight cellular materials are gaining a lot of interest recently due to the progressive...