Skip Nav Destination
Issues
April 2021
ISSN 1087-1357
EISSN 1528-8935
In this Issue
Editorial
Reviewer’s Recognition
J. Manuf. Sci. Eng. April 2021, 143(4): 040201.
doi: https://doi.org/10.1115/1.4049630
Review Article
Manufacturing of Nanocomposites via Powder Injection Molding: Focusing on Thermal Management Systems—A Review
J. Manuf. Sci. Eng. April 2021, 143(4): 040801.
doi: https://doi.org/10.1115/1.4048454
Topics:
Heat sinks
,
Injection molding
,
Manufacturing
,
Nanocomposites
,
Nanoparticles
,
Thermal management
,
Feedstock
,
Sintering
,
Metals
Research Papers
Study of Overlapping Adjacent Jets for Effective Laser-Induced Forward Transfer Printing
J. Manuf. Sci. Eng. April 2021, 143(4): 041001.
doi: https://doi.org/10.1115/1.4048440
Dynamic Metal Transfer Behavior in Double-Wire DP-GMAW of Aluminum Alloy Under Different Pulse Phases
J. Manuf. Sci. Eng. April 2021, 143(4): 041002.
doi: https://doi.org/10.1115/1.4048439
Topics:
Drops
,
Gas metal arc welding
,
Metals
,
Wire
,
Welding
A Mathematical Model to Describe the Inner Contour of Moineau Stators
J. Manuf. Sci. Eng. April 2021, 143(4): 041003.
doi: https://doi.org/10.1115/1.4048437
Topics:
Cutting
,
Drilling
,
Kinematics
,
Machining
,
Stators
,
Motors
,
Pumps
,
Design
,
Laplace transforms
,
Optimization
Finite Element Modeling of Electromagnetic Crimping of Cu-SS Tube-to-Tube Joint Along With Simulation of Destructive Testing for Strength Prediction of the Joint
J. Manuf. Sci. Eng. April 2021, 143(4): 041004.
doi: https://doi.org/10.1115/1.4048431
Topics:
Copper
,
Deformation
,
Finite element analysis
,
Modeling
,
Simulation
,
Simulation models
,
Testing
,
Magnetic fields
Surface Textured Drill Tools—An Effective Approach for Minimizing Chip Evacuation Force and Burr Formation During High Aspect Ratio Machining of Titanium Alloy
J. Manuf. Sci. Eng. April 2021, 143(4): 041005.
doi: https://doi.org/10.1115/1.4048432
Topics:
Cutting
,
Drilling
,
Drills (Tools)
,
Evacuations
,
Machining
,
Thrust
,
Titanium alloys
,
Torque
,
Fluids
,
Texture (Materials)
Cosine Error-Free Metrology Tool Path Planning for Thickness Profile Measurements
J. Manuf. Sci. Eng. April 2021, 143(4): 041006.
doi: https://doi.org/10.1115/1.4048433
Topics:
Errors
,
Metrology
,
Path planning
,
Sensors
,
Uncertainty
Curing of Glass Fiber/Epoxy Resin Composites Using Multiwalled Carbon Nanotubes Buckypaper as a Resistive Element
J. Manuf. Sci. Eng. April 2021, 143(4): 041007.
doi: https://doi.org/10.1115/1.4048512
Assessment of a Novel Position Verification Sensor to Identify and Isolate Robot Workcell Health Degradation
J. Manuf. Sci. Eng. April 2021, 143(4): 041008.
doi: https://doi.org/10.1115/1.4048446
Topics:
Manufacturing
,
Robots
,
Sensors
,
Testing
,
National Institute of Standards and Technology
On the Steady-State Workpiece Flow Mechanism and Force Prediction Considering Piled-Up Effect and Dead Metal Zone Formation
J. Manuf. Sci. Eng. April 2021, 143(4): 041009.
doi: https://doi.org/10.1115/1.4048952
Topics:
Cutting
,
Flow (Dynamics)
,
Separation (Technology)
,
Simulation
,
Metals
,
Tribology
,
Friction
A Data-Driven Machining Error Analysis Method for Finish Machining of Assembly Interfaces of Large-Scale Components
J. Manuf. Sci. Eng. April 2021, 143(4): 041010.
doi: https://doi.org/10.1115/1.4048955
Topics:
Errors
,
Machining
,
Manufacturing
,
Error analysis
,
Cutting
,
Finishes
Deep Learning-Based Data Fusion Method for In Situ Porosity Detection in Laser-Based Additive Manufacturing
J. Manuf. Sci. Eng. April 2021, 143(4): 041011.
doi: https://doi.org/10.1115/1.4048957
Topics:
Data fusion
,
Porosity
,
Pyrometers
,
Lasers
,
Additive manufacturing
A Novel Method of Blade-Inclined Ultrasonic Cutting Nomex Honeycomb Core With Straight Blade
J. Manuf. Sci. Eng. April 2021, 143(4): 041012.
doi: https://doi.org/10.1115/1.4049475
Topics:
Blades
,
Cutting
,
Honeycomb structures
,
Machining
,
Geometry
Fiber-Filled Hybrid Hydrogel for Bio-Manufacturing
J. Manuf. Sci. Eng. April 2021, 143(4): 041013.
doi: https://doi.org/10.1115/1.4049479
Topics:
Hydrogels
,
Inks
,
Manufacturing
,
Printing
,
Shapes
,
Ceramic matrix composites
,
Rheology
,
Extruding
,
Viscosity
,
Pressure
Email alerts
RSS Feeds
Femtosecond Laser Two-Step Rotary Drilling Method for SiCf/SiC Composites
J. Manuf. Sci. Eng (March 2025)
In-Situ Monitoring and Its Correlation to Mechanical Properties in Additively Manufactured 718 Ni Alloy
J. Manuf. Sci. Eng (March 2025)
NoodlePrint: Cooperative Multi-Robot Additive Manufacturing With Helically Interlocked Tiles
J. Manuf. Sci. Eng (June 2025)