Volume 97 Issue 1 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 97, Issue 1

February 1975

This article was originally published in

Journal of Engineering for Industry

ISSN 0022-0817

Research Papers

Flanged Acrylic Plastic Hemispherical Shells for Undersea Application

J. D. Stachiw, J. R. Maison

J. Eng. Ind. February 1975, 97(1): 1–9. doi: https://doi.org/10.1115/1.3438537

Abstract

View articletitled, Flanged Acrylic Plastic Hemispherical Shells for Undersea Application

Open the PDF for in another window

Topics: Analytical methods , Boundary-value problems , Domes (Structural elements) , Elastic analysis , Finite element analysis , Flanges , Hydrostatic pressure , Pressure , Shells , Stress

Optimum Chute Profiles in Gravity Flow of Granular Materials: A Discrete Segment Solution Method

C. Chiarella, W. Charlton, A. W. Roberts

J. Eng. Ind. February 1975, 97(1): 10–13. doi: https://doi.org/10.1115/1.3438521

Abstract

View articletitled, Optimum Chute Profiles in Gravity Flow of Granular Materials: A Discrete Segment Solution Method

Open the PDF for in another window

Topics: Flow (Dynamics) , Granular materials , Gravity (Force) , Particulate matter , Shapes

Tensile Stress Distribution in the Cord of V-Belts

B. G. Gerbert

J. Eng. Ind. February 1975, 97(1): 14–22. doi: https://doi.org/10.1115/1.3438528

View articletitled, Tensile Stress Distribution in the Cord of V-Belts

Open the PDF for in another window

Topics: Tension , V-belts

Vibrations of an Intermediately Supported U-Bend Tube

L. S. S. Lee

J. Eng. Ind. February 1975, 97(1): 23–32. doi: https://doi.org/10.1115/1.3438545

Abstract

View articletitled, Vibrations of an Intermediately Supported U-Bend Tube

Open the PDF for in another window

Topics: Vibration , Stiffness , Arches

The Bending Problem of Axially Constrained Beams

S. DasGupta, J. B. Koeneman

J. Eng. Ind. February 1975, 97(1): 33–36. doi: https://doi.org/10.1115/1.3438560

Abstract

View articletitled, The Bending Problem of Axially Constrained Beams

Open the PDF for in another window

Topics: Deflection , Deformation , Design , Differential equations , Finite element methods

Effects of Tensioning on Buckling and Vibration of Circular Saw Blades

J. F. Carlin, F. C. Appl, H. C. Bridwell, R. P. DuBois

J. Eng. Ind. February 1975, 97(1): 37–48. doi: https://doi.org/10.1115/1.3438574

Abstract

View articletitled, Effects of Tensioning on Buckling and Vibration of Circular Saw Blades

Open the PDF for in another window

Topics: Blades , Buckling , Circular saws , Vibration , Stress

Computer Program to Generate Dimensional and Inertial Properties of the Human Body

J. A. Bartz, C. R. Gianotti

J. Eng. Ind. February 1975, 97(1): 49–57. doi: https://doi.org/10.1115/1.3438590

Abstract

View articletitled, Computer Program to Generate Dimensional and Inertial Properties of the Human Body

Open the PDF for in another window

Topics: Computer software , Dimensions , Rotational inertia , Weight (Mass)

Augmented Diffusion in Flowing Blood

W. A. Hyman

J. Eng. Ind. February 1975, 97(1): 58–60. doi: https://doi.org/10.1115/1.3438591

Abstract

View articletitled, Augmented Diffusion in Flowing Blood

Open the PDF for in another window

Topics: Blood , Diffusion (Physics) , Erythrocytes , Rotation , Shear rate

Analytical Prediction of the Heat Transfer From a Blood Vessel Near the Skin Surface Cooled by a Symmetrical Strip

J. C. Chato, A. Shitzer

J. Eng. Ind. February 1975, 97(1): 61–65. doi: https://doi.org/10.1115/1.3438592

Abstract

View articletitled, Analytical Prediction of the Heat Transfer From a Blood Vessel Near the Skin Surface Cooled by a Symmetrical Strip

Open the PDF for in another window

Topics: Blood vessels , Heat transfer , Skin , Strips , Symmetry (Physics) , Carotid arteries , Cooling , Heat , Blood flow , Steady state

Flow Stress Determination for Metals at Forging Rates and Temperatures

J. R. Douglas, T. Altan

J. Eng. Ind. February 1975, 97(1): 66–76. doi: https://doi.org/10.1115/1.3438593

Abstract

View articletitled, Flow Stress Determination for Metals at Forging Rates and Temperatures

Open the PDF for in another window

Topics: Flow (Dynamics) , Forging , Metals , Stress , Temperature , Compression , Stainless steel , Aluminum , Deformation , Alloys

The Disk Test for Brittle Materials

M. C. Shaw, P. M. Braiden, G. J. DeSalvo

J. Eng. Ind. February 1975, 97(1): 77–87. doi: https://doi.org/10.1115/1.3438594

Abstract

View articletitled, The Disk Test for Brittle Materials

Open the PDF for in another window

Topics: Brittleness , Disks , Fracture (Materials) , Stress , Tensile strength , Brittle fracture , Hydrostatics , Size effect , Statistics , Tungsten

Platelike Dynamic Vibration Absorbers

J. C. Snowdon

J. Eng. Ind. February 1975, 97(1): 88–93. doi: https://doi.org/10.1115/1.3438595

Abstract

View articletitled, Platelike Dynamic Vibration Absorbers

Open the PDF for in another window

Topics: Vibration absorbers , Damping , Plates (structures) , Springs , Breakwaters , Dampers , Design , Geometry , Resonance

Air and Power Requirements for the Pneumatic Transport of Crushed Coal in Horizontal Pipelines

J. L. Konchesky, T. J. George, J. G. Craig

J. Eng. Ind. February 1975, 97(1): 94–100. doi: https://doi.org/10.1115/1.3438596

Abstract

View articletitled, Air and Power Requirements for the Pneumatic Transport of Crushed Coal in Horizontal Pipelines

Open the PDF for in another window

Topics: Coal , Pipelines , Pipes , Pressure , Density , Vacuum , Design , Gravity (Force) , Horsepower , Pipeline systems

Air and Power Requirements for the Pneumatic Transport of Crushed Coal in Vertical Pipelines

J. L. Konchesky, T. J. George, J. G. Craig

J. Eng. Ind. February 1975, 97(1): 101–106. doi: https://doi.org/10.1115/1.3438519

Abstract

View articletitled, Air and Power Requirements for the Pneumatic Transport of Crushed Coal in Vertical Pipelines

Open the PDF for in another window

Topics: Coal , Pipelines , Pipes , Density , Pressure drop , Design , Horsepower , Pipeline systems , Pressure , Vacuum

Three-Dimensional Analysis of Form-Relieved Surface of Milling Cutter With Applications

M. Y. Friedman

J. Eng. Ind. February 1975, 97(1): 107–111. doi: https://doi.org/10.1115/1.3438520

Abstract

View articletitled, Three-Dimensional Analysis of Form-Relieved Surface of Milling Cutter With Applications

Open the PDF for in another window

Topics: Cutting , Design , Geometry , Milling

The Investigation of the Enhancement Mechanisms of the Oxide Treatment on Cemented Carbide Tools

S. K. Naik, N. P. Suh

J. Eng. Ind. February 1975, 97(1): 112–118. doi: https://doi.org/10.1115/1.3438522

Abstract

View articletitled, The Investigation of the Enhancement Mechanisms of the Oxide Treatment on Cemented Carbide Tools

Open the PDF for in another window

Topics: Carbide cutting tools , Adhesion , Metal cutting , Oxidation , Pressure , Temperature , X-ray diffraction

Plane Strain Forging—A Lower Upper Bound Approach

V. Nagpal, W. R. Clough

J. Eng. Ind. February 1975, 97(1): 119–124. doi: https://doi.org/10.1115/1.3438523

Abstract

View articletitled, Plane Strain Forging—A Lower Upper Bound Approach

Open the PDF for in another window

Topics: Forging , Plane strain , Pressure , Shapes , Strips

Influence of Transverse Anisotropy on the Plastic Collapse of Plates and Shells

J. Chakrabarty

J. Eng. Ind. February 1975, 97(1): 125–130. doi: https://doi.org/10.1115/1.3438524

Abstract

View articletitled, Influence of Transverse Anisotropy on the Plastic Collapse of Plates and Shells

Open the PDF for in another window

Topics: Anisotropy , Collapse , Plates (structures) , Shells , Stress , Yield stress

The Engineering Characteristics of Snow Skis—Part 1: Static Bending and Torsional Characteristics

A. Deak, J. Jorgensen, J. Vagners

J. Eng. Ind. February 1975, 97(1): 131–137. doi: https://doi.org/10.1115/1.3438525

Abstract

View articletitled, The Engineering Characteristics of Snow Skis—Part 1: Static Bending and Torsional Characteristics

Open the PDF for in another window

Topics: Composite materials , Construction , Euler-Bernoulli beam theory

The Rating of Abrasive Cutoff Wheels

M. C. Shaw

J. Eng. Ind. February 1975, 97(1): 138–146. doi: https://doi.org/10.1115/1.3438526

Abstract

View articletitled, The Rating of Abrasive Cutoff Wheels

Open the PDF for in another window

Topics: Wheels , Grain size , Cutting , Grinding , Wear resistance

Design of Springs of Rectangular Wire Coiled Edgewise

R. Dore´, S. Deslauriers, N. T. Hung

J. Eng. Ind. February 1975, 97(1): 147–152. doi: https://doi.org/10.1115/1.3438527

Abstract

View articletitled, Design of Springs of Rectangular Wire Coiled Edgewise

Open the PDF for in another window

Topics: Design , Springs , Wire , Stress , Cylinders , Deflection , Compression , Dimensions , Elasticity , Tension

Design of Springs Made of Flat Material

R. Dore´, S. Deslauriers

J. Eng. Ind. February 1975, 97(1): 153–156. doi: https://doi.org/10.1115/1.3438529

Abstract

View articletitled, Design of Springs Made of Flat Material

Open the PDF for in another window

Topics: Design , Springs , Stress , Deflection , Compression , Dimensions , Dislocations , Tension

Stress Distribution in Joints of Bolted or Riveted Connections

Nabil Motosh

J. Eng. Ind. February 1975, 97(1): 157–161. doi: https://doi.org/10.1115/1.3438530

View articletitled, Stress Distribution in Joints of Bolted or Riveted Connections

Open the PDF for in another window

Topics: Stress concentration

Load Distribution on Threads of Titanium Tension Nuts and Steel Bolts

Nabil Motosh

J. Eng. Ind. February 1975, 97(1): 162–166. doi: https://doi.org/10.1115/1.3438531

View articletitled, Load Distribution on Threads of Titanium Tension Nuts and Steel Bolts

Open the PDF for in another window

Topics: Screw threads , Steel , Stress , Tension , Thread , Titanium

The Mechanism of Conveyance With Bristled Tracks

W. Mansour, M. Massoud, W. Morcos, C. Lauzier

J. Eng. Ind. February 1975, 97(1): 167–174. doi: https://doi.org/10.1115/1.3438532

Abstract

View articletitled, The Mechanism of Conveyance With Bristled Tracks

Open the PDF for in another window

Topics: Cycles , Design , Equations of motion , Materials handling

Methods of Analysis for Very Thick-Walled Cylindrical Shells

J. R. Vinson

J. Eng. Ind. February 1975, 97(1): 175–181. doi: https://doi.org/10.1115/1.3438533

Abstract

View articletitled, Methods of Analysis for Very Thick-Walled Cylindrical Shells

Open the PDF for in another window

Topics: Approximation , Boundary-value problems , Elasticity , Pipes , Shells , Stress , Wall thickness

Necessary Conditions for Homogeneous Plastic Deformation of Composite Materials in Uniaxial Tension

S. Iscovici, B. Avitzur

J. Eng. Ind. February 1975, 97(1): 182–189. doi: https://doi.org/10.1115/1.3438534

Abstract

View articletitled, Necessary Conditions for Homogeneous Plastic Deformation of Composite Materials in Uniaxial Tension

Open the PDF for in another window

Topics: Composite materials , Deformation , Tension , Particulate matter , Pressure , Bonding , Geometry

Profile Characterization of Manufactured Surfaces Using Random Function Excursion Technique—Part 1: Theory

T. S. Sankar, M. O. M. Osman

J. Eng. Ind. February 1975, 97(1): 190–195. doi: https://doi.org/10.1115/1.3438535

Abstract

View articletitled, Profile Characterization of Manufactured Surfaces Using Random Function Excursion Technique—Part 1: Theory

Open the PDF for in another window

Topics: Filters , Probability , Surface roughness , Surface texture

Profile Characterization of Manufactured Surfaces Using Random Function Excursion Technique, Part 2: Application

M. O. M. Osman, T. S. Sankar

J. Eng. Ind. February 1975, 97(1): 196–202. doi: https://doi.org/10.1115/1.3438536

Abstract

View articletitled, Profile Characterization of Manufactured Surfaces Using Random Function Excursion Technique, Part 2: Application

Open the PDF for in another window

Topics: Cables , Computer-aided manufacturing , Computers , Filters , Mechanical properties , Texture (Materials)

Dynamic Acceptance Tests Applied to a Center-Type Lathe

M. M. Sadek, W. A. Knight

J. Eng. Ind. February 1975, 97(1): 203–210. doi: https://doi.org/10.1115/1.3438538

Abstract

View articletitled, Dynamic Acceptance Tests Applied to a Center-Type Lathe

Open the PDF for in another window

Topics: Excitation , Excitation systems , Machinery , Stability , Thrust , Vibration , Vibration tests , Weight (Mass)

Modeling Machine Tool Chatter by Time Series

S. M. Pandit, T. L. Subramanian, S. M. Wu

J. Eng. Ind. February 1975, 97(1): 211–215. doi: https://doi.org/10.1115/1.3438539

Abstract

View articletitled, Modeling Machine Tool Chatter by Time Series

Open the PDF for in another window

Topics: Chatter , Machine tools , Modeling , Time series , Cutting , Random vibration , Signals , Turning , Vibration , White noise

Stability of Random Vibrations With Special Reference to Machine Tool Chatter

S. M. Pandit, T. L. Subramanian, S. M. Wu

J. Eng. Ind. February 1975, 97(1): 216–219. doi: https://doi.org/10.1115/1.3438540

Abstract

View articletitled, Stability of Random Vibrations With Special Reference to Machine Tool Chatter

Open the PDF for in another window

Topics: Chatter , Machine tools , Random vibration , Stability , Time series , Vibration , Cutting tools , Differential equations , Resonance , Signals

NS-100 Membranes for Reverse Osmosis Applications

L. T. Rozelle, C. V. Kopp, Jr., J. E. Cadotte, K. E. Cobian

J. Eng. Ind. February 1975, 97(1): 220–223. doi: https://doi.org/10.1115/1.3438541

Abstract

View articletitled, NS-100 Membranes for Reverse Osmosis Applications

Open the PDF for in another window

Topics: Membranes , Reverse osmosis , Heat , Linkages , Water , Flux (Metallurgy) , Hardening (Curing) , Organic compounds , Polymers , Seawater

Integrated Water and Waste Management System for Future Spacecraft

A. L. Ingelfinger, R. W. Murray

J. Eng. Ind. February 1975, 97(1): 224–227. doi: https://doi.org/10.1115/1.3438542

Abstract

View articletitled, Integrated Water and Waste Management System for Future Spacecraft

Open the PDF for in another window

Topics: Space vehicles , Waste management , Water , Radioisotopes , Heat , Bacteria , Heating , Hot water heating , Municipal solid wastes , NASA

The Dispersion and Detectability of Sanitary Waste-Water Discharges From Navy Ships

C. S. Alig, W. van Hees

J. Eng. Ind. February 1975, 97(1): 228–237. doi: https://doi.org/10.1115/1.3438543

Abstract

View articletitled, The Dispersion and Detectability of Sanitary Waste-Water Discharges From Navy Ships

Open the PDF for in another window

Topics: Navy , Ships , Water , Pollution , Shorelines , Bacteria , Seawater , Industrial research , Locations , Nitrogen

Membrane Processing in the Metal Finishing Industry

R. L. Goldsmith

J. Eng. Ind. February 1975, 97(1): 238–245. doi: https://doi.org/10.1115/1.3438544

Abstract

View articletitled, Membrane Processing in the Metal Finishing Industry

Open the PDF for in another window

Topics: Membranes , Metal finishing , Electroplating , Reverse osmosis , Water , Emulsions , Fuels , Plating baths , Waste treatment , Coolants

Waste-Treatment Applications of Reverse Osmosis

J. E. Cruver

J. Eng. Ind. February 1975, 97(1): 246–251. doi: https://doi.org/10.1115/1.3438546

Abstract

View articletitled, Waste-Treatment Applications of Reverse Osmosis

Open the PDF for in another window

Topics: Reverse osmosis , Waste treatment , Industrial wastes , Metal finishing , Textile dyes , Water

Hydrofluoric Acid Reaction With Sandstone Formations

B. B. Williams

J. Eng. Ind. February 1975, 97(1): 252–258. doi: https://doi.org/10.1115/1.3438547

View articletitled, Hydrofluoric Acid Reaction With Sandstone Formations

Open the PDF for in another window

Transient Analysis of Offshore Loading Systems

V. L. Streeter, E. B. Wylie

J. Eng. Ind. February 1975, 97(1): 259–265. doi: https://doi.org/10.1115/1.3438548

Abstract

View articletitled, Transient Analysis of Offshore Loading Systems

Open the PDF for in another window

Topics: Failure , Flow (Dynamics) , Fluid dynamics , Ocean engineering , Pipes , Pumps , Transient analysis , Transients (Dynamics) , Turbomachinery , Underwater pipelines

An Analytical Study of Controlled Buoyancy in Laying Deep-Sea Pipelines

J. E. Hall, A. J. Healey

J. Eng. Ind. February 1975, 97(1): 266–273. doi: https://doi.org/10.1115/1.3438549

Abstract

View articletitled, An Analytical Study of Controlled Buoyancy in Laying Deep-Sea Pipelines

Open the PDF for in another window

Topics: Buoyancy , Pipelines , Seas , Buoys , Underwater pipelines , Boundary-value problems , Oceans , Pipes , Stress concentration , Tension

Steels for Seamless Hydrogen Pressure Vessels

A. W. Loginow, E. H. Phelps

J. Eng. Ind. February 1975, 97(1): 274–282. doi: https://doi.org/10.1115/1.3438550

Abstract

View articletitled, Steels for Seamless Hydrogen Pressure Vessels

Open the PDF for in another window

Topics: Hydrogen , Pressure vessels , Steel , Crack propagation , Cracking (Materials) , Design , Fracture (Materials) , Fracture (Process) , Mechanical properties , Pressure

Mechanism Design: Accounting for Manufacturing Tolerances and Costs in Function Generating Problems

G. H. Sutherland, B. Roth

J. Eng. Ind. February 1975, 97(1): 283–286. doi: https://doi.org/10.1115/1.3438551

Abstract

View articletitled, Mechanism Design: Accounting for Manufacturing Tolerances and Costs in Function Generating Problems

Open the PDF for in another window

Topics: Accounting , Design , Manufacturing , Algorithms , Errors , Linkages

Dynamic Synthesis of Cams Using Finite Trigonometric Series

J. L. Wiederrich, B. Roth

J. Eng. Ind. February 1975, 97(1): 287–293. doi: https://doi.org/10.1115/1.3438552

Abstract

View articletitled, Dynamic Synthesis of Cams Using Finite Trigonometric Series

Open the PDF for in another window

Topics: Cams , Design , Vibration

On the Motion of a Set of Spheres Between Two Parallel Planes

F. Freudenstein, E. So¨ylemez

J. Eng. Ind. February 1975, 97(1): 294–302. doi: https://doi.org/10.1115/1.3438553

Abstract

View articletitled, On the Motion of a Set of Spheres Between Two Parallel Planes

Open the PDF for in another window

Topics: Ball bearings , Rolling contact

An Improved Least-Squares Method for Designing Function-Generating Mechanisms

G. H. Sutherland, B. Roth

J. Eng. Ind. February 1975, 97(1): 303–307. doi: https://doi.org/10.1115/1.3438554

Abstract

View articletitled, An Improved Least-Squares Method for Designing Function-Generating Mechanisms

Open the PDF for in another window

Topics: Algorithms , Design , Linkages

Kineto-Elastodynamic Analysis of Slider-Crank Mechanism With a Flexibly Attached Slider

J. Chakraborty, A. K. Khare

J. Eng. Ind. February 1975, 97(1): 308–313. doi: https://doi.org/10.1115/1.3438555

Abstract

View articletitled, Kineto-Elastodynamic Analysis of Slider-Crank Mechanism With a Flexibly Attached Slider

Open the PDF for in another window

Topics: Damping , Elasticity , Elastodynamics , Friction , Springs

Optimum Synthesis of Path-Generating Four-Bar Mechanisms

N. Bakthavachalam, J. T. Kimbrell

J. Eng. Ind. February 1975, 97(1): 314–321. doi: https://doi.org/10.1115/1.3438556

Abstract

View articletitled, Optimum Synthesis of Path-Generating Four-Bar Mechanisms

Open the PDF for in another window

Topics: Gradient methods , Optimization

The Displacement Synthesis of Four-Bar Straight-Line Mechanisms

R. G. Mitchiner, H. H. Mabie

J. Eng. Ind. February 1975, 97(1): 322–326. doi: https://doi.org/10.1115/1.3438557

Abstract

View articletitled, The Displacement Synthesis of Four-Bar Straight-Line Mechanisms

Open the PDF for in another window

Topics: Displacement , Linkages

A Unified Approach to the Analytical Design of Three-Dimensional Cam Mechanisms

S. G. Dhande, B. S. Bhadoria, J. Chakraborty

J. Eng. Ind. February 1975, 97(1): 327–333. doi: https://doi.org/10.1115/1.3438558

Abstract

View articletitled, A Unified Approach to the Analytical Design of Three-Dimensional Cam Mechanisms

Open the PDF for in another window

Topics: Analytical design , Cams , Disks , Grinding wheels , Pressure , Rollers

On the Motion of a Class of Five-Link, R-C-R-C-R, Spatial Mechanisms

P. R. Pamidi, F. Freudenstein

J. Eng. Ind. February 1975, 97(1): 334–339. doi: https://doi.org/10.1115/1.3438559

Abstract

View articletitled, On the Motion of a Class of Five-Link, R-C-R-C-R, Spatial Mechanisms

Open the PDF for in another window

Topics: Algebra

Optimum Synthesis of Plane Mechanisms for the Generation of Paths and Rigid-Body Positions via the Linear Superposition Technique

C. Bagci, In-Ping Jack Lee

J. Eng. Ind. February 1975, 97(1): 340–346. doi: https://doi.org/10.1115/1.3438561

Abstract

View articletitled, Optimum Synthesis of Plane Mechanisms for the Generation of Paths and Rigid-Body Positions via the Linear Superposition Technique

Open the PDF for in another window

Topics: Approximation , Design , Dimensions , Errors , Linkages

Impact Spectra and Intensities for High-Speed Mechanisms

W. M. Mansour, M. A. Townsend

J. Eng. Ind. February 1975, 97(1): 347–353. doi: https://doi.org/10.1115/1.3438562

Abstract

View articletitled, Impact Spectra and Intensities for High-Speed Mechanisms

Open the PDF for in another window

Topics: Spectra (Spectroscopy) , Clearances (Engineering) , Design , Friction , Resonance

A Pendulating Model for Mechanisms With Clearances in the Revolutes

M. A. Townsend, W. M. Mansour

J. Eng. Ind. February 1975, 97(1): 354–358. doi: https://doi.org/10.1115/1.3438563

Abstract

View articletitled, A Pendulating Model for Mechanisms With Clearances in the Revolutes

Open the PDF for in another window

Topics: Cycles , Design , Impulse (Physics) , Momentum , Noise (Sound) , Rotation , Shock absorbers , Springs , Wear

Fatigue Reliability With Notch Effects for AISI 4130 and 1038 Steels

D. Kececioglu, J. D. Stultz, L. B. Chester, C. F. Nolf, Jr.

J. Eng. Ind. February 1975, 97(1): 359–370. doi: https://doi.org/10.1115/1.3438564

Abstract

View articletitled, Fatigue Reliability With Notch Effects for AISI 4130 and 1038 Steels

Open the PDF for in another window

Topics: Fatigue , Reliability , Steel , Stress concentration , Design , Rods

Technical Briefs

A Geometric Programming Decomposition Procedure

J. M. Trzeciak, V. A. Sposito

J. Eng. Ind. February 1975, 97(1): 371–373. doi: https://doi.org/10.1115/1.3438565

View articletitled, A Geometric Programming Decomposition Procedure

Open the PDF for in another window

Topics: Computer programming

Speedy Design of Helical Compression Springs by Nomography Method

T. K. Tsai

J. Eng. Ind. February 1975, 97(1): 373–375. doi: https://doi.org/10.1115/1.3438566

Abstract

View articletitled, Speedy Design of Helical Compression Springs by Nomography Method

Open the PDF for in another window

Topics: Compression , Design , Springs

Boundary Conditions and the Response of a Spinning Precessing Rotor

W. E. Red

J. Eng. Ind. February 1975, 97(1): 375–377. doi: https://doi.org/10.1115/1.3438567

View articletitled, Boundary Conditions and the Response of a Spinning Precessing Rotor

Open the PDF for in another window

Topics: Boundary-value problems , Rotors , Spin (Aerodynamics) , Spinning (Textile)

Discussions

Discussion: “Statistical Analysis, Estimation, and Optimization of Surface Finish in the Grinding Process” (Zohdi, M. E., 1974, ASME J. Eng. Ind., 96, pp. 117–123)

Norman M. Wickstrand

J. Eng. Ind. February 1975, 97(1): 378. doi: https://doi.org/10.1115/1.3438568

View articletitled, Discussion: “Statistical Analysis, Estimation, and Optimization of Surface Finish in the Grinding Process” (Zohdi, M. E., 1974, ASME J. Eng. Ind., 96, pp. 117–123)

Open the PDF for in another window

Topics: Finishes , Grinding , Optimization , Statistical analysis

Closure to “Discussion of ‘Statistical Analysis, Estimation, and Optimization of Surface Finish in the Grinding Process’” (1975, ASME J. Eng. Ind., 97, p. 378)

M. E. Zohdi

J. Eng. Ind. February 1975, 97(1): 378. doi: https://doi.org/10.1115/1.3438569

View articletitled, Closure to “Discussion of ‘Statistical Analysis, Estimation, and Optimization of Surface Finish in the Grinding Process’” (1975, ASME J. Eng. Ind., 97, p. 378)

Open the PDF for in another window

Topics: Finishes , Grinding , Optimization , Statistical analysis

Discussion: “Assessment of Ultimate Fidelity of an Eccentric Circular Disk Cam With Translating Flat-Faced Follower as a Function Generator” (Mischke, C., 1974, ASME J. Eng. Ind., 96, pp. 256–260)

J. Chakraborty

J. Eng. Ind. February 1975, 97(1): 378–379. doi: https://doi.org/10.1115/1.3438570

View articletitled, Discussion: “Assessment of Ultimate Fidelity of an Eccentric Circular Disk Cam With Translating Flat-Faced Follower as a Function Generator” (Mischke, C., 1974, ASME J. Eng. Ind., 96, pp. 256–260)

Open the PDF for in another window

Topics: Disks , Generators

Closure to “Discussion of ‘Assessment of Ultimate Fidelity of an Eccentric Circular Disk Cam With Translating Flat-Faced Follower as a Function Generator’” (1975, ASME J. Eng. Ind., 97, pp. 378–379)

C. Mischke

J. Eng. Ind. February 1975, 97(1): 379. doi: https://doi.org/10.1115/1.3438571

View articletitled, Closure to “Discussion of ‘Assessment of Ultimate Fidelity of an Eccentric Circular Disk Cam With Translating Flat-Faced Follower as a Function Generator’” (1975, ASME J. Eng. Ind., 97, pp. 378–379)

Open the PDF for in another window

Topics: Disks

Discussion: “An Experimental Investigation of the Dynamic Response of an Elastic Mechanism” (Alexander, R. M., and Lawrence, K. L., 1974, ASME J. Eng. Ind., 96, pp. 267–274)

Fan Y. Chen

J. Eng. Ind. February 1975, 97(1): 379. doi: https://doi.org/10.1115/1.3438572

View articletitled, Discussion: “An Experimental Investigation of the Dynamic Response of an Elastic Mechanism” (Alexander, R. M., and Lawrence, K. L., 1974, ASME J. Eng. Ind., 96, pp. 267–274)

Open the PDF for in another window

Topics: Dynamic response

Closure to “Discussion of ‘An Experimental Investigation of the Dynamic Response of an Elastic Mechanism’” (1975, ASME J. Eng. Ind., 97, p. 379)

R. M. Alexander, K. L. Lawrence

J. Eng. Ind. February 1975, 97(1): 379. doi: https://doi.org/10.1115/1.3438573

View articletitled, Closure to “Discussion of ‘An Experimental Investigation of the Dynamic Response of an Elastic Mechanism’” (1975, ASME J. Eng. Ind., 97, p. 379)

Open the PDF for in another window

Topics: Dynamic response

Discussion: “Analysis of a Thin Elastic Ring Under Arbitrary Loading” (Liu, J. Y., and Chiu, Y. P., 1974, ASME J. Eng. Ind., 96, pp. 870–876)

G. M. Kurajian, T. Y. Na

J. Eng. Ind. February 1975, 97(1): 380. doi: https://doi.org/10.1115/1.3438575

View articletitled, Discussion: “Analysis of a Thin Elastic Ring Under Arbitrary Loading” (Liu, J. Y., and Chiu, Y. P., 1974, ASME J. Eng. Ind., 96, pp. 870–876)

Open the PDF for in another window

Closure to “Discussion of ‘Analysis of a Thin Elastic Ring Under Arbitrary Loading’” (1975, ASME J. Eng. Ind., 97, p. 380)

J. Y. Liu, Y. P. Chiu

J. Eng. Ind. February 1975, 97(1): 380. doi: https://doi.org/10.1115/1.3438576

View articletitled, Closure to “Discussion of ‘Analysis of a Thin Elastic Ring Under Arbitrary Loading’” (1975, ASME J. Eng. Ind., 97, p. 380)

Open the PDF for in another window

Discussion: “Optimum Design of Four-Bar Crank Mechanisms With Prescribed Extreme Velocity Ratios” (Savage, M., and Suchora, D. H., 1974, ASME J. Eng. Ind., 96, pp. 1314–1321)

P. R. Pamidi

J. Eng. Ind. February 1975, 97(1): 380–381. doi: https://doi.org/10.1115/1.3438577

View articletitled, Discussion: “Optimum Design of Four-Bar Crank Mechanisms With Prescribed Extreme Velocity Ratios” (Savage, M., and Suchora, D. H., 1974, ASME J. Eng. Ind., 96, pp. 1314–1321)

Open the PDF for in another window

Topics: Design

Closure to “Discussion of ‘Optimum Design of Four-Bar Crank Mechanisms With Prescribed Extreme Velocity Ratios’” (1975, ASME J. Eng. Ind., 97, pp. 380–381)

M. Savage, D. H. Suchora

J. Eng. Ind. February 1975, 97(1): 381. doi: https://doi.org/10.1115/1.3438578

View articletitled, Closure to “Discussion of ‘Optimum Design of Four-Bar Crank Mechanisms With Prescribed Extreme Velocity Ratios’” (1975, ASME J. Eng. Ind., 97, pp. 380–381)

Open the PDF for in another window

Topics: Design

Discussion: “Higher-Order Kinematic Analysis of Multi-Rigid Body Systems” (Gupta, V. K., 1974, Mechanical Engineering, 96, p. 60)

D. M. Wallace

J. Eng. Ind. February 1975, 97(1): 381. doi: https://doi.org/10.1115/1.3438579

View articletitled, Discussion: “Higher-Order Kinematic Analysis of Multi-Rigid Body Systems” (Gupta, V. K., 1974, Mechanical Engineering, 96, p. 60)

Open the PDF for in another window

Topics: Kinematic analysis , Mechanical engineering

Closure to “Discussion of ‘Higher-Order Kinematic Analysis of Multi-Rigid Body Systems’” (1975, ASME J. Eng. Ind., 97, p. 381)

V. K. Gupta

J. Eng. Ind. February 1975, 97(1): 381–382. doi: https://doi.org/10.1115/1.3438580

View articletitled, Closure to “Discussion of ‘Higher-Order Kinematic Analysis of Multi-Rigid Body Systems’” (1975, ASME J. Eng. Ind., 97, p. 381)

Open the PDF for in another window

Topics: Kinematic analysis

Discussion: “Dynamic Stability of Cars in Long Freight Trains” (Blader, F. B., and Kurtz, E. F., 1974, ASME J. Eng. Ind., 96, pp. 1159–1167)

J. R. Amyot

J. Eng. Ind. February 1975, 97(1): 382. doi: https://doi.org/10.1115/1.3438581

View articletitled, Discussion: “Dynamic Stability of Cars in Long Freight Trains” (Blader, F. B., and Kurtz, E. F., 1974, ASME J. Eng. Ind., 96, pp. 1159–1167)

Open the PDF for in another window

Topics: Automobiles , Dynamic stability , Trains

Closure to “Discussion of ‘Dynamic Stability of Cars in Long Freight Trains’” (1975, ASME J. Eng. Ind., 97, p. 382)

F. B. Blader, E. F. Kurtz

J. Eng. Ind. February 1975, 97(1): 382. doi: https://doi.org/10.1115/1.3438582

View articletitled, Closure to “Discussion of ‘Dynamic Stability of Cars in Long Freight Trains’” (1975, ASME J. Eng. Ind., 97, p. 382)

Open the PDF for in another window

Topics: Automobiles , Dynamic stability

Discussion: “Machine Tool Chatter: Effect of Surface Slope of Machining Forces During Wave Removing” (Sarnicola, J. F., and Boothroyd, G., 1974, ASME J. Eng. Ind., 96, pp. 1202–1206)

W. B. Rice

J. Eng. Ind. February 1975, 97(1): 383. doi: https://doi.org/10.1115/1.3438583

View articletitled, Discussion: “Machine Tool Chatter: Effect of Surface Slope of Machining Forces During Wave Removing” (Sarnicola, J. F., and Boothroyd, G., 1974, ASME J. Eng. Ind., 96, pp. 1202–1206)

Open the PDF for in another window

Topics: Chatter , Machine tools , Machining , Waves

Closure to “Discussion of ‘Machine Tool Chatter: Effect of Surface Slope of Machining Forces During Wave Removing’” (1975, ASME J. Eng. Ind., 97, p. 383)

J. F. Sarnicola, G. Boothroyd

J. Eng. Ind. February 1975, 97(1): 383. doi: https://doi.org/10.1115/1.3438584

View articletitled, Closure to “Discussion of ‘Machine Tool Chatter: Effect of Surface Slope of Machining Forces During Wave Removing’” (1975, ASME J. Eng. Ind., 97, p. 383)

Open the PDF for in another window

Topics: Chatter , Machine tools , Machining , Waves

Discussion: “Critical Reynolds Number Estimates by Thermodynamic (Stochastic) Methods” (Hrycak, P., and Levy, M. J., 1974, ASME J. Eng. Ind., 96, pp. 788–794)

L. Schmerzler

J. Eng. Ind. February 1975, 97(1): 383. doi: https://doi.org/10.1115/1.3438585

View articletitled, Discussion: “Critical Reynolds Number Estimates by Thermodynamic (Stochastic) Methods” (Hrycak, P., and Levy, M. J., 1974, ASME J. Eng. Ind., 96, pp. 788–794)

Open the PDF for in another window

Topics: Reynolds number

Closure to “Discussion of ‘Critical Reynolds Number Estimates by Thermodynamic (Stochastic) Methods’” (1975, ASME J. Eng. Ind., 97, p. 383)

P. Hrycak, M. J. Levy

J. Eng. Ind. February 1975, 97(1): 383. doi: https://doi.org/10.1115/1.3438586

View articletitled, Closure to “Discussion of ‘Critical Reynolds Number Estimates by Thermodynamic (Stochastic) Methods’” (1975, ASME J. Eng. Ind., 97, p. 383)

Open the PDF for in another window

Topics: Reynolds number

Discussion: “Design of Multi-Recess Hydrostatic Journal Bearings for Minimum Total Power Loss” (Cusano, C., and Conry, T. F., 1974, ASME J. Eng. Ind., 96, pp. 226–232)

B. C. Majumdar

J. Eng. Ind. February 1975, 97(1): 383–384. doi: https://doi.org/10.1115/1.3438588

View articletitled, Discussion: “Design of Multi-Recess Hydrostatic Journal Bearings for Minimum Total Power Loss” (Cusano, C., and Conry, T. F., 1974, ASME J. Eng. Ind., 96, pp. 226–232)

Open the PDF for in another window

Topics: Design , Hydrostatics , Journal bearings

Closure to “Discussion of ‘Design of Multi-Recess Hydrostatic Journal Bearings for Minimum Total Power Loss’” (1975, ASME J. Eng. Ind., 97, pp. 383–384)

C. Cusano, T. F. Conry

J. Eng. Ind. February 1975, 97(1): 384. doi: https://doi.org/10.1115/1.3438589

View articletitled, Closure to “Discussion of ‘Design of Multi-Recess Hydrostatic Journal Bearings for Minimum Total Power Loss’” (1975, ASME J. Eng. Ind., 97, pp. 383–384)

Open the PDF for in another window

Topics: Design , Hydrostatics , Journal bearings

Errata

Erratum: “Critical Reynolds Number Estimates by Thermodynamic (Stochastic) Methods” (Journal of Engineering for Industry, 1974, 96, pp. 788–794)

P. Hrycak, M. J. Levy

J. Eng. Ind. February 1975, 97(1): 383. doi: https://doi.org/10.1115/1.3438587

View articletitled, Erratum: “Critical Reynolds Number Estimates by Thermodynamic (Stochastic) Methods” (Journal of Engineering for Industry, 1974, 96, pp. 788–794)

Open the PDF for in another window

Topics: Reynolds number

Issues

Research Papers

Technical Briefs

Discussions

Errata

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only