Due to the high intrinsic thermal conductivity of carbon allotropes, there have been many attempts to incorporate such structures into existing thermal abatement technologies. In particular, carbon nanotubes (CNTs) and graphitic materials (i.e., graphite and graphene flakes or stacks) have garnered much interest due to the combination of both their thermal and mechanical properties. However, the introduction of these carbon-based nanostructures into thermal abatement technologies greatly increases the number of interfaces per unit length within the resulting composite systems. Consequently, thermal transport in these systems is governed as much by the interfaces between the constituent materials as it is by the materials themselves. This paper reports the behavior of phononic thermal transport across interfaces between isotropic thin films and graphite substrates. Elastic and inelastic diffusive transport models are formulated to aid in the prediction of conductance at a metal-graphite interface. The temperature dependence of the thermal conductance at Au-graphite interfaces is measured via transient thermoreflectance from 78 to 400 K. It is found that different substrate surface preparations prior to thin film deposition have a significant effect on the conductance of the interface between film and substrate.
Skip Nav Destination
e-mail: duda@virginia.edu
e-mail: pehopki@sandia.gov
Article navigation
Heat Transfer In Nanochannels, Microchannels, And Minichannels
Prediction and Measurement of Thermal Transport Across Interfaces Between Isotropic Solids and Graphitic Materials
John C. Duda,
John C. Duda
Department of Mechanics and Aerospace Engineering, University of Virginia, Charlottesville, VA 22904
e-mail: duda@virginia.edu
Search for other works by this author on:
Patrick E. Hopkins
Patrick E. Hopkins
Engineering Sciences Center, Sandia National Laboratories, Albuquerque, NM 87185
e-mail: pehopki@sandia.gov
Search for other works by this author on:
John C. Duda
Department of Mechanics and Aerospace Engineering, University of Virginia, Charlottesville, VA 22904
e-mail: duda@virginia.edu
Patrick E. Hopkins
Engineering Sciences Center, Sandia National Laboratories, Albuquerque, NM 87185
e-mail: pehopki@sandia.gov
J. Heat Transfer. Feb 2012, 134(2): 020910 (7 pages)
Published Online: December 22, 2011
Article history
Received:
November 1, 2010
Revised:
May 11, 2011
Online:
December 22, 2011
Published:
December 22, 2011
Citation
Norris, P. M., Smoyer, J. L., Duda, J. C., and Hopkins, P. E. (December 22, 2011). "Prediction and Measurement of Thermal Transport Across Interfaces Between Isotropic Solids and Graphitic Materials." ASME. J. Heat Transfer. February 2012; 134(2): 020910. https://doi.org/10.1115/1.4004932
Download citation file:
Get Email Alerts
Cited By
Related Articles
Thermometry and Thermal Transport in Micro/Nanoscale Solid-State Devices and Structures
J. Heat Transfer (April,2002)
Measurement of Thermal Boundary Conductance of a Series of Metal-Dielectric Interfaces by the Transient Thermoreflectance Technique
J. Heat Transfer (March,2005)
Criteria for Cross-Plane Dominated Thermal Transport in Multilayer Thin Film Systems During Modulated Laser Heating
J. Heat Transfer (August,2010)
Phonon Heat Conduction in Thin Films: Impacts of Thermal Boundary Resistance and Internal Heat Generation
J. Heat Transfer (April,2001)
Related Proceedings Papers
Related Chapters
Layer Arrangement Impact on the Electromechanical Performance of a Five-Layer Multifunctional Smart Sandwich Plate
Advanced Multifunctional Lightweight Aerostructures: Design, Development, and Implementation
Decoupling of Surface Graphene Layer on Graphite
International Conference on Computer and Electrical Engineering 4th (ICCEE 2011)
Orthotropic Media
Thermal Spreading and Contact Resistance: Fundamentals and Applications