The process of freeze coating of a binary substance on a chilled moving plate is studied theoretically with special emphasis on the behavior of the two-phase mushy zone. The flow and heat transfer in five separate regions of the system, i.e., the moving plate, the freeze coat, the two-phase packing region, the two-phase dispersed region and the molten substance region, are formulated mathematically to describe the freeze-coating process. A supplemental equation derived from a simplified phase diagram and an appropriate viscosity model are employed to complete the mathematical description of the two-phase mushy zone. The system of equations is solved by a combined analytical-numerical technique to determine the spatial variations of the solidus and liquidus fronts. Effects of seven controlling parameters, including the freeze coat-to-wall thermal ratio, the wall subcooling parameter, the molten substance superheating parameter, the Prandtl number, the Stefan number, the equilibrium partition ratio, and the packing limit fraction, on the behavior of the two-phase mushy zone and the freeze-coating process are determined.
Behavior of the Two-Phase Mushy Zone During Freeze Coating on a Continuous Moving Plate
Contributed by the Heat Transfer Division for publication in the JOURNAL OF HEAT TRANSFER. Manuscript received by the Heat Transfer Division December 4, 2000; revision received August 17, 2001. Associate Editor: V. P. Carey.
- Views Icon Views
- Share Icon Share
- Search Site
Tangthieng, C., Cheung, F. B., and Shiah, S. W. (August 17, 2001). "Behavior of the Two-Phase Mushy Zone During Freeze Coating on a Continuous Moving Plate ." ASME. J. Heat Transfer. February 2002; 124(1): 111–119. https://doi.org/10.1115/1.1420714
Download citation file: