The conventional point-kinematic model of fixtures has only treated point geometry of the contacts between locators and workpiece. However, this model, which ignores the underlying surface properties of the locators-plus-workpiece system, is inherently incapable of capturing the effects of the geometric properties important to accurate positioning of the workpiece. In this paper, we present a fixture kinematic analysis based on the full kinematics of locator-workpiece contact. This model incorporates a “virtual” kinematic chain with meshing parameters of contact kinematics in a velocity formulation. Conditions of a deterministic fixture are derived. It is shown that the workpiece position and orientation are completely characterized by the kinematic properties of the locator contacts with the workpiece, including not only the arbitrary locator location errors but also the surface properties at nonprismatic locator-workpiece contacts. This is illustrated with numerical examples. The fixture kinematic analysis developed here has a strong implication for designing fixtures with high locating precision requirements.

Issue Section:
Technical Papers
Keywords:
kinematics, position control, mechanical contact, assembling
Topics:
Errors, Kinematics
1.
Lakshminarayana, K., 1978, “Mechanics of Form Closure,” 78-det-32, ASME Paper.
2.
Ohwovoriole
,
E. N.
,
1987
, “
Kinematics and Friction in Grasping by Robotic Hands
,”
ASME J. Mech. Transm. Autom. Des.
,
109
, pp.
398
–
404
, September.
3.
Nguyen
,
V.-D.
,
1988
, “
Constructing Force-Closure Grasps
,”
Int. J. Robot. Res.
,
7
(
3
), pp.
3
–
16
, June.
4.
Mishra, B., 1994, “Grasp Metrics: Optimality and Complexity,” Algorithmic Foundations of Robotics, K. Goldberg et al., eds., pp. 137–165. A. K. Peters, Wellesley, MA.
5.
Markenscoff
,
X.
,
Ni
,
L.
, and
Papadimitriou
,
C. H.
,
1990
, “
The Geometry of Grasping
,”
Int. J. Robot. Res.
,
9
(
1
), pp.
61
–
74
.
6.
Asada
,
H.
, and
By
,
A. B.
, 1985, “Kinematics Analysis of Workpart Fixturing for Flexible Assembly with Automatically Reconfigurable Fixtures,” International Journal of Robotics and Automation, RA-1(2), pp. 86–93, June.
7.
Chou
,
Y-C.
,
Chandru
,
V.
, and
Barash
,
M. M.
,
1989
, “
A Mathematical Approach to Automated Configuration of Machining Fixtures: Analysis and Synthesis
,”
ASME J. Eng. Ind.
,
111
, pp.
299
–
306
.
8.
Wang
,
M. Y.
,
2000
, “
An Optimal Design for 3-d Fixture Synthesis in a Point Set Domain
,”
IEEE Trans. Rob. Autom.
,
16
(
6
), pp.
839
–
846
.
9.
DeMeter
,
E. C.
,
1994
, “
Restraint Analysis of Fixtures Which Rely on Surface Contact
,”
ASME J. Eng. Ind.
,
116
(
2
), pp.
207
–
215
.
10.
Brost
,
R. C.
, and
Goldberg
,
K. Y.
,
1996
, “
A Complete Algorithm for Designing Plannar Fixtures Using Modular Components
,”
IEEE Trans. Rob. Autom.
,
12
(
1
), pp.
31
–
46
.
11.
Zhuang
,
Y.
,
Goldberg
,
K.
, and
Wong
,
Y.-C.
,
1996
, “
On the Existence of Solutions in Modular Fixturing
,”
Int. J. Robot. Res.
,
15
(
5
), pp.
5
–
9
.
12.
Cai
,
W.
,
Hu
,
S. J.
, and
Yuan
,
J.
,
1996
, “
Deformable Sheet Metal Fixturing: Principles, Algorithms, and Simulation
,”
ASME J. Manuf. Sci. Eng.
,
118
, pp.
318
–
324
, August.
13.
Campbell, Paul D., 1994, Basic Fixture Design, Industrial Press, New York.
14.
Nee, A. Y. C., Whybrew, K., and Senthil Kumar, A., 1995, Advanced Fixture Design for FMS, Springer-Verlag, New York.
15.
Ceglarek
,
D.
, and
Shi
,
J.
,
1996
, “
Fixture Failure Diagonosis for Autobody Assembly Using Pattern Recognition
,”
ASME J. Eng. Ind.
,
118
, pp.
55
–
66
.
16.
Carlson, J. S., 1999, “Root Cause Analysis for Fixtures and Locating Schemes Using Variation Data,” Proceedings of 6th CIRP International Seminar on Computer-Aided Tolerancing, pp. 111–120.
17.
Carlson
,
J. S.
,
2001
, “
Quadratic Sensitivity Analysis of Fixturing and Locating Schemes for Rigid Parts
,”
ASME J. Manuf. Sci. Eng.
,
123
(
3
), pp.
462
–
472
.
18.
Li
,
B.
, and
Melkote
,
S. N.
,
1999
, “
An Elastic Contact Model for the Prediction of Workpiece-Fixture Contact Forces in Clamping
,”
ASME J. Manuf. Sci. Eng.
,
121
, pp.
485
–
493
.
19.
Montana
,
D. J.
,
1988
, “
The Kinematics of Contact and Grasp
,”
Int. J. Robot. Res.
,
7
(
3
), pp.
17
–
32
, June.
20.
Cai
,
C. S.
, and
Roth
,
B.
,
1986
, “
On the Planar Motion of Rigid Bodies with Point Contact
,”
Mech. Mach. Theory
,
21
(
6
), pp.
453
–
466
.
21.
Montana
,
D. J.
,
1995
, “
The Kinematics of Multi-Fingered Manipulation
,”
IEEE Trans. Rob. Autom.
,
11
(
4
), pp.
491
–
503
, August.
22.
Murray, R. M., Li, Z., and Sastry, S. S., 1994, A Mathematical Introduction to Robotic Manipulation, CRC Press, Boca Raton, FL.
23.
Wang
,
M. Y.
, 2002, “Tolerance Analysis for Fixture Layout Design,” Assembly Automation, A Special Issue on Automated Fixturing, 2(2), pp. 153–162.
24.
Wang, M. Y., 2002, “Characterizations of Positioning Accuracy of Deterministic Localization of Fixtures,” Proceedings of IEEE International Conference on Robotics and Automation, Washington, DC, May.
25.
Anitescu
,
M.
,
Cremer
,
J. F.
, and
Potra
,
F. A.
,
1996
, “
Formulating Three-Dimensional Contact Dynamics Problems
,”
Mech. Struct. Mach.
24
(
4
), pp.
405
–
437
.
26.
Wang, M. Y., 2001, “A Full-Kinematic Model of Fixtures for Precision Locating Applications,” Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Maui, Hawaii, October, Vol. 2, pp. 1135–1140.
Copyright © 2003
 by ASME
You do not currently have access to this content.