Skip Nav Destination
Issues
January 2008
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Research Papers
Notch Effect on Low Cycle Fatigue of Sn–3.5Ag Solder
J. Eng. Mater. Technol. January 2008, 130(1): 011001.
doi: https://doi.org/10.1115/1.2806237
Topics:
Crack propagation
,
Cycles
,
Failure
,
Fracture (Materials)
,
Low cycle fatigue
,
Solders
,
Tin
,
Stress concentration
,
Stress
,
Finite element analysis
Critical Depth of Cut and Specific Cutting Energy of a Microscribing Process for Hard and Brittle Materials
J. Eng. Mater. Technol. January 2008, 130(1): 011002.
doi: https://doi.org/10.1115/1.2806253
Topics:
Brittleness
,
Cutting
,
Sapphire
,
Deformation
,
Brittle fracture
,
Geometry
A Phenomenological Approach for Real-Time Simulation of the Two-Way Shape Memory Effect in NiTi Alloys
J. Eng. Mater. Technol. January 2008, 130(1): 011003.
doi: https://doi.org/10.1115/1.2806264
Accounting for High Stress Gradient by a Modified Weibull Failure Theory
J. Eng. Mater. Technol. January 2008, 130(1): 011004.
doi: https://doi.org/10.1115/1.2806251
Topics:
Failure
,
Stress
,
Weight (Mass)
Constitutive Behavior and Temperature Effects in NR and SBR Under Variable Amplitude and Multiaxial Loading Conditions
J. Eng. Mater. Technol. January 2008, 130(1): 011005.
doi: https://doi.org/10.1115/1.2806276
Topics:
Cycles
,
Stress
,
Temperature
,
Torsion
,
Rubber
,
Signals
,
Deformation
Influence of Ply Sequence and Thermoelastic Stress Field on Asymmetric Delamination Growth Behavior Emanating From Elliptical Holes in Laminated FRP Composites
J. Eng. Mater. Technol. January 2008, 130(1): 011006.
doi: https://doi.org/10.1115/1.2806277
Modeling Texture Evolution During Friction Stir Welding of Stainless Steel With Comparison to Experiments
J. Eng. Mater. Technol. January 2008, 130(1): 011007.
doi: https://doi.org/10.1115/1.2816902
Topics:
Friction
,
Texture (Materials)
,
Deformation
,
Thread
,
Stainless steel
Optical Microscopy-Aided Indentation Tests
J. Eng. Mater. Technol. January 2008, 130(1): 011008.
doi: https://doi.org/10.1115/1.2806252
Topics:
Algorithms
,
Bearings
,
Ceramics
,
Displacement
,
Edge detection
,
Finite element analysis
,
Finite element model
,
Microscopy
,
Optical microscopy
,
Plasticity
Nonlinear Analysis of a Thin Circular Functionally Graded Plate and Large Deflection Effects on the Forces and Moments
J. Eng. Mater. Technol. January 2008, 130(1): 011009.
doi: https://doi.org/10.1115/1.2806254
Technical Briefs
Modeling of the Rate Responsive Behavior of Elastomer Foam Materials
J. Eng. Mater. Technol. January 2008, 130(1): 014501.
doi: https://doi.org/10.1115/1.2807047
Topics:
Curve fitting
,
Elastomers
,
Foamed materials
,
Constitutive equations
,
Modeling
,
Stress-strain curves
Email alerts
RSS Feeds
Failure Analysis and Piezo-Resistance Response of Intralaminar Glass/Carbon Hybrid Composites Under Blast Loading Conditions
J. Eng. Mater. Technol (January 2025)
Active Constrained Layer Damping of Beams With Natural Fiber Reinforced Viscoelastic Composites
J. Eng. Mater. Technol (January 2025)
High-Temperature Fatigue of Additively Manufactured Inconel 718: A Short Review
J. Eng. Mater. Technol (January 2025)
Process-Induced History Effects on the Mechanical Behavior of Additively Manufactured IN718 Alloys
J. Eng. Mater. Technol (January 2025)
Comparison of Monte Carlo Tools for Displacement Calculations for Protons and Heavy Ions Irradiation on Iron and EUROFER97
J. Eng. Mater. Technol (October 2024)