Skip Nav Destination
Issues
April 2007
ISSN 0094-4289
EISSN 1528-8889
In this Issue
2006 NADAI Award Paper
A Comprehensive Theory of Yielding and Failure for Isotropic Materials
J. Eng. Mater. Technol. April 2007, 129(2): 173–181.
doi: https://doi.org/10.1115/1.2712847
Topics:
Brittleness
,
Failure
,
Stress
,
Deformation
Technical Papers
An Approach for Fatigue Life Prediction
J. Eng. Mater. Technol. April 2007, 129(2): 182–189.
doi: https://doi.org/10.1115/1.2400260
Topics:
Fatigue
,
Fatigue damage
,
Fatigue life
,
Fracture (Materials)
,
Stress
,
Stress analysis (Engineering)
,
Cycles
Fracture Characterization of Woven Fabric Reinforced Thermoplastic Composites
J. Eng. Mater. Technol. April 2007, 129(2): 190–193.
doi: https://doi.org/10.1115/1.2400277
Microwave Synthesis and Characterization of Magnesium Based Composites Containing Nanosized SiC and Hybrid Reinforcements
J. Eng. Mater. Technol. April 2007, 129(2): 194–199.
doi: https://doi.org/10.1115/1.2400279
Topics:
Composite materials
,
Magnesium (Metal)
,
Microwaves
,
Thermal expansion
,
Particulate matter
,
Porosity
,
Extruding
,
Sintering
,
Powder metallurgy
,
Ductility
Determining Equi-Biaxial Residual Stress and Mechanical Properties From the Force-Displacement Curves of Conical Microindentation
J. Eng. Mater. Technol. April 2007, 129(2): 200–206.
doi: https://doi.org/10.1115/1.2400280
Topics:
Finite element analysis
,
Stress
,
Yield strength
,
Mechanical properties
,
Displacement
,
Errors
,
Stiffness
,
Elastic moduli
Optimization of Thermomechanical Loading by the Inverse Method
J. Eng. Mater. Technol. April 2007, 129(2): 207–210.
doi: https://doi.org/10.1115/1.2400255
Topics:
Casting
,
Coating processes
,
Coatings
,
Cooling
,
Finite element analysis
,
Finite element methods
,
Optimization
,
Pyrometers
,
Quenching (Metalworking)
,
Rollers
Average Strain in Fiber Bundles and Its Effect on NCF Composite Stiffness
J. Eng. Mater. Technol. April 2007, 129(2): 211–219.
doi: https://doi.org/10.1115/1.2400266
Topics:
Composite materials
,
Stiffness
,
Fibers
Low-Velocity Impact Response Characterization of a Hybrid Titanium Composite Laminate
J. Eng. Mater. Technol. April 2007, 129(2): 220–226.
doi: https://doi.org/10.1115/1.2400272
Topics:
Buckling
,
Composite materials
,
Failure
,
Fracture (Materials)
,
Fracture (Process)
,
Laminates
,
Titanium
,
Failure mechanisms
,
Displacement
,
Brittleness
Residual Stress Solution Extrapolation for the Slitting Method Using Equilibrium Constraints
J. Eng. Mater. Technol. April 2007, 129(2): 227–232.
doi: https://doi.org/10.1115/1.2400281
Topics:
Equilibrium (Physics)
,
Stress
,
Residual stresses
Optimization of Material Properties and Process Parameters for Tube Hydroforming of Aluminum Extrusions
J. Eng. Mater. Technol. April 2007, 129(2): 233–241.
doi: https://doi.org/10.1115/1.2400259
Topics:
Ductility
,
Heat treating (Metalworking)
,
Optimization
,
Stress
,
Hardening
,
Aluminum alloys
,
Materials properties
,
Pressure
,
Heat
,
Aluminum extrusions
Capability of a Feed-Forward Artificial Neural Network to Predict the Constitutive Flow Behavior of As Cast 304 Stainless Steel Under Hot Deformation
J. Eng. Mater. Technol. April 2007, 129(2): 242–247.
doi: https://doi.org/10.1115/1.2400276
Topics:
Algorithms
,
Artificial neural networks
,
Deformation
,
Feedforward control
,
Flow (Dynamics)
,
Stainless steel
,
Stress
,
Temperature
Behavior of Nonhomogeneous Materials Subjected to Bearing Load
J. Eng. Mater. Technol. April 2007, 129(2): 248–254.
doi: https://doi.org/10.1115/1.2400278
Topics:
Stress
,
Finite element analysis
Pressure Sensitive Nonassociative Plasticity Model for DRA Composites
J. Eng. Mater. Technol. April 2007, 129(2): 255–264.
doi: https://doi.org/10.1115/1.2400273
Topics:
Algorithms
,
Composite materials
,
Flow (Dynamics)
,
Hardening
,
Plasticity
,
Pressure
,
Stiffness
,
Stress
,
Tensors
,
Compression
Weld Distortion Control During Welding Process With Reverse-Side Heating
J. Eng. Mater. Technol. April 2007, 129(2): 265–270.
doi: https://doi.org/10.1115/1.2400275
Topics:
Heating
,
Welding
,
Heat
,
Gas metal arc welding
,
Welded joints
,
Finite element analysis
Development and Validation of Novel FE Models for 3D Analysis of Peening of Strain-Rate Sensitive Materials
J. Eng. Mater. Technol. April 2007, 129(2): 271–283.
doi: https://doi.org/10.1115/1.2712469
Topics:
Finite element analysis
,
Finite element model
,
Residual stresses
,
Shot peening
,
Stress
,
Drilling
,
Modeling
A New Method Developed for Brittle and Ductile Materials to Evaluate Mechanical Properties of a Lump Specimen in the Use of Indentation Test
J. Eng. Mater. Technol. April 2007, 129(2): 284–292.
doi: https://doi.org/10.1115/1.2712465
Topics:
Brittleness
,
Deformation
,
Mechanical properties
,
Stress
,
Yield strength
,
Young's modulus
A Mathematical Model for Competing Failure Modes in Strain Cycle Fatigue
J. Eng. Mater. Technol. April 2007, 129(2): 293–303.
doi: https://doi.org/10.1115/1.2712468
Effects of Platelet Size and Mean Volume Fraction on Platelet Orientation and Volume Fraction Distributions in Functionally Graded Material Fabricated by a Centrifugal Solid-Particle Method
J. Eng. Mater. Technol. April 2007, 129(2): 304–312.
doi: https://doi.org/10.1115/1.2712467
Topics:
Functionally graded materials
,
Particulate matter
,
Platelets
Four Phase Model: A New Formulation to Predict the Effective Elastic Moduli of Composites
J. Eng. Mater. Technol. April 2007, 129(2): 313–320.
doi: https://doi.org/10.1115/1.2712472
Topics:
Composite materials
,
Elastic moduli
,
Tensors
,
Elasticity
Evidence of Ductile Tearing Ahead of the Cutting Tool and Modeling the Energy Consumed in Material Separation in Micro-Cutting
J. Eng. Mater. Technol. April 2007, 129(2): 321–331.
doi: https://doi.org/10.1115/1.2712471
Topics:
Cutting
,
Cutting tools
,
Ductile fracture
,
Separation (Technology)
,
Stress
,
Damage
,
Copper
,
Fracture (Materials)
,
Computer simulation
,
Finite element model
On Serrated Plastic Flow in an AA5052-H32 Sheet
J. Eng. Mater. Technol. April 2007, 129(2): 332–341.
doi: https://doi.org/10.1115/1.2712466
Topics:
Deformation
,
Polishing
,
Stress
,
Nucleation (Physics)
,
Flow (Dynamics)
,
Machinery
,
Relaxation (Physics)
Technical Brief
Manufacturing Aspects Relating to the Effects of Direct Current on the Tensile Properties of Metals
J. Eng. Mater. Technol. April 2007, 129(2): 342–347.
doi: https://doi.org/10.1115/1.2712470
Topics:
Aluminum
,
Brass (Metal)
,
Elastic moduli
,
Metals
,
Stress
,
Deformation
,
Manufacturing
,
Tensile strength
,
Temperature
,
Flow (Dynamics)
Email alerts
RSS Feeds
Modeling Growth and Viscous Flow of Oxide on Cylindrical Silicon Surfaces Including Piezoviscous Inhibition
J. Eng. Mater. Technol (April 2025)
Thermal Conductivity of 3D-Printed Metal Using Extrusion-Based Metal Additive Manufacturing Process
J. Eng. Mater. Technol (April 2025)