Skip Nav Destination
Issues
May 1974
This article was originally published in
Journal of Engineering for Industry
ISSN 0022-0817
In this Issue
Research Papers
Efficiency of Gear Transmissions With Flexibly Connected Gears Subjected to Axial Vibrations
J. Eng. Ind. May 1974, 96(2): 353–358.
doi: https://doi.org/10.1115/1.3438337
Surface Durability of Spur Gears at Hertzian Stresses Over Shakedown Limit
J. Eng. Ind. May 1974, 96(2): 359–372.
doi: https://doi.org/10.1115/1.3438338
Topics:
Durability
,
Spur gears
,
Stress
,
Gears
,
Rollers
,
Machinery
,
Carbon steel
,
Disks
,
Fatigue testing
,
Rolling contact
Dynamic Behavior of Heavy-Loaded Spur Gears
J. Eng. Ind. May 1974, 96(2): 373–381.
doi: https://doi.org/10.1115/1.3438339
Topics:
Spur gears
,
Stress
,
Gears
,
Deformation
,
Errors
,
Failure
,
Blanks
,
Gear teeth
,
Manufacturing
,
Stiffness
An Improved Determination of the Elastic Compliance of a Spur Gear Tooth Acted on by a Concentrated Load
J. Eng. Ind. May 1974, 96(2): 382–384.
doi: https://doi.org/10.1115/1.3438340
Topics:
Spur gears
,
Stress
Surface Temperature and Scoring Resistance of Heavy-Duty Gears
J. Eng. Ind. May 1974, 96(2): 385–390.
doi: https://doi.org/10.1115/1.3438341
Topics:
Gears
,
Temperature
,
Spur gears
,
Thermocouples
The Laboratory Simulation of Vehicle Service Stress
J. Eng. Ind. May 1974, 96(2): 391–398.
doi: https://doi.org/10.1115/1.3438342
Topics:
Simulation
,
Stress
,
Vehicles
,
Excitation
,
Pavement
,
Roads
,
Signals
,
Spectral energy distribution
Response Spectra of Strain Hardening Structural Systems to Earthquake Motions
J. Eng. Ind. May 1974, 96(2): 399–404.
doi: https://doi.org/10.1115/1.3438343
Topics:
Earthquakes
,
Spectra (Spectroscopy)
,
Work hardening
,
Displacement
,
Degrees of freedom
,
Design
,
Ductility
,
Elasticity
Electromechanical Simulation of Helicopter Blade Responses to Random Excitation During Forward Flight
J. Eng. Ind. May 1974, 96(2): 405–410.
doi: https://doi.org/10.1115/1.3438344
Topics:
Blades
,
Flight
,
Random excitation
,
Simulation
,
Transfer functions
,
Excitation
,
Spectra (Spectroscopy)
,
Computer simulation
,
Deflection
,
Rotors
Nonlinear Vibration Analysis of Elastic Four-Bar Linkages
J. Eng. Ind. May 1974, 96(2): 411–419.
doi: https://doi.org/10.1115/1.3438345
Free Vibrations of Fluid-Conveying Cylindrical Shells
J. Eng. Ind. May 1974, 96(2): 420–426.
doi: https://doi.org/10.1115/1.3438346
Topics:
Fluids
,
Free vibrations
,
Pipes
,
Flow (Dynamics)
,
Fluid dynamics
,
Fluid-dynamic forces
,
Shells
,
Spectra (Spectroscopy)
,
Water hammer
Experimental Investigation of a Simple Squeeze Film Damper
J. Eng. Ind. May 1974, 96(2): 427–430.
doi: https://doi.org/10.1115/1.3438347
Topics:
Dampers
,
Damping
,
Film thickness
,
Rotors
,
Viscosity
Further Experiments on Balancing of a High-Speed Flexible Rotor
J. Eng. Ind. May 1974, 96(2): 431–440.
doi: https://doi.org/10.1115/1.3438348
Topics:
Rotors
,
Vibration
,
Computer software
,
Transducers
Torsional Response of Internal Combustion Engines
J. Eng. Ind. May 1974, 96(2): 441–449.
doi: https://doi.org/10.1115/1.3438349
Topics:
Internal combustion engines
,
Engines
,
Compressors
,
Computer simulation
,
Computers
,
Diesel engines
,
Fourier series
,
Gasoline engines
,
Mode shapes
,
Pressure
Friction Induced Rotor Whirl—A Study in Stability
J. Eng. Ind. May 1974, 96(2): 450–454.
doi: https://doi.org/10.1115/1.3438350
Topics:
Friction
,
Rotors
,
Stability
,
Whirls
,
Clearances (Engineering)
,
Damping
,
Deflection
,
Machinery
,
Probability
,
Stators
A Sparse Matrix Technique for Fundamental Mode Analysis in Power Transmission Systems
J. Eng. Ind. May 1974, 96(2): 455–458.
doi: https://doi.org/10.1115/1.3438351
Topics:
Computer programming
,
Mode shapes
,
Rotation
Analytical and Experimental Studies of a Mechanical Pulse Generator
J. Eng. Ind. May 1974, 96(2): 459–470.
doi: https://doi.org/10.1115/1.3438352
Topics:
Generators
,
Cutting tools
,
Stress
,
Engineering simulation
,
Metals
,
Shock (Mechanics)
,
Simulation
,
Transients (Dynamics)
Optimization of the Response of Frictionally Damped Beam Type Structures With Reference to Gas Turbine Compressor Blading
J. Eng. Ind. May 1974, 96(2): 471–476.
doi: https://doi.org/10.1115/1.3438353
Topics:
Compressors
,
Gas turbines
,
Optimization
,
Stress
,
Blades
,
Displacement
,
Engineering design processes
The Response of Rotating Machinery to External Random Vibration
J. Eng. Ind. May 1974, 96(2): 477–489.
doi: https://doi.org/10.1115/1.3438354
Topics:
Machinery
,
Random vibration
,
Rotors
,
Bearings
,
Thrust bearings
,
Spectral energy distribution
,
Vibration
,
Capacitance
,
Displacement
,
Journal bearings
In-Vacuo Modal Dynamic Response of the Human Skull
J. Eng. Ind. May 1974, 96(2): 490–494.
doi: https://doi.org/10.1115/1.3438355
Topics:
Cavitation
,
Damage
,
Dynamic response
,
Finite element model
,
Rotation
,
Shapes
,
Thin shells
,
Vibration
Design and Analysis of an Energy Absorbing Restraint System for Light Aircraft Crash-Impact
J. Eng. Ind. May 1974, 96(2): 495–502.
doi: https://doi.org/10.1115/1.3438356
Topics:
Aircraft
,
Design
,
Restraint systems
,
Aviation
,
Deformation
,
Steel
,
Wire
,
Wounds
Prediction of Objective Passenger Comfort From Road Profile
J. Eng. Ind. May 1974, 96(2): 503–508.
doi: https://doi.org/10.1115/1.3438357
Topics:
Roads
,
Vehicles
,
Electromagnetic spectrum
,
Signals
,
Surface roughness
,
Transfer functions
Stability and Damped Critical Speeds of a Flexible Rotor in Fluid-Film Bearings
J. Eng. Ind. May 1974, 96(2): 509–517.
doi: https://doi.org/10.1115/1.3438358
Topics:
Bearings
,
Fluid films
,
Rotors
,
Stability
,
Damping
,
Aerodynamics
,
Compressors
,
Computation
,
Fluid-dynamic forces
,
Geometry
On the Dynamic Accuracy of Machine-Tool Hydraulic Copying Systems
J. Eng. Ind. May 1974, 96(2): 518–524.
doi: https://doi.org/10.1115/1.3438359
Topics:
Computer simulation
,
Cutting
,
Cylinders
,
Design
,
Dry friction
,
Errors
,
Flow (Dynamics)
,
Fluctuations (Physics)
,
Kinematics
,
Machine tools
Modal Response of a Flexible Rotor in Fluid-Film Bearings
J. Eng. Ind. May 1974, 96(2): 525–533.
doi: https://doi.org/10.1115/1.3438360
Topics:
Bearings
,
Fluid films
,
Rotors
,
Transients (Dynamics)
,
Compressors
,
Eigenvalues
,
Excitation
,
Mode shapes
,
Shock (Mechanics)
Analysis of a Multi-Layered Spherical Head Impact Model
J. Eng. Ind. May 1974, 96(2): 534–540.
doi: https://doi.org/10.1115/1.3438361
Vibration Characteristics of the Printed-Circuit Motor
J. Eng. Ind. May 1974, 96(2): 541–546.
doi: https://doi.org/10.1115/1.3438362
Topics:
Circuits
,
Engines
,
Motors
,
Vibration
,
Composite materials
,
Damping
,
Design
,
Energy dissipation
,
Glass reinforced plastics
,
Manufacturing
Vibration of Cylindrical Structures Induced by Axial Flow
J. Eng. Ind. May 1974, 96(2): 547–552.
doi: https://doi.org/10.1115/1.3438363
Topics:
Axial flow
,
Vibration
,
Flow (Dynamics)
,
Cylinders
,
Analytical methods
Diffractographic Techniques for Vibration Measurement
J. Eng. Ind. May 1974, 96(2): 553–556.
doi: https://doi.org/10.1115/1.3438364
Topics:
Vibration measurement
,
Diffraction
Stick-Slip Motion of Machine Tool Slideway
J. Eng. Ind. May 1974, 96(2): 557–566.
doi: https://doi.org/10.1115/1.3438365
Topics:
Machine tools
,
Stick-slip
,
Boundary-value problems
,
Sliding friction
,
Stiction
Gearbox Noise Reduction: Prediction and Measurement of Mesh-Frequency Vibrations Within an Operating Helicopter Rotor-Drive Gearbox
J. Eng. Ind. May 1974, 96(2): 567–577.
doi: https://doi.org/10.1115/1.3438366
Topics:
Mechanical drives
,
Noise control
,
Rotors
,
Vibration
,
Analytical methods
,
Acoustics
,
Army
,
Design
,
Excitation
,
Gears
Dynamic Tooth Loads in Epicyclic Gears
J. Eng. Ind. May 1974, 96(2): 578–584.
doi: https://doi.org/10.1115/1.3438367
Topics:
Planetary gears
,
Stress
On the Stability of Porous Journal Bearings
J. Eng. Ind. May 1974, 96(2): 585–590.
doi: https://doi.org/10.1115/1.3438368
Topics:
Journal bearings
,
Stability
,
Approximation
,
Bearings
,
Design
,
Nonlinear differential equations
,
Simulation
Dynamic Response of Pipes Transporting Fluids
J. Eng. Ind. May 1974, 96(2): 591–596.
doi: https://doi.org/10.1115/1.3438369
Topics:
Aluminum tube
,
Dynamic response
,
Errors
,
Flow (Dynamics)
,
Fluids
,
Modeling
,
Pipes
,
Tension
Nonlinear Truck Ride Analysis
J. Eng. Ind. May 1974, 96(2): 597–602.
doi: https://doi.org/10.1115/1.3438370
Topics:
Trucks
,
Computers
,
Damping
,
Deflection
,
Dry friction
,
Nonlinear equations
,
Shapes
,
Shock absorbers
,
Vibration
,
Wheels
Sinusoidal Response of Composite-Material Plates With Material Damping
J. Eng. Ind. May 1974, 96(2): 603–610.
doi: https://doi.org/10.1115/1.3438371
Topics:
Composite materials
,
Damping
,
Plates (structures)
,
Fibers
,
Anisotropy
,
Boron
,
Epoxy adhesives
,
Epoxy resins
,
Excitation
,
Inertia (Mechanics)
Hydrodynamic Mass Matrix for a Multibodied System
J. Eng. Ind. May 1974, 96(2): 611–618.
doi: https://doi.org/10.1115/1.3438372
Topics:
Flow (Dynamics)
,
Fluid dynamics
,
Solids
Vibration Control Using Semi-Active Force Generators
J. Eng. Ind. May 1974, 96(2): 619–626.
doi: https://doi.org/10.1115/1.3438373
Topics:
Generators
,
Vibration control
,
Computer simulation
,
Feedback
,
Hardware
,
Servomechanisms
,
Signals
,
Vibration
Synthesis of Solid Elastic Horns
J. Eng. Ind. May 1974, 96(2): 627–632.
doi: https://doi.org/10.1115/1.3438374
Topics:
Computer software
,
Design methodology
,
Transfer functions
Experimental Evaluation of the Exact Point-Speed and Least-Squares Procedures for Flexible Rotor Balancing by the Influence Coefficient Method
J. Eng. Ind. May 1974, 96(2): 633–643.
doi: https://doi.org/10.1115/1.3438375
Topics:
Bearings
,
Computer software
,
Machinery
,
Probes
,
Rotor balancing
,
Rotors
,
Testing
Penetration Rates and Stability of Motions of a Harmonically Forced Fore-Aft Vibrating Plow
J. Eng. Ind. May 1974, 96(2): 653–658.
doi: https://doi.org/10.1115/1.3438377
Topics:
Stability
,
Soil
,
Blades
,
Machinery
,
Skin friction (Fluid dynamics)
,
Steady state
A Rotor-Fixed Modal Simulation Model for Flexible Rotating Equipment
J. Eng. Ind. May 1974, 96(2): 659–669.
doi: https://doi.org/10.1115/1.3438378
Topics:
Rotors
,
Simulation models
,
Deflection
,
Whirls
,
Damping
,
Dynamic analysis
,
Elasticity
,
Engines
,
Modeling
,
Space vehicles
Nonlinear Stability Analysis of Chatter in Metal Cutting
J. Eng. Ind. May 1974, 96(2): 670–675.
doi: https://doi.org/10.1115/1.3438379
Topics:
Chatter
,
Metal cutting
,
Stability
,
Cutting
,
Oscillations
,
Machine tools
,
Nonlinear equations
,
Theoretical analysis
A New Random Data Description and Its Use in Transferring Road Roughness to Vehicle Response
J. Eng. Ind. May 1974, 96(2): 676–679.
doi: https://doi.org/10.1115/1.3438380
Topics:
Roads
,
Surface roughness
,
Vehicles
,
Spectral energy distribution
,
Probability
,
Signals
,
Transfer functions
Transient Response of Rotor-Bearing Systems
J. Eng. Ind. May 1974, 96(2): 682–690.
doi: https://doi.org/10.1115/1.3438383
Topics:
Bearings
,
Rotors
,
Transients (Dynamics)
,
Simulation
,
Disks
,
Equations of motion
,
Equipment performance
,
Excitation
,
Internal friction
,
Numerical analysis
Discussions
Discussion: “A New Random Data Description and Its Use in Transferring Road Roughness to Vehicle Response” (Wambold, J. C., Park, W. H., and Vashlishan, R. G., 1974, ASME J. Eng. Ind., 96, pp. 676–679)
J. Eng. Ind. May 1974, 96(2): 680–681.
doi: https://doi.org/10.1115/1.3438381
Topics:
Roads
,
Surface roughness
,
Vehicles
Discussion: “Transient Response of Rotor-Bearing Systems” (Kirk, R. G., and Gunter, E. J., 1974, ASME J. Eng. Ind., 96, pp. 682–690)
J. Eng. Ind. May 1974, 96(2): 690–692.
doi: https://doi.org/10.1115/1.3438384
Topics:
Bearings
,
Rotors
,
Transients (Dynamics)
Closure to “Discussion of ‘Transient Response of Rotor-Bearing Systems’” (1974, ASME J. Eng. Ind., 96, pp. 690–692)
J. Eng. Ind. May 1974, 96(2): 692–693.
doi: https://doi.org/10.1115/1.3438385
Topics:
Bearings
,
Rotors
,
Transients (Dynamics)
Discussion: “Necessary and Sufficient Existence Criteria of Overconstrained Five-Link Spatial Mechanisms With Helical, Cylinder, Revolute, and Prism Pairs” (Pamidi, P. R., Soni, A. H., and Dukkipati, R. V., 1973, ASME J. Eng. Ind., 95, pp. 737–743)
J. Eng. Ind. May 1974, 96(2): 699.
doi: https://doi.org/10.1115/1.3438388
Topics:
Cylinders
Closure to “Discussion of ‘Necessary and Sufficient Existence Criteria of Overconstrained Five-Link Spatial Mechanisms With Helical, Cylinder, Revolute, and Prism Pairs’” (1974, ASME J. Eng. Ind., 96, p. 699)
J. Eng. Ind. May 1974, 96(2): 699–700.
doi: https://doi.org/10.1115/1.3438389
Topics:
Cylinders
Discussion: “Stability and Kinematic Accuracy of Hydraulic Copying Mechanisms in Metal Cutting” (Mansour, W. M., Osman, M. O. M., and Gladwell, G. M. L., 1973, ASME J. Eng. Ind., 95, pp. 787–793)
J. Eng. Ind. May 1974, 96(2): 702–703.
doi: https://doi.org/10.1115/1.3438394
Topics:
Kinematics
,
Metal cutting
,
Stability
Closure to “Discussion of ‘Stability and Kinematic Accuracy of Hydraulic Copying Mechanisms in Metal Cutting’” (1974, ASME J. Eng. Ind., 96, pp. 702–703)
J. Eng. Ind. May 1974, 96(2): 703.
doi: https://doi.org/10.1115/1.3438395
Topics:
Kinematics
,
Metals
,
Stability
Discussion: “Investigation of Pulse Tube Refrigeration” (Narayankhedkar, K. G., and Mane, V. D., 1973, ASME J. Eng. Ind., 95, pp. 373–378)
J. Eng. Ind. May 1974, 96(2): 703–704.
doi: https://doi.org/10.1115/1.3438396
Topics:
Refrigeration
Closure to “Discussion of ‘Investigation of Pulse Tube Refrigeration’” (1974, ASME J. Eng. Ind., 96, pp. 703–704)
J. Eng. Ind. May 1974, 96(2): 704.
doi: https://doi.org/10.1115/1.3438397
Technical Briefs
Deflections in Radially Loaded Thin Elastic Rings
J. Eng. Ind. May 1974, 96(2): 694–697.
doi: https://doi.org/10.1115/1.3438386
Topics:
Deflection
,
Stress
,
Computers
,
Deformation
An Extension of the Holzer Method for Redundant Drive Trains
J. Eng. Ind. May 1974, 96(2): 697–698.
doi: https://doi.org/10.1115/1.3438387
Topics:
Trains
,
Errors
,
Mode shapes
Email alerts
RSS Feeds
A Novel Diagnostic Tool for Human-Centric Quality Monitoring in Human–Robot Collaboration Manufacturing
J. Manuf. Sci. Eng (December 2023)