Volume 119 Issue 4A | J. Manuf. Sci. Eng.

Skip Nav Destination

Volume 119, Issue 4A

November 1997

ISSN 1087-1357

EISSN 1528-8935

Research Papers

Computational Stability Analysis of Chatter in Turning

S.-G. Chen, A. G. Ulsoy, Y. Koren

J. Manuf. Sci. Eng. November 1997, 119(4A): 457–460. doi: https://doi.org/10.1115/1.2831174

Abstract

View articletitled, Computational Stability Analysis of Chatter in Turning

Open the PDF for in another window

Topics: Chatter , Stability , Turning , Algebra , Machine tools , Cutting , Dynamics (Mechanics) , Machining , Vibration

A New Method to Detect Regenerative Chatter Using Spectral Analysis, Part 1: Basic Study on Criteria for Detection of Chatter

E. Kondo, H. Ota, T. Kawai

J. Manuf. Sci. Eng. November 1997, 119(4A): 461–466. doi: https://doi.org/10.1115/1.2831175

Abstract

View articletitled, A New Method to Detect Regenerative Chatter Using Spectral Analysis, Part 1: Basic Study on Criteria for Detection of Chatter

Open the PDF for in another window

Topics: Chatter , Emission spectroscopy , Spectroscopy , Computer simulation , Cutting , Stability , Vibration

An Enhanced Cutting Force Model for Face Milling With Variable Cutter Feed Motion and Complex Workpiece Geometry

F. Gu, S. G. Kapoor, R. E. DeVor, P. Bandyopadhyay

J. Manuf. Sci. Eng. November 1997, 119(4A): 467–475. doi: https://doi.org/10.1115/1.2831176

Abstract

View articletitled, An Enhanced Cutting Force Model for Face Milling With Variable Cutter Feed Motion and Complex Workpiece Geometry

Open the PDF for in another window

Topics: Cutting , Geometry , Milling , Errors , Machinery , Machining , Algorithms

A Model for the Prediction of Surface Flatness in Face Milling

F. Gu, S. N. Melkote, S. G. Kapoor, R. E. DeVor

J. Manuf. Sci. Eng. November 1997, 119(4A): 476–484. doi: https://doi.org/10.1115/1.2831177

Abstract

View articletitled, A Model for the Prediction of Surface Flatness in Face Milling

Open the PDF for in another window

Topics: Milling , Errors , Deflection , Machining , Cutting , Deformation , Manufacturing , Surface roughness

Perturbation Methods in Nonlinear Dynamics—Applications to Machining Dynamics

Ali H. Nayfeh, Char-Ming Chin, Jon Pratt

J. Manuf. Sci. Eng. November 1997, 119(4A): 485–493. doi: https://doi.org/10.1115/1.2831178

Abstract

View articletitled, Perturbation Methods in Nonlinear Dynamics—Applications to Machining Dynamics

Open the PDF for in another window

Topics: Dynamics (Mechanics) , Machining , Nonlinear dynamics , Bifurcation , Chatter , Limit cycles , Stability , Stiffness , Attractors , Computer simulation

Cutting Tool Temperatures in Contour Turning: Transient Analysis and Experimental Verification

D. A. Stephenson, T.-C. Jen, A. S. Lavine

J. Manuf. Sci. Eng. November 1997, 119(4A): 494–501. doi: https://doi.org/10.1115/1.2831179

Abstract

View articletitled, Cutting Tool Temperatures in Contour Turning: Transient Analysis and Experimental Verification

Open the PDF for in another window

Topics: Cutting tools , Temperature , Transient analysis , Turning , Boundary-value problems , Computation , Convection , Cutting , Model development , Production planning

Investigation on Cutting Temperature in Turning by a Tool-Work Thermocouple Technique

C. E. Leshock, Y. C. Shin

J. Manuf. Sci. Eng. November 1997, 119(4A): 502–508. doi: https://doi.org/10.1115/1.2831180

Abstract

View articletitled, Investigation on Cutting Temperature in Turning by a Tool-Work Thermocouple Technique

Open the PDF for in another window

Topics: Cutting , Temperature , Thermocouples , Turning , Alloy steel , Carbide cutting tools , Wear

Mechanisms of Material Removal in the Precision Production Grinding of Ceramics

K. Subramanian, S. Ramanath, M. Tricard

J. Manuf. Sci. Eng. November 1997, 119(4A): 509–519. doi: https://doi.org/10.1115/1.2831181

Abstract

View articletitled, Mechanisms of Material Removal in the Precision Production Grinding of Ceramics

Open the PDF for in another window

Topics: Ceramics , Grinding , Brittle fracture , Cycles , Deformation , Design , Finishes , Grinding wheels , Machine tools , Metals

Magnetic Float Polishing of Ceramics

M. Raghunandan, N. Umehara, A. Noori-Khajavi, R. Komanduri

J. Manuf. Sci. Eng. November 1997, 119(4A): 520–528. doi: https://doi.org/10.1115/1.2831182

Abstract

View articletitled, Magnetic Float Polishing of Ceramics

Open the PDF for in another window

Topics: Ceramics , Polishing , Design , Errors , Experimental methods , Finishes , Finishing , Finite element methods , Finite element model , Magnets

Improvement of Machinability of Sintered Composite-type Alloyed Steel Powder

Katsumi Yamaguchi, Takeshi Nakamoto, Masayuki Kitano, Masakuni Suzuki, Petros A. Abraha

J. Manuf. Sci. Eng. November 1997, 119(4A): 529–536. doi: https://doi.org/10.1115/1.2831183

Abstract

View articletitled, Improvement of Machinability of Sintered Composite-type Alloyed Steel Powder

Open the PDF for in another window

Topics: Composite materials , Machinability , Steel , Glass , Iron , Carbide cutting tools , Cutting , Cutting tools , Electrons , Lubricants

Injection Forging of Industrial Components From Thick-Walled Tubes

D. Colla, S. B. Petersen, R. Balendra, P. A. F. Martins

J. Manuf. Sci. Eng. November 1997, 119(4A): 537–541. doi: https://doi.org/10.1115/1.2831184

Abstract

View articletitled, Injection Forging of Industrial Components From Thick-Walled Tubes

Open the PDF for in another window

Topics: Forging , Deformation , Preforms , Aluminum , Collapse , Failure , Finite element analysis , Finite element model , Geometry , Metals

Simulation of the Hot Ring Rolling Process by Using a Thermo-Coupled Three-Dimensional Rigid-Viscoplastic Finite Element Method

S. G. Xu, K. J. Weinmann, D. Y. Yang, J. C. Lian

J. Manuf. Sci. Eng. November 1997, 119(4A): 542–549. doi: https://doi.org/10.1115/1.2831185

Abstract

View articletitled, Simulation of the Hot Ring Rolling Process by Using a Thermo-Coupled Three-Dimensional Rigid-Viscoplastic Finite Element Method

Open the PDF for in another window

Topics: Finite element methods , Simulation , Temperature , Deformation , Finite element analysis , Torque , Bearings , Computation , Design , Extruding

Die Life and Workpiece Properties Under Dry Condition in High-Speed Pressworking

Akira Iwabuchi, Ahmad bin Hj. Yunus, Mitsuaki Hayashi, Jun-ichiro Nishi, Yuji Sato

J. Manuf. Sci. Eng. November 1997, 119(4A): 550–555. doi: https://doi.org/10.1115/1.2831186

Abstract

View articletitled, Die Life and Workpiece Properties Under Dry Condition in High-Speed Pressworking

Open the PDF for in another window

Topics: Bronze , Phosphors , Steel , Tungsten

Extension of the Backward Tracing Scheme of the Rigid-Plastic FEM in Three-Dimensional Deformation

B. S. Kang, J. H. Lee, H. H. Choi

J. Manuf. Sci. Eng. November 1997, 119(4A): 556–562. doi: https://doi.org/10.1115/1.2831187

Abstract

View articletitled, Extension of the Backward Tracing Scheme of the Rigid-Plastic FEM in Three-Dimensional Deformation

Open the PDF for in another window

Topics: Deformation , Finite element methods , Design , Preforms , Boundary-value problems , Friction , Metalworking , Pressing

Refined Friction Modeling for Simple Upsetting

Tze-Chi Hsu, Chung-Hung Lee

J. Manuf. Sci. Eng. November 1997, 119(4A): 563–570. doi: https://doi.org/10.1115/1.2831188

Abstract

View articletitled, Refined Friction Modeling for Simple Upsetting

Open the PDF for in another window

Topics: Friction , Modeling , Lubricants , Lubrication , Flow (Dynamics) , Pressure , Boundary lubrication , Deformation , Film thickness , Finite element analysis

Scheduling Models for Setup Reduction

Chang-Xue (Jack) Feng, Andrew Kusiak, Chun-Che Huang

J. Manuf. Sci. Eng. November 1997, 119(4A): 571–579. doi: https://doi.org/10.1115/1.2831189

Abstract

View articletitled, Scheduling Models for Setup Reduction

Open the PDF for in another window

Topics: Cycles , Linear programming , Machining , Manufacturing , Tradeoffs

Performance of Synthetic and Mineral Soluble Oil When Turning AISI 8640 Steel

A. R. Machado, M. F. Motta, M. B. da Silva

J. Manuf. Sci. Eng. November 1997, 119(4A): 580–586. doi: https://doi.org/10.1115/1.2831190

Abstract

View articletitled, Performance of Synthetic and Mineral Soluble Oil When Turning AISI 8640 Steel

Open the PDF for in another window

Topics: Minerals , Steel , Turning , Cutting , Fluids , Surface roughness , Temperature , Wear , Carbide cutting tools , Lubrication

Feedback Interpolators for CNC Machine Tools

Chih-Ching Lo

J. Manuf. Sci. Eng. November 1997, 119(4A): 587–592. doi: https://doi.org/10.1115/1.2831191

Abstract

View articletitled, Feedback Interpolators for CNC Machine Tools

Open the PDF for in another window

Topics: Computer numerical control machine tools , Feedback , Interpolation , Algorithms

A Variational Method of Robust Fixture Configuration Design for 3-D Workpieces

Wayne Cai, S. Jack Hu, J. X. Yuan

J. Manuf. Sci. Eng. November 1997, 119(4A): 593–602. doi: https://doi.org/10.1115/1.2831192

Abstract

View articletitled, A Variational Method of Robust Fixture Configuration Design for 3-D Workpieces

Open the PDF for in another window

Topics: Design , Variational techniques , Errors , Computer software , Deformation , Fixturing , Geometry , Manufacturing , Nonlinear programming , Simulation

Robust Tolerance Design With the Integer Programming Approach

Chang-Xue (Jack) Feng, A. Kusiak

J. Manuf. Sci. Eng. November 1997, 119(4A): 603–610. doi: https://doi.org/10.1115/1.2831193

Abstract

View articletitled, Robust Tolerance Design With the Integer Programming Approach

Open the PDF for in another window

Topics: Design , Integer programming , Manufacturing , Taguchi methods

Generation of Periodic Trajectories for Optimal Robot Excitation

J. Swevers, C. Ganseman, J. De Schutter, H. Van Brussel

J. Manuf. Sci. Eng. November 1997, 119(4A): 611–615. doi: https://doi.org/10.1115/1.2831194

Abstract

View articletitled, Generation of Periodic Trajectories for Optimal Robot Excitation

Open the PDF for in another window

Topics: Excitation , Robots , Fourier series , Optimization

A Methodology to Improve Manufacturing Precision in the Presence of Workpiece Imperfections

Neville Lee, Ajay Joneja

J. Manuf. Sci. Eng. November 1997, 119(4A): 616–622. doi: https://doi.org/10.1115/1.2831195

Abstract

View articletitled, A Methodology to Improve Manufacturing Precision in the Presence of Workpiece Imperfections

Open the PDF for in another window

Topics: Manufacturing , Semiconductor wafers , Thin films

Prediction of Thermally Induced Time-Variant Machine Tool Error Maps Using a Fuzzy Artmap Neural Network

N. Srinivasa, J. C. Ziegert

J. Manuf. Sci. Eng. November 1997, 119(4A): 623–630. doi: https://doi.org/10.1115/1.2831196

Abstract

View articletitled, Prediction of Thermally Induced Time-Variant Machine Tool Error Maps Using a Fuzzy Artmap Neural Network

Open the PDF for in another window

Topics: Artificial neural networks , Errors , Machine tools , Machining , Cycles , Cutting tools , Approximation , Calibration , Downtime , Error compensation

Dynamic Estimation of Full Penetration Using Geometry of Adjacent Weld Pools

Y. M. Zhang, L. Li, R. Kovacevic

J. Manuf. Sci. Eng. November 1997, 119(4A): 631–643. doi: https://doi.org/10.1115/1.2831197

Abstract

View articletitled, Dynamic Estimation of Full Penetration Using Geometry of Adjacent Weld Pools

Open the PDF for in another window

Topics: Artificial neural networks , Geometry , Modeling , Welding

Technical Briefs

The Design of a Large Single-Screw Melt Extruder Using a Quasi Two-Dimensional Conducting Screw Computer Model

D. R. Samuel Jones, P. S. Ghoshdastidar, M. K. Muju, Manab K. Das

J. Manuf. Sci. Eng. November 1997, 119(4A): 644–648. doi: https://doi.org/10.1115/1.2831198

Abstract

View articletitled, The Design of a Large Single-Screw Melt Extruder Using a Quasi Two-Dimensional Conducting Screw Computer Model

Open the PDF for in another window

Topics: Computers , Design , Screws , Computer-aided design , Heat conduction , Heat transfer , Non-Newtonian flow , Steady state

Research Papers

Computational Stability Analysis of Chatter in Turning

A New Method to Detect Regenerative Chatter Using Spectral Analysis, Part 1: Basic Study on Criteria for Detection of Chatter

An Enhanced Cutting Force Model for Face Milling With Variable Cutter Feed Motion and Complex Workpiece Geometry

A Model for the Prediction of Surface Flatness in Face Milling

Perturbation Methods in Nonlinear Dynamics—Applications to Machining Dynamics

Cutting Tool Temperatures in Contour Turning: Transient Analysis and Experimental Verification

Investigation on Cutting Temperature in Turning by a Tool-Work Thermocouple Technique

Mechanisms of Material Removal in the Precision Production Grinding of Ceramics

Magnetic Float Polishing of Ceramics

Improvement of Machinability of Sintered Composite-type Alloyed Steel Powder

Injection Forging of Industrial Components From Thick-Walled Tubes

Simulation of the Hot Ring Rolling Process by Using a Thermo-Coupled Three-Dimensional Rigid-Viscoplastic Finite Element Method

Die Life and Workpiece Properties Under Dry Condition in High-Speed Pressworking

Extension of the Backward Tracing Scheme of the Rigid-Plastic FEM in Three-Dimensional Deformation

Refined Friction Modeling for Simple Upsetting

Scheduling Models for Setup Reduction

Performance of Synthetic and Mineral Soluble Oil When Turning AISI 8640 Steel

Feedback Interpolators for CNC Machine Tools

A Variational Method of Robust Fixture Configuration Design for 3-D Workpieces

Robust Tolerance Design With the Integer Programming Approach

Generation of Periodic Trajectories for Optimal Robot Excitation

A Methodology to Improve Manufacturing Precision in the Presence of Workpiece Imperfections

Prediction of Thermally Induced Time-Variant Machine Tool Error Maps Using a Fuzzy Artmap Neural Network

Dynamic Estimation of Full Penetration Using Geometry of Adjacent Weld Pools

Technical Briefs

The Design of a Large Single-Screw Melt Extruder Using a Quasi Two-Dimensional Conducting Screw Computer Model

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Technical Briefs

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only