Skip Nav Destination
Issues
January 1993
ISSN 0094-4289
EISSN 1528-8889
Foreword
Special Section on Heat and Mass Transfer in Solidification Processing
J. Eng. Mater. Technol. January 1993, 115(1): 1.
doi: https://doi.org/10.1115/1.2902151
Topics:
Heat
,
Mass transfer
,
Solidification
Research Papers
Papers on Heat and Mass Transfer in Solidification Processing
Issues in Thermal Contact and Phase Change in Porosity Prediction
J. Eng. Mater. Technol. January 1993, 115(1): 2–7.
doi: https://doi.org/10.1115/1.2902153
Topics:
Porosity
,
Solidification
,
Casting
,
Algorithms
,
Cavities
,
Cooling
,
Errors
,
Heat
,
Heat transfer
,
Heat transfer coefficients
Effect of Turbulent Heat Transfer on Continuous Ingot Solidification
J. Eng. Mater. Technol. January 1993, 115(1): 8–16.
doi: https://doi.org/10.1115/1.2902163
Topics:
Solidification
,
Turbulent heat transfer
,
Turbulence
,
Casting
,
Fluctuations (Physics)
,
Temperature
,
Accounting
,
Buoyancy
,
Cathode ray oscilloscopes
,
Convection
On the Solid-Fluid Transition Zone in Welding Analysis
J. Eng. Mater. Technol. January 1993, 115(1): 17–23.
doi: https://doi.org/10.1115/1.2902150
Topics:
Fluids
,
Welding
,
Equilibrium (Physics)
,
Alloys
,
Constitutive equations
,
Finite element methods
,
Finite element model
,
Heat
,
Incompressible fluids
,
Latent heat
Flow Effects on the Solidification Environment in a GTA Spot Weld
J. Eng. Mater. Technol. January 1993, 115(1): 24–29.
doi: https://doi.org/10.1115/1.2902152
Topics:
Flow (Dynamics)
,
Solidification
,
Simulation
,
Boundary layers
,
Buoyancy
,
Computer simulation
,
Currents
,
Fluid dynamics
,
Heat
,
Heating
Heat Transfer Effects During Solidification of Semicrystalline Polymers
J. Eng. Mater. Technol. January 1993, 115(1): 30–36.
doi: https://doi.org/10.1115/1.2902154
Topics:
Heat transfer
,
Polymers
,
Solidification
,
Crystallization
,
Cooling
,
Temperature
,
Thermal diffusion
,
Flow (Dynamics)
,
Heat
,
Nylon fabrics
Integrated Simulation of Fluid Flow and Heat Transfer in Injection Molding for the Prediction of Shrinkage and Warpage
J. Eng. Mater. Technol. January 1993, 115(1): 37–47.
doi: https://doi.org/10.1115/1.2902155
Topics:
Fluid dynamics
,
Heat transfer
,
Injection molding
,
Shrinkage (Materials)
,
Simulation
,
Warping
,
Polymer melts
,
Cooling
,
Flow (Dynamics)
,
Temperature
Numerical Simulation of the Coinjection Molding Process
J. Eng. Mater. Technol. January 1993, 115(1): 48–53.
doi: https://doi.org/10.1115/1.2902156
Topics:
Computer simulation
,
Molding
,
Polymer melts
,
Cavities
,
Engineers
,
Flow (Dynamics)
,
Injection molding
,
Laminates
,
Materials properties
,
Numerical analysis
Freezing Characteristics Along a Horizontal Cooled Tube Immersed in Aqueous Binary Solution With Main Flow
J. Eng. Mater. Technol. January 1993, 115(1): 54–62.
doi: https://doi.org/10.1115/1.2902157
Topics:
Flow (Dynamics)
,
Freezing
,
Cooling
,
Temperature
,
Copper
,
Dimensions
,
Ducts
,
Heat transfer
,
Reynolds number
,
Steady state
Production of a Finely Dispersed AlPb-Coating
J. Eng. Mater. Technol. January 1993, 115(1): 63–67.
doi: https://doi.org/10.1115/1.2902158
Topics:
Coating processes
,
Coatings
,
Composite materials
,
Alloys
,
Casting
,
Computer simulation
,
Cooling
,
Design
,
Diffusion (Physics)
,
Flow (Dynamics)
Additional Research Papers
Viscoplastic Behavior and Modelization of an Austenitic Stainless Steel (17-12 SPH) at High Temperature (T = 600°C), Under In and Out of Phase Cyclic Tension-Torsion Loading
J. Eng. Mater. Technol. January 1993, 115(1): 68–76.
doi: https://doi.org/10.1115/1.2902159
Topics:
High temperature
,
Stainless steel
,
Tension
,
Torsion
,
Temperature
,
Hardening
Yield and Flow Behavior of Initially Anisotropic Aluminum Tube Under Multiaxial Stresses
J. Eng. Mater. Technol. January 1993, 115(1): 77–82.
doi: https://doi.org/10.1115/1.2902160
Topics:
Aluminum tube
,
Anisotropy
,
Flow (Dynamics)
,
Stress
,
Pressure
,
Tension
,
Torsion
,
Rotation
,
Yield stress
Thermal-Induced Transformation of Retained Austenite in the Simulated Case of a Carburized Steel
J. Eng. Mater. Technol. January 1993, 115(1): 83–88.
doi: https://doi.org/10.1115/1.2902161
Topics:
Steel
,
Stress
,
Anisotropy
,
Diffusion (Physics)
,
Hydrostatics
Elastic-Plastic Response of Sintered Porous Iron Under Uniaxial Strain Cycling
J. Eng. Mater. Technol. January 1993, 115(1): 89–94.
doi: https://doi.org/10.1115/1.2902162
Topics:
Iron
,
Constitutive equations
,
Hardening
,
Kinematics
Boundary-Value Problem for Viscoelastic Creep in Deeply Imbedded Salt Vaults
J. Eng. Mater. Technol. January 1993, 115(1): 95–100.
doi: https://doi.org/10.1115/1.2902164
Topics:
Boundary-value problems
,
Creep
A Micromechanics Based Representation of Combined Mode I and II Toughness of Brittle Materials and Interfaces
J. Eng. Mater. Technol. January 1993, 115(1): 101–105.
doi: https://doi.org/10.1115/1.2902140
An Engineering Approach to Determine the Fatigue Life of Sheet Structures Under Cyclic Loading
J. Eng. Mater. Technol. January 1993, 115(1): 106–108.
doi: https://doi.org/10.1115/1.2902141
Topics:
Fatigue life
High Temperature Low-Cycle Fatigue of Friction Welded Joints-Type 304-304 Stainless Steel and Alloy 718-718 Nickel Base Superalloy
J. Eng. Mater. Technol. January 1993, 115(1): 109–115.
doi: https://doi.org/10.1115/1.2902142
Topics:
Alloys
,
Friction
,
High temperature
,
Low cycle fatigue
,
Nickel
,
Stainless steel
,
Superalloys
,
Fatigue strength
,
Base metals
,
Deformation
Compression Fatigue Response for Carbon Fiber With Conventional and Toughened Epoxy Matrices With Damage
J. Eng. Mater. Technol. January 1993, 115(1): 116–121.
doi: https://doi.org/10.1115/1.2902143
Topics:
Carbon fibers
,
Compression
,
Damage
,
Epoxy adhesives
,
Epoxy resins
,
Fatigue
,
Brittleness
,
Fracture toughness
,
Fatigue testing
,
Laminates
In-Situ Compressive Strength of Carbon/Epoxy AS4/3501-6 Laminates
J. Eng. Mater. Technol. January 1993, 115(1): 122–128.
doi: https://doi.org/10.1115/1.2902144
Topics:
Carbon
,
Compressive strength
,
Epoxy adhesives
,
Epoxy resins
,
Laminates
,
Failure
,
Fibers
,
Buckling
,
Composite materials
,
Compression
Finite Element Analysis of Whisker-Reinforced SiC/Al Composites Subjected to Cryogenic Temperature Thermal Cycling
J. Eng. Mater. Technol. January 1993, 115(1): 129–133.
doi: https://doi.org/10.1115/1.2902145
Stress Intensity Factors for Multiple Cracks in an Adhesively Bonded Sandwich Sheet
J. Eng. Mater. Technol. January 1993, 115(1): 134–139.
doi: https://doi.org/10.1115/1.2902146
Topics:
Fracture (Materials)
,
Stress
,
Adhesives
,
Density
,
Displacement
,
Fredholm integral equations
,
Shear stress
Effect of Fiber Reinforcement on Dynamic Crack Growth in Brittle Matrix Composites
J. Eng. Mater. Technol. January 1993, 115(1): 140–145.
doi: https://doi.org/10.1115/1.2902147
Topics:
Brittleness
,
Composite materials
,
Fibers
,
Fracture (Materials)
,
Stress
,
Fractography
Machinability of Fiber-Reinforced Thermoplastics in Drilling
J. Eng. Mater. Technol. January 1993, 115(1): 146–149.
doi: https://doi.org/10.1115/1.2902148
Topics:
Drilling
,
Fibers
,
Machinability
,
Composite materials
,
Carbon
,
Cutting
,
Machining
,
Plastics
,
Polymers
,
Wear
Modeling of Viscoplastic Adhering Process by a Finite Element Technique
J. Eng. Mater. Technol. January 1993, 115(1): 150–155.
doi: https://doi.org/10.1115/1.2902149
Email alerts
RSS Feeds
Evaluation of Machine Learning Models for Predicting the Hot Deformation Flow Stress of Sintered Al–Zn–Mg Alloy
J. Eng. Mater. Technol (April 2025)
Blast Mitigation Using Monolithic Closed-Cell Aluminum Foam
J. Eng. Mater. Technol (April 2025)
Irradiation Damage Evolution Dependence on Misorientation Angle for Σ 5 Grain Boundary of Nb: An Atomistic Simulation-Based Study
J. Eng. Mater. Technol (July 2025)
Influence of Ultrasonic Surface Rolling on the Tensile and Fatigue Properties of Laser-Cladding-Repaired 300M Steel Components
J. Eng. Mater. Technol (April 2025)