Junction thermal conductance is an important consideration in such applications as thermally induced stresses in supersonic and hypersonic flight vehicles, nuclear reactor cooling, electronics packaging, spacecraft thermal control, gas turbine and internal combustion engine cooling, and cryogenic liquid storage. A fundamental problem in analyzing and predicting junction thermal conductance is determining thermal contact conductance of nonflat rough metals. Workable models have been previously derived for the limiting idealized cases of flat, rough, and spherical smooth surfaces. However, until now no tractable models have been advanced for nonflat rough “engineering” surfaces which are much more commonly dealt with in practice. The present investigation details the synthesis of previously derived models for macroscopically nonuniform thermal contact conductance and contact of nonflat rough spheres into a thermomechanical model, which is presented in an analytical/graphical format. The present model agrees well with representative experimental conductance results from the literature for stainless steel 303 and 304 with widely varying nonflatness (2 to 200 μm) and roughness (0.1 to 10 μm).
Skip Nav Destination
e-mail: lambertm@isc.sjsu.edu
Article navigation
Research Papers
Thermal Contact Conductance of Spherical Rough Metals
M. A. Lambert,
M. A. Lambert
Department of Mechanical Engineering, San Jose State University, One Washington Square, San Jose, CA 95192-0087
e-mail: lambertm@isc.sjsu.edu
Search for other works by this author on:
L. S. Fletcher
L. S. Fletcher
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843-3123
Search for other works by this author on:
M. A. Lambert
Department of Mechanical Engineering, San Jose State University, One Washington Square, San Jose, CA 95192-0087
e-mail: lambertm@isc.sjsu.edu
L. S. Fletcher
Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843-3123
J. Heat Transfer. Nov 1997, 119(4): 684-690 (7 pages)
Published Online: November 1, 1997
Article history
Received:
February 8, 1996
Revised:
April 16, 1997
Online:
December 5, 2007
Citation
Lambert, M. A., and Fletcher, L. S. (November 1, 1997). "Thermal Contact Conductance of Spherical Rough Metals." ASME. J. Heat Transfer. November 1997; 119(4): 684–690. https://doi.org/10.1115/1.2824172
Download citation file:
Get Email Alerts
Cited By
Estimation of thermal emission from mixture of CO2 and H2O gases and fly-ash particles
J. Heat Mass Transfer
Non-Classical Heat Transfer and Recent Progress
J. Heat Mass Transfer
Related Articles
Thermal Interfacing Techniques for Electronic Equipment—A Perspective
J. Electron. Packag (June,2003)
Effect of Surface Deformations on Contact Conductance
J. Heat Transfer (November,1992)
Thermal Gap Conductance of Conforming Surfaces in Contact
J. Heat Transfer (August,1993)
The Thermal Contact Conductance of Hard and Soft Coat Anodized Aluminum
J. Heat Transfer (May,1995)
Related Proceedings Papers
Related Chapters
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment
How to Use this Book
Thermal Spreading and Contact Resistance: Fundamentals and Applications
Thermal Interface Resistance
Thermal Management of Microelectronic Equipment, Second Edition