Volume 127 Issue 2 | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 127, Issue 2

May 2005

ISSN 1087-1357

EISSN 1528-8935

Technical Papers

Analysis of the Cutting Force Components and Friction in High Speed Machining

G. Sutter, A. Molinari

J. Manuf. Sci. Eng. May 2005, 127(2): 245–250. doi: https://doi.org/10.1115/1.1863253

Abstract

View articletitled, Analysis of the Cutting Force Components and Friction in High Speed Machining

Open the PDF for in another window

Topics: Cutting , Friction , High speed machining

An Experimental Study of Cutting Forces in High-Speed End Milling and Implications for Dynamic Force Modeling

P. T. Mativenga, Lecturer, K. K. B. Hon, Professor

J. Manuf. Sci. Eng. May 2005, 127(2): 251–261. doi: https://doi.org/10.1115/1.1863254

Abstract

View articletitled, An Experimental Study of Cutting Forces in High-Speed End Milling and Implications for Dynamic Force Modeling

Open the PDF for in another window

Topics: Cutting , Machining , Milling , Modeling

Modeling of Cutting Forces Under Hard Turning Conditions Considering Tool Wear Effect

Yong Huang, Assistant Professor,, Steven Y. Liang, Professor,

J. Manuf. Sci. Eng. May 2005, 127(2): 262–270. doi: https://doi.org/10.1115/1.1852571

Abstract

View articletitled, Modeling of Cutting Forces Under Hard Turning Conditions Considering Tool Wear Effect

Open the PDF for in another window

Topics: Cutting , Turning , Wear , Modeling

Frequency Shift in Drilling due to Margin Engagement

D. N. Dilley, D. A. Stephenson, P. V. Bayly, Associate Professor, A. J. Schaut

J. Manuf. Sci. Eng. May 2005, 127(2): 271–276. doi: https://doi.org/10.1115/1.1863255

Abstract

View articletitled, Frequency Shift in Drilling due to Margin Engagement

Open the PDF for in another window

Topics: Chatter , Cutting , Drilling , Drills (Tools) , Springs , Stiffness , Vibration , Dynamics (Mechanics) , Displacement , Modal analysis

Binderless CBN Tools, a Breakthrough for Machining Titanium Alloys

A. Rahmath Zareena, M. Rahman, Y. S. Wong

J. Manuf. Sci. Eng. May 2005, 127(2): 277–279. doi: https://doi.org/10.1115/1.1852570

Abstract

View articletitled, Binderless CBN Tools, a Breakthrough for Machining Titanium Alloys

Open the PDF for in another window

Topics: Cutting , Machining , Titanium alloys , Wear , Cutting tools , Surface roughness

Dynamics of Initial Penetration in Drilling: Part 1—Mechanistic Model for Dynamic Forces

Yongping Gong, Cheng Lin, Kornel F. Ehmann

J. Manuf. Sci. Eng. May 2005, 127(2): 280–288. doi: https://doi.org/10.1115/1.1852569

Abstract

View articletitled, Dynamics of Initial Penetration in Drilling: Part 1—Mechanistic Model for Dynamic Forces

Open the PDF for in another window

Topics: Cutting , Drilling , Drills (Tools)

Dynamics of Initial Penetration in Drilling: Part 2—Motion Models for Drill Skidding and Wandering With Experimental Verification

Yongping Gong, Cheng Lin, Kornel F. Ehmann

J. Manuf. Sci. Eng. May 2005, 127(2): 289–297. doi: https://doi.org/10.1115/1.1852568

Abstract

View articletitled, Dynamics of Initial Penetration in Drilling: Part 2—Motion Models for Drill Skidding and Wandering With Experimental Verification

Open the PDF for in another window

Topics: Drilling , Drills (Tools) , Rotation

Topology of Spade Drills for Wood Drilling Operations, Part 1: Spade Drill Point Geometry Definition

Hanxin Zhao, Kornel F. Ehmann

J. Manuf. Sci. Eng. May 2005, 127(2): 298–309. doi: https://doi.org/10.1115/1.1794160

Abstract

View articletitled, Topology of Spade Drills for Wood Drilling Operations, Part 1: Spade Drill Point Geometry Definition

Open the PDF for in another window

Topics: Cutting , Generators , Geometry , Bits (Tools) , Drills (Tools)

Topology of Spade Drills for Wood Drilling Operations Part 2: Spade Drill Point Cutting Geometry Analysis

Hanxin Zhao, Kornel F. Ehmann

J. Manuf. Sci. Eng. May 2005, 127(2): 310–318. doi: https://doi.org/10.1115/1.1794161

Abstract

View articletitled, Topology of Spade Drills for Wood Drilling Operations Part 2: Spade Drill Point Cutting Geometry Analysis

Open the PDF for in another window

Topics: Cutting , Clearances (Engineering) , Chisels , Drills (Tools)

Parameterized Geometric Design for Complex Helical Drill Point

Wei Zhang, Fengbao He, Dilin Xiong

J. Manuf. Sci. Eng. May 2005, 127(2): 319–327. doi: https://doi.org/10.1115/1.1794162

Abstract

View articletitled, Parameterized Geometric Design for Complex Helical Drill Point

Open the PDF for in another window

Topics: Chisels , Clearances (Engineering) , Drills (Tools) , Grinding , Design , Cutting

On a Novel Tool Life Relation for Precision Cutting Tools

A. G. Mamalis, J. Kundra´k, M. Horva´th

J. Manuf. Sci. Eng. May 2005, 127(2): 328–332. doi: https://doi.org/10.1115/1.1794158

Abstract

View articletitled, On a Novel Tool Life Relation for Precision Cutting Tools

Open the PDF for in another window

Topics: Cutting , Wear , Cutting tools , Machining

Microscale Mechanical Behavior of the Subsurface by Finishing Processes

Y. B. Guo, A. W. Warren

J. Manuf. Sci. Eng. May 2005, 127(2): 333–338. doi: https://doi.org/10.1115/1.1807853

Abstract

View articletitled, Microscale Mechanical Behavior of the Subsurface by Finishing Processes

Open the PDF for in another window

Topics: Fatigue , Finishing , Grinding , Machining , Mechanical behavior , Microscale devices , Steel , Stress , Testing , Turning

Quintic Spline Interpolation With Minimal Feed Fluctuation

Kaan Erkorkmaz, Assistant Professor, Yusuf Altintas, Professor, ASME Fellow

J. Manuf. Sci. Eng. May 2005, 127(2): 339–349. doi: https://doi.org/10.1115/1.1830493

Abstract

View articletitled, Quintic Spline Interpolation With Minimal Feed Fluctuation

Open the PDF for in another window

Topics: Interpolation , Splines , Polynomials

Characterization of the Quasi-static Deformation of LAAG Joints Adhering Machined Steel Surfaces

Edward C. De Meter, Professor,

J. Manuf. Sci. Eng. May 2005, 127(2): 350–357. doi: https://doi.org/10.1115/1.1807851

Abstract

View articletitled, Characterization of the Quasi-static Deformation of LAAG Joints Adhering Machined Steel Surfaces

Open the PDF for in another window

Topics: Adhesives , Grippers , Shear (Mechanics) , Ductility , Steel , Deformation , Adhesive joints , Stress , Hardening (Curing)

Assembly Fixture Fault Diagnosis Using Designated Component Analysis

Y. G. Liu, S. J. Hu

J. Manuf. Sci. Eng. May 2005, 127(2): 358–368. doi: https://doi.org/10.1115/1.1852572

Abstract

View articletitled, Assembly Fixture Fault Diagnosis Using Designated Component Analysis

Open the PDF for in another window

Topics: Eigenvalues , Failure , Fault diagnosis , Manufacturing , Deflection , Sheet metal , Principal component analysis , Statistical analysis

Deformation Analysis of Side-Wall Curl in the Sheet-Metal Forming of Flanged Channels

Fuh-Kuo Chen, Professor, Pao-Ching Tseng, Graduate Student

J. Manuf. Sci. Eng. May 2005, 127(2): 369–375. doi: https://doi.org/10.1115/1.1794163

Abstract

View articletitled, Deformation Analysis of Side-Wall Curl in the Sheet-Metal Forming of Flanged Channels

Open the PDF for in another window

Topics: Deformation , Finite element analysis , Sheet metal , Sheet metal work , Engineering simulation , Simulation , Friction , Blanks

Condition Monitoring Using a Latent Process Model with an Application to Sheet Metal Stamping Processes

Xiaoli Li, Professor, R. Du, Professor

J. Manuf. Sci. Eng. May 2005, 127(2): 376–385. doi: https://doi.org/10.1115/1.1870015

Abstract

View articletitled, Condition Monitoring Using a Latent Process Model with an Application to Sheet Metal Stamping Processes

Open the PDF for in another window

Topics: Condition monitoring , Metal stamping , Signals , Sheet metal

Modeling the Rolling of Ribbed Strip by a 3D Rigid Viscoplastic FEM

Z. Y. Jiang, A. K. Tieu, Mem. ASME

J. Manuf. Sci. Eng. May 2005, 127(2): 386–393. doi: https://doi.org/10.1115/1.1794159

Abstract

View articletitled, Modeling the Rolling of Ribbed Strip by a 3D Rigid Viscoplastic FEM

Open the PDF for in another window

Topics: Deformation , Finite element methods , Friction , Strips , Torque , Simulation , Modeling , Boundary-value problems

Wheel-Tooling Gap Measurement System for Conform™ Extrusion Machinery Based on a Capacitive Sensor

K. Khawaja, L. Seneviratne, Professor, K. Althoefer

J. Manuf. Sci. Eng. May 2005, 127(2): 394–401. doi: https://doi.org/10.1115/1.1870004

Abstract

View articletitled, Wheel-Tooling Gap Measurement System for Conform™ Extrusion Machinery Based on a Capacitive Sensor

Open the PDF for in another window

Topics: Extruding , Machinery , Sensors , Wheels , Tooling

Localized Material and Processing Aspects Related to Enhanced Recycled Material Utilization Through Vibration-Assisted Injection Molding

Akihisa Kikuchi, John P. Coulter, David Angstadt, Ahmet Pinarbasi

J. Manuf. Sci. Eng. May 2005, 127(2): 402–410. doi: https://doi.org/10.1115/1.1870012

Abstract

View articletitled, Localized Material and Processing Aspects Related to Enhanced Recycled Material Utilization Through Vibration-Assisted Injection Molding

Open the PDF for in another window

Topics: Injection molding , Vibration , Molding , Recycled materials

The Effect of Adhesive Curing Condition on Bonding Strength in Auto Body Assembly

Xin Wu, Hongqi Hao

J. Manuf. Sci. Eng. May 2005, 127(2): 411–419. doi: https://doi.org/10.1115/1.1870014

Abstract

View articletitled, The Effect of Adhesive Curing Condition on Bonding Strength in Auto Body Assembly

Open the PDF for in another window

Topics: Adhesives , Bonding , Fracture (Materials) , Hardening (Curing) , Heating , Temperature , Fracture (Process)

Robot Path Planning for Dimensional Measurement in Automotive Manufacturing

Weihua Sheng, Ning Xi, Mumin Song, Yifan Chen

J. Manuf. Sci. Eng. May 2005, 127(2): 420–428. doi: https://doi.org/10.1115/1.1870013

Abstract

View articletitled, Robot Path Planning for Dimensional Measurement in Automotive Manufacturing

Open the PDF for in another window

Topics: Algorithms , Path planning , Robots , Inspection

Technical Brief

A Finite Element Analysis For Stiffness of Fixture Units

Y. Zheng,, Y. Rong, and, Z. Hou

J. Manuf. Sci. Eng. May 2005, 127(2): 429–432. doi: https://doi.org/10.1115/1.1871183

Abstract

View articletitled, A Finite Element Analysis For Stiffness of Fixture Units

Open the PDF for in another window

Topics: Finite element analysis , Stiffness , Springs , Design

Technical Papers

Analysis of the Cutting Force Components and Friction in High Speed Machining

An Experimental Study of Cutting Forces in High-Speed End Milling and Implications for Dynamic Force Modeling

Modeling of Cutting Forces Under Hard Turning Conditions Considering Tool Wear Effect

Frequency Shift in Drilling due to Margin Engagement

Binderless CBN Tools, a Breakthrough for Machining Titanium Alloys

Dynamics of Initial Penetration in Drilling: Part 1—Mechanistic Model for Dynamic Forces

Dynamics of Initial Penetration in Drilling: Part 2—Motion Models for Drill Skidding and Wandering With Experimental Verification

Topology of Spade Drills for Wood Drilling Operations, Part 1: Spade Drill Point Geometry Definition

Topology of Spade Drills for Wood Drilling Operations Part 2: Spade Drill Point Cutting Geometry Analysis

Parameterized Geometric Design for Complex Helical Drill Point

On a Novel Tool Life Relation for Precision Cutting Tools

Microscale Mechanical Behavior of the Subsurface by Finishing Processes

Quintic Spline Interpolation With Minimal Feed Fluctuation

Characterization of the Quasi-static Deformation of LAAG Joints Adhering Machined Steel Surfaces

Assembly Fixture Fault Diagnosis Using Designated Component Analysis

Deformation Analysis of Side-Wall Curl in the Sheet-Metal Forming of Flanged Channels

Condition Monitoring Using a Latent Process Model with an Application to Sheet Metal Stamping Processes

Modeling the Rolling of Ribbed Strip by a 3D Rigid Viscoplastic FEM

Wheel-Tooling Gap Measurement System for Conform™ Extrusion Machinery Based on a Capacitive Sensor

Localized Material and Processing Aspects Related to Enhanced Recycled Material Utilization Through Vibration-Assisted Injection Molding

The Effect of Adhesive Curing Condition on Bonding Strength in Auto Body Assembly

Robot Path Planning for Dimensional Measurement in Automotive Manufacturing

Technical Brief

A Finite Element Analysis For Stiffness of Fixture Units

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Technical Papers

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only