Skip Nav Destination
Issues
September 2011
ISSN 0742-4795
EISSN 1528-8919
In this Issue
Research Papers
Gas Turbines: Ceramics
Compressive Creep Testing of Thermal Barrier Coated Nickel-Based Superalloys
J. Eng. Gas Turbines Power. September 2011, 133(9): 091301.
doi: https://doi.org/10.1115/1.4002816
Topics:
Coatings
,
Creep
,
Nanoindentation
,
Nickel
,
Stress
,
Superalloys
,
Temperature
,
Testing
,
Young's modulus
,
Mechanical properties
Gas Turbines: Combustion, Fuels, and Emissions
Laminar Flame Speed Measurements and Modeling of Pure Alkanes and Alkane Blends at Elevated Pressures
William Lowry, Jaap de Vries, Michael Krejci, Eric Petersen, Zeynep Serinyel, Wayne Metcalfe, Henry Curran, Gilles Bourque
J. Eng. Gas Turbines Power. September 2011, 133(9): 091501.
doi: https://doi.org/10.1115/1.4002809
Gas Turbine Combustor Flow Structure Control Through Modification of the Chamber Geometry
J. Eng. Gas Turbines Power. September 2011, 133(9): 091502.
doi: https://doi.org/10.1115/1.4002881
Topics:
Combustion chambers
,
Flow (Dynamics)
,
Domes (Structural elements)
,
Geometry
,
Jets
,
Combustion
Establishment of a High Quality Database for the Acoustic Modeling of Perforated Liners
J. Eng. Gas Turbines Power. September 2011, 133(9): 091503.
doi: https://doi.org/10.1115/1.4002891
Topics:
Acoustics
,
Damping
,
Flow (Dynamics)
,
Porosity
,
Databases
,
Pressure
,
Ducts
,
Mach number
,
Energy dissipation
,
Orifices
Gas Turbines: Heat Transfer
Heat Transfer and Pressure Losses of W-Shaped Small Ribs at High Reynolds Numbers for Combustor Liner
J. Eng. Gas Turbines Power. September 2011, 133(9): 091901.
doi: https://doi.org/10.1115/1.4002878
Topics:
Combustion chambers
,
Flow (Dynamics)
,
Heat transfer
,
Heat transfer coefficients
,
Reynolds number
,
Pressure
,
Cooling
,
Friction
Gas Turbines: Industrial & Cogeneration
Gas Turbine Power Augmentation: Parametric Study Relating to Fog Droplet Size and Its Influence on Evaporative Efficiency
J. Eng. Gas Turbines Power. September 2011, 133(9): 092001.
doi: https://doi.org/10.1115/1.4002883
Topics:
Drops
,
Nozzles
,
Water
,
Gas turbines
Gas Turbines: Manufacturing, Materials, and Metallurgy
Fatigue Properties of Narrow and Wide Gap Braze Repaired Joints
J. Eng. Gas Turbines Power. September 2011, 133(9): 092101.
doi: https://doi.org/10.1115/1.4002824
Topics:
Alloys
,
Fatigue
,
Fatigue properties
,
Fractography
,
Fracture (Materials)
,
Fracture (Process)
,
Fatigue testing
,
Gas turbines
High-Temperature Performance of Cast CF8C-Plus Austenitic Stainless Steel
J. Eng. Gas Turbines Power. September 2011, 133(9): 092102.
doi: https://doi.org/10.1115/1.4002828
Topics:
Alloys
,
Creep
,
High temperature
,
Oxidation
,
Stainless steel
,
Exhaust systems
,
Mechanical properties
,
Steel
,
Gas turbines
,
Rupture
Gas Turbines: Structures and Dynamics
Experimental Analyses of a First Generation Foil Bearing: Startup Torque and Dynamic Coefficients
J. Eng. Gas Turbines Power. September 2011, 133(9): 092501.
doi: https://doi.org/10.1115/1.4002909
Topics:
Bearings
,
Foil bearings
,
Rotation
,
Stress
,
Torque
,
Stiffness
,
Excitation
,
Experimental analysis
A Probabilistic Secondary Flow System Design Process for Gas Turbine Engines
J. Eng. Gas Turbines Power. September 2011, 133(9): 092502.
doi: https://doi.org/10.1115/1.4002829
Topics:
Design
,
Failure
,
Flow (Dynamics)
,
Gas turbines
,
Probability
,
Engines
,
Sensitivity analysis
,
Failure mechanisms
,
Cooling
,
Risk
Identification and Prediction of Force Coefficients in a Five-Pad and Four-Pad Tilting Pad Bearing for Load-on-Pad and Load-Between-Pad Configurations
J. Eng. Gas Turbines Power. September 2011, 133(9): 092503.
doi: https://doi.org/10.1115/1.4002864
Topics:
Bearings
,
Stiffness
,
Rotors
,
Temperature
,
Stress
Friction Factor Behavior From Flat-Plate Tests of Smooth and Hole-Pattern Roughened Surfaces With Supply Pressures up to 84 bars
J. Eng. Gas Turbines Power. September 2011, 133(9): 092504.
doi: https://doi.org/10.1115/1.4002882
Topics:
Clearances (Engineering)
,
Flat plates
,
Flow (Dynamics)
,
Friction
,
Plates (structures)
,
Pressure
,
Manufacturing
Internal Combustion Engines
Validation of the Fuel Saving Potential of Downsized and Supercharged Hybrid Pneumatic Engines Using Vehicle Emulation Experiments
J. Eng. Gas Turbines Power. September 2011, 133(9): 092801.
doi: https://doi.org/10.1115/1.4002910
An Experimental Investigation of Low-Octane Gasoline in Diesel Engines
J. Eng. Gas Turbines Power. September 2011, 133(9): 092802.
doi: https://doi.org/10.1115/1.4002915
Topics:
Combustion
,
Diesel
,
Diesel engines
,
Emissions
,
Fuels
,
Gasoline
,
Nitrogen oxides
,
Pressure
,
Stress
,
Exhaust gas recirculation
Optical Investigation Into Wall Wetting From Late-Cycle Post-Injections Used for Diesel Particulate Filter Regeneration
J. Eng. Gas Turbines Power. September 2011, 133(9): 092803.
doi: https://doi.org/10.1115/1.4002917
Topics:
Biodiesel
,
Cycles
,
Cylinders
,
Diesel
,
Engines
,
Exhaust systems
,
Filters
,
Fuels
,
Imaging
,
Particulate matter
Spark Advance Real-Time Optimization Based on Combustion Analysis
J. Eng. Gas Turbines Power. September 2011, 133(9): 092804.
doi: https://doi.org/10.1115/1.4002919
Topics:
Combustion
,
Control equipment
,
Cycles
,
Errors
,
Engines
,
Calibration
,
Optimization
Modeling Species Inhibition of NO Oxidation in Urea-SCR Catalysts for Diesel Engine Control
J. Eng. Gas Turbines Power. September 2011, 133(9): 092805.
doi: https://doi.org/10.1115/1.4002894
Topics:
Catalysts
,
Diesel engines
,
Modeling
,
Nitrogen oxides
,
Oxidation
,
Temperature
,
Water
,
Storage
Comparison of Propane and Methane Performance and Emissions in a Turbocharged Direct Injection Dual Fuel Engine
J. Eng. Gas Turbines Power. September 2011, 133(9): 092806.
doi: https://doi.org/10.1115/1.4002895
Topics:
Brakes
,
Diesel
,
Emissions
,
Engines
,
Fuels
,
Methane
,
Stress
,
Nitrogen oxides
,
Smoke
,
Combustion
Power Engineering
A One-Dimensional Numerical Model for the Momentum Exchange in Regenerative Pumps
J. Eng. Gas Turbines Power. September 2011, 133(9): 093001.
doi: https://doi.org/10.1115/1.4002890
Topics:
Flow (Dynamics)
,
Momentum
,
Pumps
Technical Briefs
Modeling of the Constitutive Behavior of Inconel 718 at Intermediate Temperatures
J. Eng. Gas Turbines Power. September 2011, 133(9): 094501.
doi: https://doi.org/10.1115/1.4002913
Topics:
Hardening
,
Modeling
,
Relaxation (Physics)
,
Stress
,
Temperature
,
Fatigue cracks
,
Cycles
Email alerts
RSS Feeds
In-Situ Species Concentration Measurements In Ammonia-Mix Flames Using Ftir Spectroscopy
J. Eng. Gas Turbines Power
Temperature Dependence of Aerated Turbine Lubricating Oil Degradation from a Lab-Scale Test Rig
J. Eng. Gas Turbines Power
Multi-Disciplinary Surrogate-Based Optimization of a Compressor Rotor Blade Considering Ice Impact
J. Eng. Gas Turbines Power
Experimental Investigations on Carbon Segmented Seals With Smooth and Pocketed Pads
J. Eng. Gas Turbines Power