Skip Nav Destination
Issues
April 2004
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Technical Papers
In-Plane Stiffness and Yield Strength of Periodic Metal Honeycombs
J. Eng. Mater. Technol. April 2004, 126(2): 137–156.
doi: https://doi.org/10.1115/1.1646165
Topics:
Honeycomb structures
,
Yield strength
,
Compression
,
Shear (Mechanics)
An Assessment of In-Service Stress Relaxation of a Work-Hardened Aluminum Magnesium Alloy
J. Eng. Mater. Technol. April 2004, 126(2): 157–163.
doi: https://doi.org/10.1115/1.1647128
Topics:
Relaxation (Physics)
,
Stress
,
Constitutive equations
,
Deformation
A Study of Inhomogeneous Plastic Deformation of 1045 Steel
J. Eng. Mater. Technol. April 2004, 126(2): 164–171.
doi: https://doi.org/10.1115/1.1647125
Topics:
Deformation
,
Dislocations
,
Steel
,
Stress
,
Cycles
,
Tension
,
Yield stress
Predicting the Effects of Overloads on Fatigue Crack Growth in an Al-SiC MMC Using a Computational Model
J. Eng. Mater. Technol. April 2004, 126(2): 172–178.
doi: https://doi.org/10.1115/1.1647126
Topics:
Fatigue cracks
,
Fracture (Materials)
,
Stress
,
Modeling
,
Fatigue
Micromechanical Simulation of Dynamic Fracture Using the Cohesive Finite Element Method
J. Eng. Mater. Technol. April 2004, 126(2): 179–191.
doi: https://doi.org/10.1115/1.1647127
Topics:
Fracture (Materials)
,
Damage
On the Characterization of Fatigue Crack Growth in a Plate With a Single-Sided Repair
J. Eng. Mater. Technol. April 2004, 126(2): 192–198.
doi: https://doi.org/10.1115/1.1647129
Topics:
Fatigue cracks
,
Fracture (Materials)
,
Maintenance
,
Stress
Fatigue Crack Initiation Behavior of Welded AA5083 in a Seawater Environment
J. Eng. Mater. Technol. April 2004, 126(2): 199–203.
doi: https://doi.org/10.1115/1.1651098
Topics:
Fracture (Materials)
,
Seawater
,
Fatigue cracks
,
Aluminum alloys
,
Fatigue limit
Influence of Carbon Content in Cobalt-Based Superalloys on Mechanical and Wear Properties
J. Eng. Mater. Technol. April 2004, 126(2): 204–212.
doi: https://doi.org/10.1115/1.1651096
Topics:
Alloys
,
Carbon
,
Cobalt
,
Differential scanning calorimetry
,
Fatigue
,
Fracture (Materials)
,
Fracture (Process)
,
Superalloys
,
Wear
,
Wear resistance
Dynamic Compressive Behavior of EPDM Rubber Under Nearly Uniaxial Strain Conditions
J. Eng. Mater. Technol. April 2004, 126(2): 213–217.
doi: https://doi.org/10.1115/1.1651097
Topics:
EPDM rubber
,
Stress
,
Stress-strain curves
,
Rubber
Email alerts
RSS Feeds
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Influence of Ultrasonic Surface Rolling on the Tensile and Fatigue Properties of Laser-Cladding-Repaired 300M Steel Components
J. Eng. Mater. Technol (April 2025)
