Skip Nav Destination
Issues
April 2000
ISSN 0094-4289
EISSN 1528-8889
In this Issue
Technical Papers
Predictive Modeling of the Nonuniform Deformation of the Aluminum Alloy 5182
J. Eng. Mater. Technol. April 2000, 122(2): 149–156.
doi: https://doi.org/10.1115/1.482780
Topics:
Aluminum alloys
,
Compression
,
Deformation
,
Drag (Fluid dynamics)
,
Finite element analysis
,
Hardening
,
Simulation
,
Stress
,
Temperature
Multiaxial Cyclic Ratcheting in Coiled Tubing—Part I: Theoretical Modeling
J. Eng. Mater. Technol. April 2000, 122(2): 157–161.
doi: https://doi.org/10.1115/1.482781
Topics:
Deformation
,
Hardening
,
Plasticity
,
Stress
,
Tubing
,
Pressure
,
Steel
,
Yield strength
Multiaxial Cyclic Ratcheting in Coiled Tubing—Part II: Experimental Program and Model Evaluation
J. Eng. Mater. Technol. April 2000, 122(2): 162–167.
doi: https://doi.org/10.1115/1.482782
Topics:
Pressure
,
Tubing
,
Stress
,
Shrinkage (Materials)
Thermomechanical Behavior and Modeling Between 350°C and 400°C of Zircaloy-4 Cladding Tubes From an Unirradiated State to High Fluence (0 to
J. Eng. Mater. Technol. April 2000, 122(2): 168–176.
doi: https://doi.org/10.1115/1.482783
The Influence of Intrinsic Strain Softening on Strain Localization in Polycarbonate: Modeling and Experimental Validation
J. Eng. Mater. Technol. April 2000, 122(2): 177–185.
doi: https://doi.org/10.1115/1.482784
Topics:
Compression
,
Deformation
,
Polymers
,
Simulation
,
Stress
,
Temperature
,
Torsion
,
Work hardening
,
Modeling
Low-Cycle Fatigue of TiNi Shape Memory Alloy and Formulation of Fatigue Life
J. Eng. Mater. Technol. April 2000, 122(2): 186–191.
doi: https://doi.org/10.1115/1.482785
Topics:
Fatigue life
,
Fatigue testing
,
Temperature
,
Low cycle fatigue
On the Nonuniform Deformation of the Cylinder Compression Test
J. Eng. Mater. Technol. April 2000, 122(2): 192–197.
doi: https://doi.org/10.1115/1.482786
Topics:
Compression
,
Cylinders
,
Deformation
,
Flow (Dynamics)
,
Friction
,
Stress
Fracture Static Mechanisms on Fatigue Crack Propagation in Microalloyed Forging Steels
J. Eng. Mater. Technol. April 2000, 122(2): 198–202.
doi: https://doi.org/10.1115/1.482787
Topics:
Fatigue cracks
,
Fracture (Materials)
,
Steel
,
Forging
,
Brittleness
,
Ferrites (Magnetic materials)
,
Particulate matter
,
Fatigue
Damage of Short-Fiber-Reinforced Metal Matrix Composites Considering Cooling and Thermal Cycling
J. Eng. Mater. Technol. April 2000, 122(2): 203–208.
doi: https://doi.org/10.1115/1.482788
Topics:
Cooling
,
Damage
,
Fibers
,
Metal matrix composites
,
Stress
,
Temperature
,
Tension
Probabilistic Mesomechanics for High Cycle Fatigue Life Prediction
J. Eng. Mater. Technol. April 2000, 122(2): 209–214.
doi: https://doi.org/10.1115/1.482789
Topics:
Fatigue life
,
Fracture (Materials)
,
Fatigue
,
High cycle fatigue
,
Stress
,
Nucleation (Physics)
Study of Surface Residual Stress by Three-Dimensional Displacement Data at a Single Point in Hole Drilling Method
J. Eng. Mater. Technol. April 2000, 122(2): 215–220.
doi: https://doi.org/10.1115/1.482790
Topics:
Displacement
,
Interferometry
,
Stress
,
Drilling
A Study of Burr Formation Processes Using the Finite Element Method: Part I
J. Eng. Mater. Technol. April 2000, 122(2): 221–228.
doi: https://doi.org/10.1115/1.482791
Topics:
Cutting
,
Deformation
,
Failure
,
Finite element analysis
,
Finite element methods
,
Finite element model
,
Metal cutting
,
Simulation
,
Steady state
,
Geometry
A Study of Burr Formation Processes Using the Finite Element Method: Part II—The Influences of Exit Angle, Rake Angle, and Backup Material on Burr Formation Processes
J. Eng. Mater. Technol. April 2000, 122(2): 229–237.
doi: https://doi.org/10.1115/1.482792
Topics:
Cutting
,
Damage
,
Deformation
,
Finite element analysis
,
Finite element methods
,
Finite element model
,
Metal cutting
,
Shear stress
,
Simulation
,
Stainless steel
Densification Behavior of Ceramic Powder Under Cold Compaction
J. Eng. Mater. Technol. April 2000, 122(2): 238–244.
doi: https://doi.org/10.1115/1.482793
Topics:
Ceramics
,
Compacting
,
Compression
,
Density
,
Finite element analysis
,
Stress
,
Friction
Email alerts
RSS Feeds
Computational Prediction of Total Fatigue Life with An Integrated Approach
J. Eng. Mater. Technol
Investigations on Formability Enhancement of Friction Stir Tailor-Welded Blanks
J. Eng. Mater. Technol (July 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)