To simulate the heat transfer performance of devices incorporating high-conductivity porous materials, it is necessary to determine the relevant effective properties to close the volume-averaged momentum and energy equations. In this work, we determine these effective properties by conducting direct simulations in an idealized spherical void phase geometry and use the results to establish closure relations to be employed in a volume-averaged framework. To close the volume-averaged momentum equation, we determine the permeability as defined by Darcy’s law as well as a non-Darcy term, which characterizes the departure from Darcy’s law at higher Reynolds numbers. Results indicate that the non-Darcy term is nonlinearly related to Reynolds number, not only confirming previous evidence regarding such behavior in the weak inertia flow regime, but demonstrating that this is generally true at higher Reynolds numbers as well. The volume-averaged energy equation in the fluid phase is closed by the thermal dispersion conductivity tensor, the convecting velocity, and the interfacial Nusselt number. Overall, it has been found that many existing correlations for the effective thermal properties of graphite foams are oversimplified. In particular, it has been found that the dispersion conductivity is not well characterized using the Péclet number alone, rather the Reynolds and Prandtl numbers must be considered as separate influences. Additionally, the convecting velocity modification, which is not typically considered, was found to be significant, while the interfacial Nusselt number was found to exhibit a nonzero asymptote at low Péclet numbers. Finally, simulations using the closed volume-averaged equations reveal significant differences in heat transfer when employing the present dispersion model in comparison to a simpler dispersion model commonly used for metallic foams, particularly at high Péclet numbers and for thicker foam blocks.
Skip Nav Destination
e-mail: astraatman@eng.uwo.ca
Article navigation
Research Papers
Numerical Results for the Effective Flow and Thermal Properties of Idealized Graphite Foam
Anthony G. Straatman
Anthony G. Straatman
Mem. ASME
Department of Mechanical and Materials Engineering,
e-mail: astraatman@eng.uwo.ca
The University of Western Ontario
,London, ON, N6A 5B9, Canada
Search for other works by this author on:
Anthony G. Straatman
Mem. ASME
Department of Mechanical and Materials Engineering,
The University of Western Ontario
,London, ON, N6A 5B9, Canada
e-mail: astraatman@eng.uwo.ca
J. Heat Transfer. Apr 2012, 134(4): 042603 (12 pages)
Published Online: February 13, 2012
Article history
Received:
June 17, 2011
Revised:
September 26, 2011
Accepted:
September 27, 2011
Online:
February 13, 2012
Published:
February 13, 2012
Citation
DeGroot, C. T., and Straatman, A. G. (February 13, 2012). "Numerical Results for the Effective Flow and Thermal Properties of Idealized Graphite Foam." ASME. J. Heat Transfer. April 2012; 134(4): 042603. https://doi.org/10.1115/1.4005207
Download citation file:
Get Email Alerts
Cited By
Entropic Analysis of the Maximum Output Power of Thermoradiative Cells
J. Heat Mass Transfer
Molecular Dynamics Simulations in Nanoscale Heat Transfer: A Mini Review
J. Heat Mass Transfer
Related Articles
A Unit Cube-Based Model for Heat Transfer and Fluid Flow in Porous
Carbon Foam
J. Heat Transfer (April,2006)
Forced Convection Heat Transfer and Hydraulic Losses in Graphitic Foam
J. Heat Transfer (September,2007)
Direct Simulation of Thermal Transport Through Sintered Wick Microstructures
J. Heat Transfer (January,2012)
Tomography-Based Heat and Mass Transfer Characterization of Reticulate Porous Ceramics for High-Temperature Processing
J. Heat Transfer (February,2010)
Related Proceedings Papers
Related Chapters
PVDF/CO 3 O 4 Nanocomposites: Porosity, Crystallinity and Conductivity
International Conference on Advanced Computer Theory and Engineering, 4th (ICACTE 2011)
Measurement of Gas Permeability of Irradiated and Virgin Graphite Specimens
Graphite Testing for Nuclear Applications: The Validity and Extension of Test Methods for Material Exposed to Operating Reactor Environments
Completing the Picture
Air Engines: The History, Science, and Reality of the Perfect Engine