Skip Nav Destination
Issues
A New Analytical Approach for Hole Drilling Residual Stress Analysis by Full Field Method
J. Eng. Mater. Technol. April 2005, 127(2): 165–169.
doi: https://doi.org/10.1115/1.1839211
Topics:
Algorithms
,
Drilling
,
Stress
,
Stress analysis (Engineering)
,
Displacement
,
Noise (Sound)
,
Calibration
,
Interferometry
Relaxation of Peening Residual Stresses Due to Cyclic Thermo-Mechanical Overload
J. Eng. Mater. Technol. April 2005, 127(2): 170–178.
doi: https://doi.org/10.1115/1.1867986
Topics:
Relaxation (Physics)
,
Residual stresses
,
Shot peening
,
Stress
,
Thermomechanics
,
Modeling
,
Finite element analysis
Formability and Weld Zone Analysis of Tailor-Welded Blanks for Various Thickness Ratios
J. Eng. Mater. Technol. April 2005, 127(2): 179–185.
doi: https://doi.org/10.1115/1.1857936
Topics:
Base metals
,
Blanks
,
Butt welding
,
Failure
,
Failure mechanisms
,
Forming limit diagrams
,
Microhardness
,
Tensile testing
,
Steel sheet
,
Tensile strength
Mathematical Modeling of Ultra-High-Pressure Waterjet Peening
J. Eng. Mater. Technol. April 2005, 127(2): 186–191.
doi: https://doi.org/10.1115/1.1857934
Topics:
Modeling
,
Nozzles
,
Pressure
,
Shot peening
,
High cycle fatigue
,
Fatigue testing
,
Fatigue life
,
High pressure (Physics)
A New Quantitative Sensitivity Analysis of the Flow Stress of 18 Engineering Materials in Machining
J. Eng. Mater. Technol. April 2005, 127(2): 192–196.
doi: https://doi.org/10.1115/1.1857935
Topics:
Flow (Dynamics)
,
Machining
,
Sensitivity analysis
,
Stress
,
Temperature
,
Work hardening
,
Constitutive equations
,
Aluminum alloys
,
Carbon steel
Mechanical Properties of KM2 Single Fiber
J. Eng. Mater. Technol. April 2005, 127(2): 197–203.
doi: https://doi.org/10.1115/1.1857937
Topics:
Fibers
,
Stress
,
Deformation
Effects of Inclusions and Microstructures on Impact Energy of High Heat-Input Submerged-Arc-Weld Metals
J. Eng. Mater. Technol. April 2005, 127(2): 204–213.
doi: https://doi.org/10.1115/1.1857933
Topics:
Ferrites (Magnetic materials)
,
Fracture toughness
,
Heat
,
Metals
,
Nucleation (Physics)
,
Density
,
Grain size
Mesodamage Evolution in Polycrystals
J. Eng. Mater. Technol. April 2005, 127(2): 214–221.
doi: https://doi.org/10.1115/1.1857939
Topics:
Damage
,
Fatigue
,
Fatigue life
,
Modeling
,
Stress
,
Hardening
,
Deformation
,
Plasticity
Multiscale Model to Study the Effect of Interfaces in Carbon Nanotube-Based Composites
J. Eng. Mater. Technol. April 2005, 127(2): 222–232.
doi: https://doi.org/10.1115/1.1857940
Topics:
Carbon nanotubes
,
Composite materials
,
Displacement
,
Fibers
,
Nanotubes
,
Simulation
,
Stiffness
,
Stress
,
Traction
,
Nanoscale phenomena
Numerical Analysis of Electrodeposited Nickel Coating in Multistage Drawing Processes
J. Eng. Mater. Technol. April 2005, 127(2): 233–243.
doi: https://doi.org/10.1115/1.1865184
Topics:
Coating processes
,
Coatings
,
Nickel
,
Stress
,
Deformation
,
Finite element analysis
,
Simulation
Experimental and Numerical Evaluation of Crack Arresting Capability Due to a Dimple
J. Eng. Mater. Technol. April 2005, 127(2): 244–250.
doi: https://doi.org/10.1115/1.1865185
Topics:
Fracture (Materials)
,
Stress
,
Fatigue life
Deformation Behavior of Cold Upset Forming of Sintered Al-Fe Composite Preforms
J. Eng. Mater. Technol. April 2005, 127(2): 251–256.
doi: https://doi.org/10.1115/1.1867984
Topics:
Composite materials
,
Deformation
,
Density
,
Iron
,
Poisson ratio
,
Preforms
,
Stress
,
Compacting
,
Sintering
Using Embossing to Create a Fiber Reinforced Honeycomb Composite
J. Eng. Mater. Technol. April 2005, 127(2): 257–262.
doi: https://doi.org/10.1115/1.1867985
Topics:
Composite materials
,
Embossing
,
Fibers
,
Honeycomb structures
,
Laminates
,
Fracture toughness
,
Temperature
,
Carbon fibers
Email alerts
RSS Feeds
Investigations on Formability Enhancement of Friction Stir Tailor Welded Blanks
J. Eng. Mater. Technol
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)