Experiments were conducted to determine the turbulent heat transfer and flow characteristics of an oblique impinging circular jet within closely confined walls using air as a working fluid. The local temperature distribution on the impingement surface was obtained in detail by a thermocamera using a liquid crystal sheet. A correction to the heat flux was evaluated by using the detailed temperature distribution and solving numerically the three-dimensional equation of heat conduction in the heated section. Two-dimensional profiles of the local Nusselt numbers and temperatures changed with jet angle and Reynolds number. These showed a peak shift toward the minor flow region and a plateau of the local heat transfer coefficients in the major flow region. The local velocity and turbulent intensity in the gap between the confined insulated wall and impingement surface were also obtained in detail by a thermal anemometer.
Skip Nav Destination
Article navigation
Research Papers
Heat Transfer and Flow Characteristics of an Oblique Turbulent Impinging Jet Within Confined Walls
K. Ichimiya
K. Ichimiya
Department of Mechanical System Engineering, Yamanashi University, Takeda-4, Kofu, Yamanashi, 400 Japan
Search for other works by this author on:
K. Ichimiya
Department of Mechanical System Engineering, Yamanashi University, Takeda-4, Kofu, Yamanashi, 400 Japan
J. Heat Transfer. May 1995, 117(2): 316-322 (7 pages)
Published Online: May 1, 1995
Article history
Received:
October 1, 1993
Revised:
April 1, 1994
Online:
December 5, 2007
Citation
Ichimiya, K. (May 1, 1995). "Heat Transfer and Flow Characteristics of an Oblique Turbulent Impinging Jet Within Confined Walls." ASME. J. Heat Transfer. May 1995; 117(2): 316–322. https://doi.org/10.1115/1.2822523
Download citation file:
Get Email Alerts
Cited By
On Prof. Roop Mahajan's 80th Birthday
J. Heat Mass Transfer
Thermal Hydraulic Performance and Characteristics of a Microchannel Heat Exchanger: Experimental and Numerical Investigations
J. Heat Mass Transfer (February 2025)
Related Articles
Elements of a General Correlation for Turbulent Heat Transfer
J. Heat Transfer (May,1996)
Numerical Investigation of Near-Wall Turbulent Heat Transfer Taking Into Account the Unsteady Heat Conduction in the Solid Wall
J. Heat Transfer (May,1989)
Local Friction and Heat Transfer Behavior of Water in a Turbulent Pipe Flow With a Large Heat Flux at the Wall
J. Heat Transfer (May,1995)
Heat Transfer Through a Pressure-Driven Three-Dimensional Boundary Layer
J. Heat Transfer (May,1991)
Related Proceedings Papers
Related Chapters
Hydraulic Resistance
Heat Transfer & Hydraulic Resistance at Supercritical Pressures in Power Engineering Applications
Heat Transfer Enhancement by Using Nanofluids in Laminar Forced Convection Flows Considering Variable Properties
Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2010)
Blowin' in the Wind
Hot Air Rises and Heat Sinks: Everything You Know about Cooling Electronics Is Wrong