Topics: Anisotropy , Elastic waves , Electromagnetic scattering , Finite element analysis , Grain boundaries , Pressure , Radiation scattering , Scattering (Physics) , Stress , Waves

Effects of Molybdenum Content and Heat Treatment on Mechanical and Tribological Properties of a Low-Carbon ${Stellite}^{®}$ Alloy

Ping Huang, Rong Liu, Xijia Wu, Matthew X. Yao

J. Eng. Mater. Technol. October 2007, 129(4): 523–529. doi: https://doi.org/10.1115/1.2744429

Abstract

View articletitled, Effects of Molybdenum Content and Heat Treatment on Mechanical and Tribological Properties of a Low-Carbon <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><msup><mi>Stellite</mi><mo>®</mo></msup></mrow></math> Alloy

Open the PDF for in another window

Topics: Alloys , Heat treating (Metalworking) , Molybdenum , Tribology , Carbon , Mechanical properties , Wear resistance , Wear

The Influence of Temperature on the Forming Behavior of Metal/Polymer Laminates in Sheet Metal Forming

M. Weiss, M. E. Dingle, B. F. Rolfe, P. D. Hodgson

J. Eng. Mater. Technol. October 2007, 129(4): 530–537. doi: https://doi.org/10.1115/1.2772329

Abstract

View articletitled, The Influence of Temperature on the Forming Behavior of Metal/Polymer Laminates in Sheet Metal Forming

Open the PDF for in another window

Topics: Laminates , Temperature , Polymers , Aluminum

An Experimental Determination of Optimum Processing Parameters for $Al ∕ SiC$ Metal Matrix Composites Made Using Ultrasonic Consolidation

Y. Yang, G. D. Janaki Ram, B. E. Stucker

J. Eng. Mater. Technol. October 2007, 129(4): 538–549. doi: https://doi.org/10.1115/1.2744431

Abstract

View articletitled, An Experimental Determination of Optimum Processing Parameters for <math xmlns="http://www.w3.org/1998/Math/MathML"><mrow xmlns=""><mi>Al</mi><mo>∕</mo><mi>SiC</mi></mrow></math> Metal Matrix Composites Made Using Ultrasonic Consolidation

Open the PDF for in another window

Topics: Fibers , Bond strength , Stress , Metal matrix composites , Testing , Temperature , Welding

Constitutive Modeling of Metals Based on the Evolution of the Strain-Hardening Rate

L. Durrenberger, J. R. Klepaczko, A. Rusinek

J. Eng. Mater. Technol. October 2007, 129(4): 550–558. doi: https://doi.org/10.1115/1.2772327

Abstract

View articletitled, Constitutive Modeling of Metals Based on the Evolution of the Strain-Hardening Rate

Open the PDF for in another window

Topics: Modeling , Stress , Work hardening , Steel , Flow (Dynamics) , Temperature

Initiation and Propagation of Stress-Assisted Corrosion (SAC) Cracks in Carbon Steel Boiler Tubes

Dong Yang, Preet M. Singh, Richard W. Neu

J. Eng. Mater. Technol. October 2007, 129(4): 559–566. doi: https://doi.org/10.1115/1.2772330

Abstract

View articletitled, Initiation and Propagation of Stress-Assisted Corrosion (SAC) Cracks in Carbon Steel Boiler Tubes

Open the PDF for in another window

Topics: Boilers , Carbon steel , Corrosion , Fracture (Materials) , Oxygen , Stress , Temperature , Water , Fracture (Process) , Boiler tubes

Effects of Strain Hardening and Initial Yield Strength on Machining-Induced Residual Stresses

Mohamed N.A. Nasr, E.-G. Ng, M. A. Elbestawi

J. Eng. Mater. Technol. October 2007, 129(4): 567–579. doi: https://doi.org/10.1115/1.2772338

Abstract

View articletitled, Effects of Strain Hardening and Initial Yield Strength on Machining-Induced Residual Stresses

Open the PDF for in another window

Topics: Cutting , Finite element analysis , Machining , Residual stresses , Work hardening , Yield strength , Temperature , Stress

On the Reference Length and Mode Mixity for a Bimaterial Interface

A. Agrawal, A. M. Karlsson

J. Eng. Mater. Technol. October 2007, 129(4): 580–587. doi: https://doi.org/10.1115/1.2772340

Abstract

View articletitled, On the Reference Length and Mode Mixity for a Bimaterial Interface

Open the PDF for in another window

Topics: Fracture (Materials) , Fracture toughness , Stress , Fracture (Process)

Chloride Content Effect on the Corrosion Fatigue Properties of Superduplex Stainless Steels

A. Gironès, M. Anglada, A. Mateo

J. Eng. Mater. Technol. October 2007, 129(4): 588–593. doi: https://doi.org/10.1115/1.2772325

Abstract

View articletitled, Chloride Content Effect on the Corrosion Fatigue Properties of Superduplex Stainless Steels

Open the PDF for in another window

Topics: Corrosion , Damage , Fatigue , Fracture (Materials) , Stainless steel , Rupture , Ferrites (Magnetic materials) , Bearings , Fatigue life , Fracture (Process)

Experimental Technique for Elevated Temperature Mode I Fatigue Crack Growth Testing of Ni-Base Metal Foils

L. Liu, J. W. Holmes

J. Eng. Mater. Technol. October 2007, 129(4): 594–602. doi: https://doi.org/10.1115/1.2772324

Abstract

View articletitled, Experimental Technique for Elevated Temperature Mode I Fatigue Crack Growth Testing of Ni-Base Metal Foils

Open the PDF for in another window

Topics: Fatigue cracks , Fracture (Materials) , Geometry , Stress , Temperature , Metal foil , Testing

Characterization of Elastoplastic Properties Based on Inverse Analysis and Finite Element Modeling of Two Separate Indenters

Chaiwut Gamonpilas, Esteban P. Busso

J. Eng. Mater. Technol. October 2007, 129(4): 603–608. doi: https://doi.org/10.1115/1.2744428

Abstract

View articletitled, Characterization of Elastoplastic Properties Based on Inverse Analysis and Finite Element Modeling of Two Separate Indenters

Open the PDF for in another window

Topics: Finite element analysis , Modeling , Stress , Displacement , Work hardening

Effect of Nozzle-Traveling Velocity on Oil Cavitation Jet Peening of Aluminum Alloy, AA 6063-T6

A. Sahaya Grinspan, R. Gnanamoorthy

J. Eng. Mater. Technol. October 2007, 129(4): 609–613. doi: https://doi.org/10.1115/1.2772339

Abstract

View articletitled, Effect of Nozzle-Traveling Velocity on Oil Cavitation Jet Peening of Aluminum Alloy, AA 6063-T6

Open the PDF for in another window

Topics: Aluminum alloys , Cavitation , Nozzles , Shot peening , Stress , Yield strength

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy

J. Eng. Mater. Technol (April 2025)

Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam

J. Eng. Mater. Technol (April 2025)

Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study

J. Eng. Mater. Technol (July 2025)

Tensile, Flexural, and Fatigue Responses of Lightweight Pumice-Reinforced Magnesium Composite: Experimentation Followed by an Analytical Modeling

J. Eng. Mater. Technol (July 2025)

Influence of Ultrasonic Surface Rolling on the Tensile and Fatigue Properties of Laser-Cladding-Repaired 300M Steel Components

J. Eng. Mater. Technol (April 2025)

Technical Papers

Characterization of the Core Properties of a Shock Absorbing Composite

Effect of Strain Rate on the Dynamic Hardness in Metals

Modeling of Elastic Waves in Dynamically Loaded $NiAl$ Bicrystals

Effects of Molybdenum Content and Heat Treatment on Mechanical and Tribological Properties of a Low-Carbon ${Stellite}^{®}$ Alloy

The Influence of Temperature on the Forming Behavior of Metal/Polymer Laminates in Sheet Metal Forming

An Experimental Determination of Optimum Processing Parameters for $Al ∕ SiC$ Metal Matrix Composites Made Using Ultrasonic Consolidation

Constitutive Modeling of Metals Based on the Evolution of the Strain-Hardening Rate

Initiation and Propagation of Stress-Assisted Corrosion (SAC) Cracks in Carbon Steel Boiler Tubes

Effects of Strain Hardening and Initial Yield Strength on Machining-Induced Residual Stresses

On the Reference Length and Mode Mixity for a Bimaterial Interface

Chloride Content Effect on the Corrosion Fatigue Properties of Superduplex Stainless Steels

Experimental Technique for Elevated Temperature Mode I Fatigue Crack Growth Testing of Ni-Base Metal Foils

Characterization of Elastoplastic Properties Based on Inverse Analysis and Finite Element Modeling of Two Separate Indenters

Effect of Nozzle-Traveling Velocity on Oil Cavitation Jet Peening of Aluminum Alloy, AA 6063-T6

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only