Topics: Cavities , Combustion chambers , Engineering simulation , Exhaust systems , Fuels , Reynolds-averaged Navier–Stokes equations , Simulation , Syngas , Emissions , Temperature

Measurements of Stretch Statistics at Flame Leading Points for High Hydrogen Content Fuels

Andrew Marshall, Julia Lundrigan, Prabhakar Venkateswaran, Jerry Seitzman, Tim Lieuwen

J. Eng. Gas Turbines Power. November 2017, 139(11): 111503. doi: https://doi.org/10.1115/1.4035819

Abstract

View articletitled, Measurements of Stretch Statistics at Flame Leading Points for High Hydrogen Content Fuels

Open the PDF for in another window

Topics: Flames , Fuels , Statistics , Turbulence , Flow (Dynamics)

Impact of a Yttria-Stabilized Zirconia Thermal Barrier Coating on HCCI Engine Combustion, Emissions, and Efficiency

Tommy Powell, Ryan O'Donnell, Mark Hoffman, Zoran Filipi

J. Eng. Gas Turbines Power. November 2017, 139(11): 111504. doi: https://doi.org/10.1115/1.4036577

Abstract

View articletitled, Impact of a Yttria-Stabilized Zirconia Thermal Barrier Coating on HCCI Engine Combustion, Emissions, and Efficiency

Open the PDF for in another window

Topics: Coatings , Combustion , Emissions , Engines , Homogeneous charge compression ignition engines , Temperature , Coating processes , Cylinders , Pistons , Fuels

Gas Turbines: Cycle Innovations

Power Plant Output Augmentation by Evaporative Cooling Based on HRSG Blowdown Water Recycling in the Kingdom of Saudi Arabia: A Novel Approach

Jose Carmona

J. Eng. Gas Turbines Power. November 2017, 139(11): 111701. doi: https://doi.org/10.1115/1.4036685

Abstract

View articletitled, Power Plant Output Augmentation by Evaporative Cooling Based on HRSG Blowdown Water Recycling in the Kingdom of Saudi Arabia: A Novel Approach

Open the PDF for in another window

Topics: Evaporative cooling , Heat recovery steam generators , Power stations , Water , Design , Water reuse

Gas Turbines: Structures and Dynamics

Effect of Recess Shape on the Performance of a High-Speed Hybrid Journal Bearing

Alexandrina Untaroiu, Gen Fu

J. Eng. Gas Turbines Power. November 2017, 139(11): 112501. doi: https://doi.org/10.1115/1.4036946

Abstract

View articletitled, Effect of Recess Shape on the Performance of a High-Speed Hybrid Journal Bearing

Open the PDF for in another window

Topics: Bearings , Computational fluid dynamics , Design , Friction , Geometry , Journal bearings , Lift (Fluid dynamics) , Optimization , Pressure , Regression models

Numerical Investigation of Creep–Fatigue Behavior in a Steam Turbine Inlet Valve Under Cyclic Thermomechanical Loading

Weizhe Wang, Sihua Xu, Yingzheng Liu

J. Eng. Gas Turbines Power. November 2017, 139(11): 112502. doi: https://doi.org/10.1115/1.4036953

Abstract

View articletitled, Numerical Investigation of Creep–Fatigue Behavior in a Steam Turbine Inlet Valve Under Cyclic Thermomechanical Loading

Open the PDF for in another window

Topics: Creep , Fatigue , Steam , Stress , Temperature , Thermomechanics , Valves , Diffusers , Damage

Gas Turbines: Turbomachinery

A Comparison of Single and Double Lip Rim Seal Geometries

Svilen S. Savov, Nicholas R. Atkins, Sumiu Uchida

J. Eng. Gas Turbines Power. November 2017, 139(11): 112601. doi: https://doi.org/10.1115/1.4037027

Abstract

View articletitled, A Comparison of Single and Double Lip Rim Seal Geometries

Open the PDF for in another window

Topics: Blades , Cavities , Flow (Dynamics) , Pressure , Rotors , Stators , Engines

Flowfield and Performance Analysis of a Three-Dimensional TBCC Exhaust Nozzle

Baocheng Xu, Jinglei Xu, Xiao Wang, Wei Zhu, Yanfeng Niu

J. Eng. Gas Turbines Power. November 2017, 139(11): 112602. doi: https://doi.org/10.1115/1.4037193

Abstract

View articletitled, Flowfield and Performance Analysis of a Three-Dimensional TBCC Exhaust Nozzle

Open the PDF for in another window

Topics: Computational fluid dynamics , Design , Exhaust systems , Flight , Flow (Dynamics) , Nozzles , Pressure , Ramjets , Thrust , Turbojets

Enhancement to the Traditional Ellipse Law for More Accurate Modeling of a Turbine With a Finite Number of Stages

W. F. Fuls

J. Eng. Gas Turbines Power. November 2017, 139(11): 112603. doi: https://doi.org/10.1115/1.4037097

Abstract

View articletitled, Enhancement to the Traditional Ellipse Law for More Accurate Modeling of a Turbine With a Finite Number of Stages

Open the PDF for in another window

Topics: Nozzles , Pressure , Turbines , Flow (Dynamics)

Internal Combustion Engines

Application of Improved Artificial Bee Colony Algorithm to the Parameter Optimization of a Diesel Engine With Pilot Fuel Injections

Qiang Zhang, Ryan M. Ogren, Song-Charng Kong

J. Eng. Gas Turbines Power. November 2017, 139(11): 112801. doi: https://doi.org/10.1115/1.4036766

Abstract

View articletitled, Application of Improved Artificial Bee Colony Algorithm to the Parameter Optimization of a Diesel Engine With Pilot Fuel Injections

Open the PDF for in another window

Topics: Algorithms , Diesel engines , Emissions , Engines , Exhaust gas recirculation , Food products , Fuels , Nitrogen oxides , Optimization , Combustion

Quasi-Dimensional Diesel Engine Combustion Modeling With Improved Diesel Spray Tip Penetration, Ignition Delay, and Heat Release Submodels

Shuonan Xu, Hirotaka Yamakawa, Keiya Nishida, Zoran Filipi

J. Eng. Gas Turbines Power. November 2017, 139(11): 112802. doi: https://doi.org/10.1115/1.4036575

Abstract

View articletitled, Quasi-Dimensional Diesel Engine Combustion Modeling With Improved Diesel Spray Tip Penetration, Ignition Delay, and Heat Release Submodels

Open the PDF for in another window

Topics: Combustion , Cylinders , Diesel , Diesel engines , Engines , Exhaust gas recirculation , Fuels , Heat , Ignition delay , Modeling

Model Predictive Engine Speed Control for Transmissions With Dog Clutches

Qilun Zhu, Robert Prucka, Michael Prucka, Hussein Dourra

J. Eng. Gas Turbines Power. November 2017, 139(11): 112803. doi: https://doi.org/10.1115/1.4036622

Abstract

View articletitled, Model Predictive Engine Speed Control for Transmissions With Dog Clutches

Open the PDF for in another window

Topics: Engines , Combustion , Control equipment

A Combined Organic Rankine Cycle With Double Modes Used for Internal Combustion Engine Waste Heat Recovery

Guohui Zhu, Jingping Liu, Jianqin Fu, Shuqian Wang

J. Eng. Gas Turbines Power. November 2017, 139(11): 112804. doi: https://doi.org/10.1115/1.4036955

Abstract

View articletitled, A Combined Organic Rankine Cycle With Double Modes Used for Internal Combustion Engine Waste Heat Recovery

Open the PDF for in another window

Topics: Cycles , Internal combustion engines , Organic Rankine cycle , Fluids , Low temperature , High temperature

Detached Eddy Simulation Simulation of Asymmetrical Flow in a High Pressure Diesel Injector

Russell Prater, Yongsheng Lian

J. Eng. Gas Turbines Power. November 2017, 139(11): 112805. doi: https://doi.org/10.1115/1.4037128

Abstract

View articletitled, Detached Eddy Simulation Simulation of Asymmetrical Flow in a High Pressure Diesel Injector

Open the PDF for in another window

Topics: Diesel , Eddies (Fluid dynamics) , Ejectors , Flow (Dynamics) , Needles , Simulation , Sprays , Vapors , High pressure (Physics) , Pressure

Development and Performance Measurements of a Beta-Type Free-Piston Stirling Engine Along With Dynamic Model Predictions

Kyuho Sim, Dong-Jun Kim

J. Eng. Gas Turbines Power. November 2017, 139(11): 112806. doi: https://doi.org/10.1115/1.4036967

Abstract

View articletitled, Development and Performance Measurements of a Beta-Type Free-Piston Stirling Engine Along With Dynamic Model Predictions

Open the PDF for in another window

Topics: Damping , Engines , Pistons , Stirling engines , Stress , Temperature , Pressure , Dynamic models

Technical Brief

A Detailed Modular Governor-Turbine Model for Multiple-Spool Gas Turbine With Scrutiny of Bleeding Effect

Hossein Balaghi Enalou, Eshagh Abbasi Soreshjani, Mohamed Rashed, Seang Shen Yeoh, Serhiy Bozhko

J. Eng. Gas Turbines Power. November 2017, 139(11): 114501. doi: https://doi.org/10.1115/1.4036947

Abstract

View articletitled, A Detailed Modular Governor-Turbine Model for Multiple-Spool Gas Turbine With Scrutiny of Bleeding Effect

Open the PDF for in another window

Topics: Flow (Dynamics) , Gas turbines , Governors , Stress , Turbines , Engines , Valves , Temperature , Modeling , Simulation

All Issues

Email alerts

Accepted Manuscript Alert

New Issue Alert

RSS Feeds

Open Issues RSS Feed

Latest
Most Read
Most Cited

Shape Optimization of an Industrial Aeroengine Combustor to reduce Thermoacoustic Instability

J. Eng. Gas Turbines Power

Dynamic Response of A Pivot-Mounted Squeeze Film Damper: Measurements and Predictions

J. Eng. Gas Turbines Power

Review of The Impact Of Hydrogen-Containing Fuels On Gas Turbine Hot-Section Materials

J. Eng. Gas Turbines Power

Effects of Lattice Orientation Angle On Tpms-Based Transpiration Cooling

J. Eng. Gas Turbines Power

An investigation of a multi-injector, premix/micromix burner burning pure methane to pure hydrogen

J. Eng. Gas Turbines Power

Research Papers

Gas Turbines: Aircraft Engine

Jet Engine Gas Path Analysis Based on Takeoff Performance Snapshots

Full-Scale Turbofan Demonstration of a Deployable Engine Air-Brake for Drag Management Applications

Gas Turbines: Combustion, Fuels, and Emissions

Performance of a Laser Ignited Multicylinder Lean Burn Natural Gas Engine

Numerical and Experimental Studies on a Syngas-Fired Ultra Low NO_x Combustor

Measurements of Stretch Statistics at Flame Leading Points for High Hydrogen Content Fuels

Impact of a Yttria-Stabilized Zirconia Thermal Barrier Coating on HCCI Engine Combustion, Emissions, and Efficiency

Gas Turbines: Cycle Innovations

Power Plant Output Augmentation by Evaporative Cooling Based on HRSG Blowdown Water Recycling in the Kingdom of Saudi Arabia: A Novel Approach

Gas Turbines: Structures and Dynamics

Effect of Recess Shape on the Performance of a High-Speed Hybrid Journal Bearing

Numerical Investigation of Creep–Fatigue Behavior in a Steam Turbine Inlet Valve Under Cyclic Thermomechanical Loading

Gas Turbines: Turbomachinery

A Comparison of Single and Double Lip Rim Seal Geometries

Flowfield and Performance Analysis of a Three-Dimensional TBCC Exhaust Nozzle

Enhancement to the Traditional Ellipse Law for More Accurate Modeling of a Turbine With a Finite Number of Stages

Internal Combustion Engines

Application of Improved Artificial Bee Colony Algorithm to the Parameter Optimization of a Diesel Engine With Pilot Fuel Injections

Quasi-Dimensional Diesel Engine Combustion Modeling With Improved Diesel Spray Tip Penetration, Ignition Delay, and Heat Release Submodels

Model Predictive Engine Speed Control for Transmissions With Dog Clutches

A Combined Organic Rankine Cycle With Double Modes Used for Internal Combustion Engine Waste Heat Recovery

Detached Eddy Simulation Simulation of Asymmetrical Flow in a High Pressure Diesel Injector

Development and Performance Measurements of a Beta-Type Free-Piston Stirling Engine Along With Dynamic Model Predictions

Technical Brief

A Detailed Modular Governor-Turbine Model for Multiple-Spool Gas Turbine With Scrutiny of Bleeding Effect

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

Issues

Research Papers

Gas Turbines: Aircraft Engine

Gas Turbines: Combustion, Fuels, and Emissions

Gas Turbines: Cycle Innovations

Gas Turbines: Structures and Dynamics

Gas Turbines: Turbomachinery

Internal Combustion Engines

Technical Brief

Email alerts

RSS Feeds

ASME Journals

ASME Conference Proceedings

ASME eBooks

Resources

Opportunities

This Feature Is Available To Subscribers Only