Topics: Cutting , Engineering simulation , Failure , Fracture (Materials) , Fracture (Process) , Laser cutting , Lasers , Probability , Simulation , Stress

Process Yield Improvement Through Optimum Design of Fixture Layouts in 3D Multistation Assembly Systems

T. Phoomboplab, D. Ceglarek

J. Manuf. Sci. Eng. December 2008, 130(6): 061005. doi: https://doi.org/10.1115/1.2977826

Abstract

View articletitled, Process Yield Improvement Through Optimum Design of Fixture Layouts in 3D Multistation Assembly Systems

Open the PDF for in another window

Topics: Design , Manufacturing

Robust Machine Tool Thermal Error Modeling Through Thermal Mode Concept

Jie Zhu, Jun Ni, Albert J. Shih

J. Manuf. Sci. Eng. December 2008, 130(6): 061006. doi: https://doi.org/10.1115/1.2976148

Abstract

View articletitled, Robust Machine Tool Thermal Error Modeling Through Thermal Mode Concept

Open the PDF for in another window

Topics: Errors , Machine tools , Modeling , Temperature sensors , Temperature

Prediction of Form Errors in Rings of Nonuniform Cross Section Due to Workholding and Machining Loads

Christopher L. Golden, Shreyes N. Melkote

J. Manuf. Sci. Eng. December 2008, 130(6): 061007. doi: https://doi.org/10.1115/1.2982274

Abstract

View articletitled, Prediction of Form Errors in Rings of Nonuniform Cross Section Due to Workholding and Machining Loads

Open the PDF for in another window

Topics: Cutting , Deflection , Errors , Finite element analysis , Finite element model , Machining , Stress , Deformation , Pressure , Force measurement

Mist-Abrasion Machining of Brittle Material and Its Application in Corrective Figuring of Optical Parts

H. Amirabadi, M. Shakeri, O. Horiuchi, J. Imen

J. Manuf. Sci. Eng. December 2008, 130(6): 061008. doi: https://doi.org/10.1115/1.2927452

Abstract

View articletitled, Mist-Abrasion Machining of Brittle Material and Its Application in Corrective Figuring of Optical Parts

Open the PDF for in another window

Topics: Abrasion , Machining , Brittleness , Nozzles , Polishing

Analytical Modeling of Metal Transfer for GMAW in the Globular Mode

U. Ersoy, E. Kannatey-Asibu, S. J. Hu

J. Manuf. Sci. Eng. December 2008, 130(6): 061009. doi: https://doi.org/10.1115/1.3006317

Abstract

View articletitled, Analytical Modeling of Metal Transfer for GMAW in the Globular Mode

Open the PDF for in another window

Topics: Cycles , Gas metal arc welding , Metals , Modeling , Oscillations , Welding , Wire , Springs

Development of Metal Embedded Microsensors by Diffusion Bonding and Testing in Milling Process

Xudong Cheng, Xiaochun Li

J. Manuf. Sci. Eng. December 2008, 130(6): 061010. doi: https://doi.org/10.1115/1.3006318

Abstract

View articletitled, Development of Metal Embedded Microsensors by Diffusion Bonding and Testing in Milling Process

Open the PDF for in another window

Topics: Cutting , Diffusion bonding (Metals) , Manufacturing , Microsensors , Milling , Sensors , Strain gages , Temperature , Thin films , Metals

Design and Implementation of Nonlinear Force Controllers for Friction Stir Welding Processes

Xin Zhao, Prabhanjana Kalya, Robert G. Landers, K. Krishnamurthy

J. Manuf. Sci. Eng. December 2008, 130(6): 061011. doi: https://doi.org/10.1115/1.3006326

Abstract

View articletitled, Design and Implementation of Nonlinear Force Controllers for Friction Stir Welding Processes

Open the PDF for in another window

Topics: Control equipment , Design , Welding , Friction , Force control , Rotation , Polynomials

A Singular Value Decomposition Approach to Similarity Evaluation Between Servo Loops of CNC Machine Tools

Zhixiang Xu, Tim Green

J. Manuf. Sci. Eng. December 2008, 130(6): 061012. doi: https://doi.org/10.1115/1.3010713

Abstract

View articletitled, A Singular Value Decomposition Approach to Similarity Evaluation Between Servo Loops of CNC Machine Tools

Open the PDF for in another window

Topics: Computer numerical control machine tools , Interpolation , Servomechanisms , Time series , Machinery , Attractors , Machine tools

Workpiece Positioning Analyses: The Exact Solutions and a Quadratic Variation Approximation Using the Method of Moments

Jun Cao, Xinmin Lai, Wayne Cai, Sun Jin, Zhongqin Lin

J. Manuf. Sci. Eng. December 2008, 130(6): 061013. doi: https://doi.org/10.1115/1.2976147

Abstract

View articletitled, Workpiece Positioning Analyses: The Exact Solutions and a Quadratic Variation Approximation Using the Method of Moments

Open the PDF for in another window

Topics: Algorithms , Approximation , Errors , Method of moments , Monte Carlo methods , Simulation

Numerical Analysis on the Feasibility of Laser Microwelding of Metals by Femtosecond Laser Pulses Using ABAQUS

Dongkyun Lee, Elijah Kannatey-Asibu, Jr.

J. Manuf. Sci. Eng. December 2008, 130(6): 061014. doi: https://doi.org/10.1115/1.3006321

Abstract

View articletitled, Numerical Analysis on the Feasibility of Laser Microwelding of Metals by Femtosecond Laser Pulses Using <span class="small-caps">ABAQUS</span>

Open the PDF for in another window

Topics: Lasers , Metals , Temperature , Electrons , Ablation (Vaporization technology) , Fluence (Radiation measurement) , Materials properties

Dynamic Simulations of Alumina Membrane Fouling From Recycling of Semisynthetic Metalworking Fluids

John E. Wentz, Shiv G. Kapoor, Richard E. DeVor, N. Rajagopalan

J. Manuf. Sci. Eng. December 2008, 130(6): 061015. doi: https://doi.org/10.1115/1.2976149

Abstract

View articletitled, Dynamic Simulations of Alumina Membrane Fouling From Recycling of Semisynthetic Metalworking Fluids

Open the PDF for in another window

Topics: Flow (Dynamics) , Membranes , Particulate matter , Simulation , Particle size , Shear (Mechanics)

Technical Briefs

Study on Site-Selective Growth of Carbon Nanotubes and Diamond Films With Barrier Layers

Chun-Hsi Su, Chii-Ruey Lin, Guo-Tsai Liau, Ching-Yu Chang

J. Manuf. Sci. Eng. December 2008, 130(6): 064501. doi: https://doi.org/10.1115/1.2976120

Abstract

View articletitled, Study on Site-Selective Growth of Carbon Nanotubes and Diamond Films With Barrier Layers

Open the PDF for in another window

Topics: Carbon nanotubes , Diamond films , Electron field emission , Microwaves , Chemical vapor deposition

Fuzzy Logic Control of Microhole Electrical Discharge Machining

Chen-Chun Kao, Albert J. Shih, Scott F. Miller

J. Manuf. Sci. Eng. December 2008, 130(6): 064502. doi: https://doi.org/10.1115/1.2977827

Abstract

View articletitled, Fuzzy Logic Control of Microhole Electrical Discharge Machining

Open the PDF for in another window

Topics: Control equipment , Drilling , Electrical discharge machining , Fuzzy logic

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

ADDOPT: An Additive Manufacturing Optimal Control Framework Demonstrated in Minimizing Layer-Level Thermal Variance in Electron Beam Powder Bed Fusion

J. Manuf. Sci. Eng (April 2025)

A Differentiable Physics-Informed Machine Learning Approach to Model Laser-Based Micro-Manufacturing Process

J. Manuf. Sci. Eng (May 2025)

Additive Manufacturing of Wheat Straw Fibers for Sustainable Thermal Insulation Application

J. Manuf. Sci. Eng (May 2025)

Repurposing Supply Chains and Process Planning Across Products Using a Similarity Model Based on Supernetworks

J. Manuf. Sci. Eng (May 2025)

Flexible Tooling Enabled by the Electromagnetics With Discrete Blank Holding Force: Short-Time Pulse Control and Forming Validation

J. Manuf. Sci. Eng (May 2025)

Research Papers

An Experimental Study on Nonisothermal Deep Drawing Process Using Aluminum and Magnesium Alloys

Near-Net-Shape Manufacturing of Short Fiber Composite Parts via Discrete Depositions

Formability Analysis of Magnesium Alloy Sheets at Elevated Temperatures With Experimental and Numerical Method

Active Stressing and the Micromanipulation of Stress-States for Delaying Fracture During Unsupported Laser Cutting

Process Yield Improvement Through Optimum Design of Fixture Layouts in 3D Multistation Assembly Systems

Robust Machine Tool Thermal Error Modeling Through Thermal Mode Concept

Prediction of Form Errors in Rings of Nonuniform Cross Section Due to Workholding and Machining Loads

Mist-Abrasion Machining of Brittle Material and Its Application in Corrective Figuring of Optical Parts

Analytical Modeling of Metal Transfer for GMAW in the Globular Mode

Development of Metal Embedded Microsensors by Diffusion Bonding and Testing in Milling Process

Design and Implementation of Nonlinear Force Controllers for Friction Stir Welding Processes

A Singular Value Decomposition Approach to Similarity Evaluation Between Servo Loops of CNC Machine Tools

Workpiece Positioning Analyses: The Exact Solutions and a Quadratic Variation Approximation Using the Method of Moments

Numerical Analysis on the Feasibility of Laser Microwelding of Metals by Femtosecond Laser Pulses Using ABAQUS

Dynamic Simulations of Alumina Membrane Fouling From Recycling of Semisynthetic Metalworking Fluids

Technical Briefs

Study on Site-Selective Growth of Carbon Nanotubes and Diamond Films With Barrier Layers

Fuzzy Logic Control of Microhole Electrical Discharge Machining

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only