Abstract

This paper delves into the potential of additive manufacturing (AM) technologies, focusing on the utilization of laser powder bed fusion (LPBF) to optimize the manufacturing process for Mar-M-509, a cobalt-based superalloy, in aeroderivative industrial gas turbine nozzle guide vanes. While Mar-M-509 offers exceptional properties for high-temperature applications, the rapid cooling rates inherent in LPBF introduce significant residual stresses, leading to poor success rates below 50%. The study systematically addresses this challenge by proposing a comprehensive methodology to optimize LPBF parameters. By fine-tuning processing conditions, including elevating the powder bed and build chamber temperatures, the research achieved notable reductions in residual stresses by up to 55%. Computational simulations played a pivotal role in predicting deformations and thermal signatures, enabling proactive adjustments to process conditions, ultimately enhancing part quality and process reliability. Validation through successful printing with a yield exceeding 75% underscores the effectiveness of this approach. Moreover, the study suggests the broader applicability of these optimization strategies beyond Mar-M-509, paving the way for advancements in AM techniques across diverse materials and industrial sectors. This research not only presents a robust solution for mitigating residual stresses in LPBF-produced components but also showcases a proactive methodology that promises significant implications for additive manufacturing's future advancements and applicability.

References

1.
Leung
,
C. L. A.
,
Marussi
,
S.
,
Towrie
,
M.
,
del Val Garcia
,
J.
,
Atwood
,
R. C.
,
Bodey
,
A. J.
,
Jones
,
J. R.
,
Withers
,
P. J.
, and
Lee
,
P. D.
,
2018
, “
Laser-Matter Interactions in Additive Manufacturing of Stainless Steel SS316 L and 13-93 Bioactive Glass Revealed by In Situ X-Ray Imaging
,”
Addit. Manuf.
,
24
, pp.
647
657
.10.1016/j.addma.2018.08.025
2.
Buchbinder
,
D.
,
Meiners
,
W.
,
Pirch
,
N.
,
Wissenbach
,
K.
, and
Schrage
,
J.
,
2014
, “
Investigation on Reducing Distortion by Preheating During Manufacture of Aluminum Components Using Selective Laser Melting
,”
J. Laser Appl.
,
26
(
1
), p.
012004
.10.2351/1.4828755
3.
Peter
,
N.
,
Pitts
,
Z.
,
Thompson
,
S.
, and
Saharan
,
A.
,
2020
, “
Benchmarking Build Simulation Software for Laser Powder Bed Fusion of Metals
,”
Addit. Manuf.
,
36
, p.
101531
.10.1016/j.addma.2020.101531
4.
Pardhi, Y., 2022, “New Parts for Legacy Turbomachinery,” Empowdering Pumps and Equipment, Tuscaloosa, AL, accessed Nov. 12, 2023, https://empoweringpumps.com/sulzer-new-parts-for-legacy-turbomachinery/
5.
Ferreri
,
N. C.
,
Ghorbanpour
,
S.
,
Bhowmik
,
S.
,
Lussier
,
R.
,
Bicknell
,
J.
,
Patterson
,
B. M.
, and
Knezevic
,
M.
,
2019
, “
Effects of Build Orientation and Heat Treatment on the Evolution of Microstructure and Mechanical Properties of Alloy Mar-M-509 Fabricated Via Laser Powder Bed Fusion
,”
Int. J. Plast.
,
121
, pp.
116
133
.10.1016/j.ijplas.2019.06.002
6.
Krewinkel
,
R.
,
Such
,
A.
,
de la Torre
,
A. O.
,
Wiedermann
,
A.
,
Castillo
,
D.
,
Rodriguez
,
S. A.
,
Schleifenbaum
,
J. H.
, and
Blaswich
,
M.
,
2020
, “
Design and Characterization of Additively Manufactured NGVs Operated in a Small Industrial Gas Turbine
,”
Int. J. Gas Turbine, Propul. Power Syst.
,
11
(
4
), pp.
36
44
.10.38036/jgpp.11.4_36
7.
Otubusin
,
A.
,
Wood
,
P.
,
Appleby
,
J.
, and
Adamczuk
,
R.
,
2018
, “
Analysis of Parameters Influencing Build Accuracy of a SLM Printed Compressor Outlet Guide Vane
,”
ASME
Paper No. GT2018-75548.10.1115/GT2018-75548
8.
Kalyanasundaram
,
V.
,
Holdsworth
,
S. R.
,
Pardhi
,
Y.
,
Soothill
,
C.
, and
Hosseini
,
E.
,
2023
, “
Influence of Heat Treatment on the Microstructure and Creep Response of Additively Manufactured Cobalt Superalloy Mar M509
,”
Mater. High Temp.
,
40
(
6
), pp.
506
517
.10.1080/09603409.2024.2301853
9.
Aconity MINI User Manual, Source Aconity Manual, Aconity3D GmbH, Herzogenrath, Germany.
10.
Müller
,
B.
, and
Renz
,
U.
,
2001
, “
Development of a Fast Fiber-Optic Two-Color Pyrometer for the Temperature Measurement of Surfaces With Varying Emissivities
,”
Rev. Sci. Instrum.
,
72
(
8
), pp.
3366
3374
.10.1063/1.1384448
11.
Baumeister, J., Source Amphyon Documentation, Simulation Aided Laser Beam Melting With Amphyon, Additive Works GmbH, Bremen, Germany.
You do not currently have access to this content.