Skip Nav Destination
Issues
November 2004
ISSN 1087-1357
EISSN 1528-8935
In this Issue
Editorial
Micro/Meso-scale Manufacturing
J. Manuf. Sci. Eng. November 2004, 126(4): 641.
doi: https://doi.org/10.1115/1.1814125
Topics:
Manufacturing
,
Mechatronics
Technical Papers
Microforming: Experimental Investigation of the Extrusion Process for Micropins and its Numerical Simulation Using RKEM
J. Manuf. Sci. Eng. November 2004, 126(4): 642–652.
doi: https://doi.org/10.1115/1.1813468
Topics:
Extruding
,
Grain size
,
Surface roughness
,
Displacement
,
Dimensions
,
Computer simulation
Burr-Free Microblanking Using Piezoelectric Actuator
J. Manuf. Sci. Eng. November 2004, 126(4): 653–658.
doi: https://doi.org/10.1115/1.1812775
Development of Ultrafine Piercing By SiC Fiber Punch
J. Manuf. Sci. Eng. November 2004, 126(4): 659–665.
doi: https://doi.org/10.1115/1.1812776
Topics:
Fibers
The Mechanics of Machining at the Microscale: Assessment of the Current State of the Science
J. Manuf. Sci. Eng. November 2004, 126(4): 666–678.
doi: https://doi.org/10.1115/1.1813469
Topics:
Cutting
,
Machining
,
Micromachining
,
Deformation
,
Modeling
,
Size effect
,
Simulation
An Explanation for the Size-Effect in Machining Using Strain Gradient Plasticity
J. Manuf. Sci. Eng. November 2004, 126(4): 679–684.
doi: https://doi.org/10.1115/1.1688375
Topics:
Deformation
,
Density
,
Dislocations
,
Machining
,
Plasticity
,
Shear (Mechanics)
,
Shear strength
,
Size effect
,
Strain gradient
,
Modeling
On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part I: Surface Generation
Michael P. Vogler, Graduate Student, Richard E. DeVor, Professor, Fellow ASME, Shiv G. Kapoor, Professor, Fellow ASME
J. Manuf. Sci. Eng. November 2004, 126(4): 685–694.
doi: https://doi.org/10.1115/1.1813470
Topics:
Cutting
,
Ferrites (Magnetic materials)
,
Machining
,
Micromilling
,
Nodular iron
,
Simulation
,
Surface roughness
,
Modeling
,
Geometry
On the Modeling and Analysis of Machining Performance in Micro-Endmilling, Part II: Cutting Force Prediction
Michael P. Vogler, Graduate Student, Shiv G. Kapoor, Professor, Fellow ASME, Richard E. DeVor, Professor, Fellow ASME
J. Manuf. Sci. Eng. November 2004, 126(4): 695–705.
doi: https://doi.org/10.1115/1.1813471
Topics:
Cutting
,
Deformation
,
Ferrites (Magnetic materials)
,
Machining
,
Micromilling
,
Nodular iron
,
Simulation
,
Computation
,
Finite element analysis
,
Modeling
Mechanistic Cutting Process Calibration via Microstructure-Level Finite Element Simulation Model
Sunghyuk Park, Graduate Student, S. G. Kapoor, Professor, Fellow ASME, R. E. DeVor, Professor, Fellow ASME
J. Manuf. Sci. Eng. November 2004, 126(4): 706–709.
doi: https://doi.org/10.1115/1.1813480
Topics:
Calibration
,
Cutting
,
Graphite
,
Finite element analysis
,
Carbon steel
,
Machining
,
Nodular iron
A Static Model of Chip Formation in Microscale Milling
J. Manuf. Sci. Eng. November 2004, 126(4): 710–718.
doi: https://doi.org/10.1115/1.1813475
Topics:
Cutting
,
Microscale devices
,
Milling
,
Micromilling
The Drilling Vibration Behavior of a Twisted Microdrill
J. Manuf. Sci. Eng. November 2004, 126(4): 719–726.
doi: https://doi.org/10.1115/1.1813472
Topics:
Drilling
,
Drills (Tools)
,
Vibration
,
Thrust
Study of 3D Micro-Ultrasonic Machining
J. Manuf. Sci. Eng. November 2004, 126(4): 727–732.
doi: https://doi.org/10.1115/1.1813482
Topics:
Computer-aided design
,
Machining
,
Wear
,
Ultrasonic machining
,
Drilling
,
Vibration
,
Shapes
Scaling Issues in Miniaturization of Injection Molded Parts
J. Manuf. Sci. Eng. November 2004, 126(4): 733–739.
doi: https://doi.org/10.1115/1.1813479
Topics:
Cavities
,
Flow (Dynamics)
,
Injection molding
,
Molding
,
Polymers
,
Pressure
,
Freezing
,
Temperature
,
Size effect
,
Heat conduction
Systematical Characterization of Material Response to Microscale Laser Shock Peening
J. Manuf. Sci. Eng. November 2004, 126(4): 740–749.
doi: https://doi.org/10.1115/1.1811115
Modeling of Advanced Melting Zone for Manufacturing of Optical Fibers
J. Manuf. Sci. Eng. November 2004, 126(4): 750–759.
doi: https://doi.org/10.1115/1.1849032
Topics:
Furnaces
,
Glass
,
Manufacturing
,
Melting
,
Optical fiber
,
Preforms
,
Radiation (Physics)
,
Simulation
,
Temperature
,
Temperature gradient
Nanosurface Fabrication of Hard Brittle Materials by Structured Tool Imprinting
J. Manuf. Sci. Eng. November 2004, 126(4): 760–765.
doi: https://doi.org/10.1115/1.1813474
Topics:
Brittleness
,
Deformation
,
Diamond tools
,
Glass
,
Manufacturing
,
Quartz
,
Silicon
,
Stress
,
Semiconductor wafers
,
Ductile-brittle transition
Development of an Assembly-free Process Based on Virtual Environment for Fabricating 3D Microfluidic Systems Using Microstereolithography Technology
J. Manuf. Sci. Eng. November 2004, 126(4): 766–771.
doi: https://doi.org/10.1115/1.1811116
Topics:
Manufacturing
,
Microfluidics
,
Virtual reality
,
Blood
Surface Finishing and Evaluation of Three-Dimensional Silicon Microchannel Using Magnetorheological Fluid
J. Manuf. Sci. Eng. November 2004, 126(4): 772–778.
doi: https://doi.org/10.1115/1.1811113
Topics:
Finishing
,
Fluids
,
Microchannels
,
Silicon
,
Surface finishing
,
Surface roughness
Ceramic Micro/Nanoparticle Size Evolution in Wet Grinding in Stirred Ball Mill
J. Manuf. Sci. Eng. November 2004, 126(4): 779–786.
doi: https://doi.org/10.1115/1.1811117
Topics:
Ball mills
,
Fluids
,
Grinding
,
Nanoparticles
,
Particle size
,
Particulate matter
,
Viscosity
,
Ceramics
,
Ball milling
Deposition Technologies For Micromanufacturing: A Review
J. Manuf. Sci. Eng. November 2004, 126(4): 787–795.
doi: https://doi.org/10.1115/1.1811118
Topics:
Flow (Dynamics)
,
Lasers
,
Particulate matter
,
Manufacturing
A Simulation-based Correlation of Cross-Sectional Area of the Thin Film Produced by Laser Chemical Vapor Deposition With a Moving Laser Beam
J. Manuf. Sci. Eng. November 2004, 126(4): 796–800.
doi: https://doi.org/10.1115/1.1813478
Topics:
Chemical vapor deposition
,
Laser beams
,
Lasers
,
Simulation
,
Thin films
,
Shapes
Mechanical Approach to Nanomachining of Silicon Using Oxide Characteristics Based on Tribo Nanolithography (TNL) in KOH Solution
J. Manuf. Sci. Eng. November 2004, 126(4): 801–806.
doi: https://doi.org/10.1115/1.1811114
Topics:
Atomic force microscopy
,
Diamonds
,
Etching
,
Nanolithography
,
Silicon
,
Cantilevers
,
Corrosion resistance
Scanning Grating Microinterferometer for MEMS Metrology
Byungki Kim, Graduate Research Assistant, Michael C. Schmittdiel, Graduate Research Assistant, F. Levent Degertekin, Assistant Professor, Thomas R. Kurfess, Professor
J. Manuf. Sci. Eng. November 2004, 126(4): 807–812.
doi: https://doi.org/10.1115/1.1812773
Three Dimensional Imaging of LIGA-Made Microcomponents
Douglas Chinn, Peter Ostendorp, Mike Haugh, Russell Kershmann, Thomas Kurfess, Andre Claudet, Thomas Tucker
J. Manuf. Sci. Eng. November 2004, 126(4): 813–821.
doi: https://doi.org/10.1115/1.1812774
Topics:
Computer-aided design
,
Dimensions
,
Gears
,
Imaging
,
Metrology
,
Resolution (Optics)
,
Computer software
,
Nickel alloys
,
Algorithms
,
Image processing
Effects of Spherical Targets on Capacitive Displacement Measurements
J. Manuf. Sci. Eng. November 2004, 126(4): 822–829.
doi: https://doi.org/10.1115/1.1813476
Topics:
Capacitance
,
Electrodes
,
Finite element analysis
,
Sensors
,
Displacement measurement
Novel Sensor Fabrication Using Direct-Write Thermal Spray and Precision Laser Micromachining
J. Manuf. Sci. Eng. November 2004, 126(4): 830–836.
doi: https://doi.org/10.1115/1.1813481
Topics:
Lasers
,
Manufacturing
,
Micromachining
,
Sensors
,
Sprays
,
Strain gages
,
Temperature
,
Coatings
,
Rapid prototyping
,
Heating
Technical Briefs
Microfactory—Concept, History, and Developments
J. Manuf. Sci. Eng. November 2004, 126(4): 837–844.
doi: https://doi.org/10.1115/1.1823491
Topics:
Machinery
,
Manufacturing
,
Manufacturing systems
,
Milling machines
,
Machine tools
,
Machining
,
Industrial research
Effect of Fixture Compliance on Thermally Enhanced Edge Registration in Microlamination
J. Manuf. Sci. Eng. November 2004, 126(4): 845–848.
doi: https://doi.org/10.1115/1.1811112
Topics:
Bonding
,
Buckling
,
Microchannels
,
Temperature
,
Deflection
The Influence of Material Models on Finite Element Simulation of Machining
J. Manuf. Sci. Eng. November 2004, 126(4): 849–857.
doi: https://doi.org/10.1115/1.1813473
Topics:
Cutting
,
Finite element analysis
,
Machining
,
Simulation
,
Stress
,
Temperature
,
Modeling
,
Steel
,
Residual stresses
,
Flow (Dynamics)
Discussion
Comments on “Thermophysical-property-based selection of tool protective coatings for dry machining of steels” by Wit Grezesik et al., Journal of Manufacturing Science and Engineering., Nov. 2003, Vol. 125, pp. 689–695
J. Manuf. Sci. Eng. November 2004, 126(4): 858.
doi: https://doi.org/10.1115/1.1813477
Topics:
Machining
,
Manufacturing
,
Protective coatings
,
Steel
,
Thermal conductivity
,
Thermal diffusivity
Book Review
Tribology of Abrasive Machining Processes
J. Manuf. Sci. Eng. November 2004, 126(4): 859.
doi: https://doi.org/10.1115/1.1819313
Topics:
Abrasive machining
,
Grinding
,
Tribology
,
Abrasion
,
Machining
,
Molecular dynamics methods
,
Production equipment
Email alerts
RSS Feeds
A REVIEW OF ADVANCED ROLL-TO-ROLL MANUFACTURING: SYSTEM MODELING AND CONTROL
J. Manuf. Sci. Eng
Fatigue Scattering Analytics and Prediction of SS 316L Fabricated by Laser Powder Bed Fusion
J. Manuf. Sci. Eng (February 2025)