In this paper, the mathematical model of the oscillation-assisted cylindrical plunge grinding process has been presented. In this model, the dynamical properties of the grinder, self-excited vibration (regenerative chatter), and nonlinear behavior of the grinding force have been taken into consideration. This mathematical model has been applied to analyze both formation and development of chatter on the workpiece and the grinding wheel surface during oscillation-assisted cylindrical plunge grinding. The frequency response function (FRF), describing dynamical properties of the grinder, has been determined by means of modal experiment. The model has been implemented in matlab-simulink environment in order to perform simulations. The results of the simulations confirmed the antiregenerative properties of the oscillations of the workpiece rotational movement during cylindrical plunge grinding.
Issue Section:
Research Papers
References
1.
Altintas
, Y.
, and Weck
, M.
, 2004
, “Chatter Stability of Metal Cutting and Grinding
,” CIRP Ann. Manuf. Technol.
, 53
(2
), pp. 619
–642
.10.1016/S0007-8506(07)60032-82.
Hahn
, R. S.
, 1963
, “Grinding Chatter—Causes and Cures
,” The Tool and Manufacturing Engineer
, ASTME, Detroit
, MI
., pp. 74
–78
.3.
Inasaki
, I.
, 1977
, “Regenerative Chatter in Grinding
,” Proceedings of the 18 MTDR Conference
, pp. 423
–429
.4.
Inasaki
, I.
, Karpuschewski
, B.
, and Lee
, H.-S.
, 2001
, “Grinding Chatter—Origin and Suppression
,” Ann. CIRP
, 50
(2
), pp. 1
–20
.10.1016/S0007-8506(07)62992-85.
Younis
, M. A.
, 1972
, “Theoretische und praktische Untersuchung des Ratterverhaltens beim Außenrundschleifen
,” Dissertation, RWTH, Aachen, Germany (in German).6.
Marchelek
, K.
, 1991
, Dynamics of Machine Tools
, WNT
, Warsaw
(in Polish).7.
Oczoś
, K.
, and Porzycki
, J.
, 1986
, Grinding—Fundamentals and Technique
, WNT
, Warsaw
(in Polish).8.
Tomków
, J.
, 1997
, Vibrostability of Machine Tools. Computer Aided Computation and Experiments
, WNT
, Warsaw
(in Polish).9.
Oryński
, F.
, and Pawłowski
, W.
, 1999
, “The Influence of Grinding Process on Forced Vibration Damping in Headstock of Grinding Wheel of Cylindrical Grinder
,” Int. J. Mach. Tools Manuf.
, 39
, pp. 229
–235
.10.1016/S0890-6955(98)00023-610.
Oryński
, F.
, and Pawłowski
, W.
, 2002
, “The Mathematical Description of Dynamics of the Cylindrical Grinder
,” Int. J. Mach. Tools Manuf.
, 42
(7
), pp. 773
–780
.10.1016/S0890-6955(02)00020-211.
Oryński
, F.
, and Pawłowski
, W.
, 2004
, “Simulation and Experimental Research of the Grinder's Wheelhead Dynamics
,” Int. J. Vib. Control
, 10
(6
), pp. 915
–930
.10.1177/107754630404136912.
Pawłowski
, W.
, 1999
, “The Effect of Grinding Parameters on Forced Vibration Damping of Wheelhead in Cylindrical Grinding
,” Ph.D. thesis, Lodz University of Technology, Lodz, Poland (in Polish).13.
Eksioglu
, C.
, Kilic
, Z. M.
, and Altintas
, Y.
, 2012
, “Discrete-Time Prediction of Chatter Stability, Cutting Forces, and Surface Location Errors in Flexible Milling Systems
,” ASME J. Manuf. Sci. Eng.
, 134
(6
), p. 061006
.10.1115/1.400762214.
Hahn
, R. S.
, 1964
, “Gyroscopically Induced Vibrations in Grinding Spindles
,” Ann. CIRP
, 13
(4
), pp. 381
–388
.15.
Mannan
, M. A.
, Drew
, S. J.
, and Stone
, B. J.
, 2000
, “Torsional Vibration Effects in Grinding?
,” Ann. CIRP
, 49
(1
), pp. 249
–252
.10.1016/S0007-8506(07)62939-416.
Movahhedy
, M. R.
, and Mosaddegh
, P.
, 2006
, “Prediction of Chatter in High Speed Milling Including Gyroscopic Effects
,” Int. J. Mach. Tools Manuf.
, 46
(9
), pp. 996
–1001
.10.1016/j.ijmachtools.2005.07.04317.
Pawłowski
, W.
, 2003
, “Application of CAD Program for Mechanical Systems Modeling and Analysis
,” TiAM
, 2
, pp. 12
–15
(in Polish).18.
Pawłowski
, W.
, 2009
, “Dynamical Properties Examination of Digital Prototype of Cylindrical Grinder's Headstock
,” Mechanik
, 5–6
, pp. 431
–435
(in Polish).19.
Pawłowski
, W.
, and Oryński
, F.
, 2008
, “Methods of Grinders Dynamics Modeling With Chatter
,” Mechanik
, 11
, pp. 918
–921
(in Polish).20.
Pawłowski
, W.
, 2010
, “Vibratory Cylindrical Plunge Grinding
,” D.Sc. thesis, Zeszyty Naukowe Politechniki Łódzkiej, Nr 654, Rozprawy Naukowe, z. 174, Lodz, Poland (in Polish).21.
Maslov
, E. N.
, 1974
, Theory of Material Grinding
, Masinostroenie
, Moscow
(in Russian).22.
Inasaki
, I.
, Tonou
, K.
, and Yonetsu
, S.
, 1977
, “Regenerative Chatter in Cylindrical Plunge Grinding
,” Bull. JSME
, 20
(150
), pp. 1648
–1654
.10.1299/jsme1958.20.164823.
Mrozek
, B.
, and Mrozek
, Z.
, 2004
, Matlab and Simulink
, Helion
, Gliwice, Poland
(in Polish).24.
Wołk
, R.
, 1972
, Worktime Standardizing for Machining With Machine Tools
, WNT
, Warsaw
(in Polish).Copyright © 2013 by ASME
You do not currently have access to this content.
